Products
CAT-H3910-CH8172 Automotive Housings  1
  • Connector & Housing Type Housing for Female Terminals
  • Connector System Wire-to-Wire
  • Sealable Yes
  • Hybrid Connector No
  • Primary Locking Feature Contact Retainer
  • Connector & Contact Terminates To Wire & Cable
  • Number of Positions 3
  • Blank Cavity Position 0
  • Operating Voltage 250
  • Operating Voltage 250
  • Nominal Voltage Architecture 12
  • Body Material PA GF
  • Cable Exit Angle 180°
  • Primary Product Color Black
  • Mating Pin Diameter 1.59
  • Contact Current Rating (Max) 13
  • Mating Alignment Type Polarized
  • Strain Relief Add By Accessory
  • Connector Mounting Type Bulkhead
  • Terminal Position Assurance No
  • Mounting Feature With
  • Accepts Wire Insulation Diameter Range 1.35 – 3.05
  • Product Height 21.77
  • Product Length 40.61
  • Product Width 21.77
  • Operating Temperature (Max) 125
  • Operating Temperature Range -55 – 125
  • Circuit Application Power & Signal
  • UL Flammability Rating 20mm Flame Test per Standard UL-94
  • Degree of Protection IP68
  • Packaging Method Box
  • Packaging Quantity 250
  • Connector Position Assurance Capable No
  • Serviceable Yes
CAT-D48-ST273 Automotive Terminals  1
  • Sealable No
  • Primary Locking Feature On the Terminal
  • Automotive Terminal Wire Type Copper
  • Automotive Terminal Seal Type Family Seal or Unsealed
  • Crimp Type Indent
  • Typical Current Rating 7.5
  • Terminal & Splice Type Pin
  • Mating Pin Diameter 1.02
  • Automotive Terminal Interface Plating Gold (Au)
  • Contact Termination Area Plating Material Gold (Au)
  • Automotive Terminal Termination Method Crimp
  • Wire Size 4
  • Wire Size .5
  • Wire Size Search .5
  • Wire Size Search 4
  • PCB Hole Diameter .89 – .99
  • Operating Temperature (Max) 80
  • Operating Temperature Range -55 – 125
  • Packaging Quantity 5000
  • Packaging Method Box
  • Terminal Transmits 0 – 24 A (Low Power)
  • Customer Preferred Contact Yes
CAT-D487-CH8172 Automotive Housings  1
  • Connector & Housing Type Housing for Female Terminals
  • Connector System Bus Bar-to-Wire
  • Sealable Yes
  • Hybrid Connector No
  • Primary Locking Feature Integrated in Housing
  • Connector & Contact Terminates To Bus Bar
  • Number of Positions 2
  • Number of Rows 1
  • Blank Cavity Position 0
  • Operating Voltage 250
  • Operating Voltage 12
  • Nominal Voltage Architecture 12
  • Body Material PA GF
  • Cable Exit Angle 180
  • Primary Product Color Black
  • Connector Code 2
  • Mating Pin Diameter 1
  • Contact Current Rating (Max) 7.5
  • Mating Alignment Type Polarized
  • Strain Relief Add By Accessory
  • Connector Mounting Type Bulkhead
  • Terminal Position Assurance Yes
  • Mounting Feature Without
  • Centerline (Pitch) 4.19
  • Accepts Wire Insulation Diameter Range 1.35 – 3.05
  • Row-to-Row Spacing 4.45
  • Product Height 15.77
  • Product Length 15.01
  • Product Width 11.01
  • Operating Temperature (Max) 70
  • Operating Temperature Range -55 – 125
  • Circuit Application Power & Signal
  • UL Flammability Rating 12mm Flame Test per Standard UL-94
  • Degree of Protection IP68
  • Agency/Standard SAE J2030
  • Packaging Method Box
  • Packaging Quantity 96
  • Connector Position Assurance Capable No
  • Serviceable Yes
CAT-D485-CH8172 Automotive Housings  1
  • Connector & Housing Type Housing for Female Terminals
  • Connector System Component-to-Wire
  • Sealable Yes
  • Hybrid Connector No
  • Primary Locking Feature Integrated in Housing
  • Connector & Contact Terminates To Wire & Cable
  • Number of Positions 2
  • Number of Rows 1
  • Blank Cavity Position 0
  • Operating Voltage 250
  • Operating Voltage 250
  • Nominal Voltage Architecture 12
  • Body Material PA GF
  • Cable Exit Angle 180°
  • Primary Product Color Black
  • Connector Code A
  • Mating Pin Diameter 1.02
  • Contact Current Rating (Max) 7.5
  • Mating Alignment Type Polarized
  • Strain Relief Add By Accessory
  • Connector Mounting Type Cable Mount (Free-Hanging)
  • Terminal Position Assurance Yes
  • Mounting Feature Without
  • Centerline (Pitch) 4.19
  • Accepts Wire Insulation Diameter Range 1.35 – 3.05
  • Row-to-Row Spacing 7.11
  • Product Height 12.9
  • Product Length 27.56
  • Product Width 12.07
  • Operating Temperature (Max) 125
  • Operating Temperature Range -55 – 125
  • Circuit Application Power & Signal
  • UL Flammability Rating 20mm Flame Test per Standard UL-94
  • Degree of Protection IP68
  • Agency/Standard SAE J2030
  • Packaging Method Box
  • Packaging Quantity 200
  • Connector Position Assurance Capable No
  • Serviceable No
CAT-D485-W416 Automotive Connector Locks & Position Assurance  1
  • Connector & Contact Retention Accessory Type Secondary Lock
  • Connector System Wire-to-Wire
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Number of Positions 2
  • Primary Product Color Black
  • Primary Product Material PBT
  • Operating Temperature Range -55 – 125
  • Circuit Application Power & Signal
  • UL Flammability Rating UL 94HB
  • Packaging Method Box
  • Packaging Quantity 15000
  • Serviceable Yes
CAT-D487-W416 Automotive Connector Locks & Position Assurance  1
  • Connector & Contact Retention Accessory Type Secondary Lock
  • Connector System Wire-to-Board
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Number of Positions 2
  • Primary Product Color Black
  • Primary Product Material PBT
  • Operating Temperature Range -55 – 125
  • Circuit Application Power & Signal
  • UL Flammability Rating UL 94HB
  • Packaging Method Box
  • Packaging Quantity 1
  • Serviceable Yes
CAT-D48-SFT273 Automotive Terminals  1
  • Sealable No
  • Primary Locking Feature On the Terminal
  • Automotive Terminal Wire Type Copper
  • Automotive Terminal Seal Type Family Seal or Unsealed
  • Crimp Type F-Crimp
  • Typical Current Rating 7.5
  • Terminal & Splice Type Pin
  • Mating Pin Diameter 1.02
  • Automotive Terminal Interface Plating Gold (Au)
  • Contact Termination Area Plating Material Tin (Sn)
  • Automotive Terminal Termination Method F-Crimp
  • Wire Size 10
  • Wire Size .35 – 1.5
  • Wire Size Search .35
  • Wire Size Search 10
  • Wire Insulation Diameter 1.9 – 3.55
  • Operating Temperature (Max) 125
  • Operating Temperature Range -55 – 125
  • Packaging Quantity 4000
  • Packaging Method Reel
  • Terminal Transmits 0 – 24 A (Low Power)
  • Customer Preferred Contact Yes
Story
Solutions for SAE J1939 Specifications

Application

Solutions for SAE J1939 Specifications

TE provides connector options that are specifically designed to meet CAN systems under the SAE J1939 standard.

Anything that can be measured and controlled electronically can be monitored and directed by a CAN system. CAN systems, or Controller Area Networks, are multiplex data systems. Multiplexing allows multiple data signals to travel on the same wires, integrating separate electronic systems and applications to a single point control and monitoring system. Using signals sent over a serial network, CAN systems provide instantaneous monitoring of diagnostic and control systems. The SAE J1939 is a specific type of CAN that defines the communications pathways for vehicle networks serving the automotive and diesel engine markets. TE offers the DEUTSCH DT, DTM, HD10, HD30 and HDBox connector options to meet the J1939 standards. 

  1. On-Highway Connectivity Solutions (English)

TE Connectivity (TE) is a world leader in supporting today’s increasingly complex and sophisticated equipment and applications. Our comprehensive portfolio of rugged sensors, terminals, connectors, relays, and hybrid and electric mobility solutions are designed to withstand the harsh conditions of the on-highway industry.

Related Materials
Solutions for SAE J1939 Specifications

Application

Solutions for SAE J1939 Specifications

TE provides connector options that are specifically designed to meet CAN systems under the SAE J1939 standard.

Anything that can be measured and controlled electronically can be monitored and directed by a CAN system. CAN systems, or Controller Area Networks, are multiplex data systems. Multiplexing allows multiple data signals to travel on the same wires, integrating separate electronic systems and applications to a single point control and monitoring system. Using signals sent over a serial network, CAN systems provide instantaneous monitoring of diagnostic and control systems. The SAE J1939 is a specific type of CAN that defines the communications pathways for vehicle networks serving the automotive and diesel engine markets. TE offers the DEUTSCH DT, DTM, HD10, HD30 and HDBox connector options to meet the J1939 standards. 

  1. On-Highway Connectivity Solutions (English)

TE Connectivity (TE) is a world leader in supporting today’s increasingly complex and sophisticated equipment and applications. Our comprehensive portfolio of rugged sensors, terminals, connectors, relays, and hybrid and electric mobility solutions are designed to withstand the harsh conditions of the on-highway industry.

CAT-H3910-CH8172 Automotive Housings  1
  • Connector & Housing Type Housing for Female Terminals
  • Connector System Wire-to-Wire
  • Sealable Yes
  • Hybrid Connector No
  • Primary Locking Feature Contact Retainer
  • Connector & Contact Terminates To Wire & Cable
  • Number of Positions 3
  • Blank Cavity Position 0
  • Operating Voltage 250
  • Operating Voltage 250
  • Nominal Voltage Architecture 12
  • Body Material PA GF
  • Cable Exit Angle 180°
  • Primary Product Color Black
  • Mating Pin Diameter 1.59
  • Contact Current Rating (Max) 13
  • Mating Alignment Type Polarized
  • Strain Relief Add By Accessory
  • Connector Mounting Type Bulkhead
  • Terminal Position Assurance No
  • Mounting Feature With
  • Accepts Wire Insulation Diameter Range 1.35 – 3.05
  • Product Height 21.77
  • Product Length 40.61
  • Product Width 21.77
  • Operating Temperature (Max) 125
  • Operating Temperature Range -55 – 125
  • Circuit Application Power & Signal
  • UL Flammability Rating 20mm Flame Test per Standard UL-94
  • Degree of Protection IP68
  • Packaging Method Box
  • Packaging Quantity 250
  • Connector Position Assurance Capable No
  • Serviceable Yes
CAT-D48-ST273 Automotive Terminals  1
  • Sealable No
  • Primary Locking Feature On the Terminal
  • Automotive Terminal Wire Type Copper
  • Automotive Terminal Seal Type Family Seal or Unsealed
  • Crimp Type Indent
  • Typical Current Rating 7.5
  • Terminal & Splice Type Pin
  • Mating Pin Diameter 1.02
  • Automotive Terminal Interface Plating Gold (Au)
  • Contact Termination Area Plating Material Gold (Au)
  • Automotive Terminal Termination Method Crimp
  • Wire Size 4
  • Wire Size .5
  • Wire Size Search .5
  • Wire Size Search 4
  • PCB Hole Diameter .89 – .99
  • Operating Temperature (Max) 80
  • Operating Temperature Range -55 – 125
  • Packaging Quantity 5000
  • Packaging Method Box
  • Terminal Transmits 0 – 24 A (Low Power)
  • Customer Preferred Contact Yes
CAT-D487-CH8172 Automotive Housings  1
  • Connector & Housing Type Housing for Female Terminals
  • Connector System Bus Bar-to-Wire
  • Sealable Yes
  • Hybrid Connector No
  • Primary Locking Feature Integrated in Housing
  • Connector & Contact Terminates To Bus Bar
  • Number of Positions 2
  • Number of Rows 1
  • Blank Cavity Position 0
  • Operating Voltage 250
  • Operating Voltage 12
  • Nominal Voltage Architecture 12
  • Body Material PA GF
  • Cable Exit Angle 180
  • Primary Product Color Black
  • Connector Code 2
  • Mating Pin Diameter 1
  • Contact Current Rating (Max) 7.5
  • Mating Alignment Type Polarized
  • Strain Relief Add By Accessory
  • Connector Mounting Type Bulkhead
  • Terminal Position Assurance Yes
  • Mounting Feature Without
  • Centerline (Pitch) 4.19
  • Accepts Wire Insulation Diameter Range 1.35 – 3.05
  • Row-to-Row Spacing 4.45
  • Product Height 15.77
  • Product Length 15.01
  • Product Width 11.01
  • Operating Temperature (Max) 70
  • Operating Temperature Range -55 – 125
  • Circuit Application Power & Signal
  • UL Flammability Rating 12mm Flame Test per Standard UL-94
  • Degree of Protection IP68
  • Agency/Standard SAE J2030
  • Packaging Method Box
  • Packaging Quantity 96
  • Connector Position Assurance Capable No
  • Serviceable Yes
CAT-D485-CH8172 Automotive Housings  1
  • Connector & Housing Type Housing for Female Terminals
  • Connector System Component-to-Wire
  • Sealable Yes
  • Hybrid Connector No
  • Primary Locking Feature Integrated in Housing
  • Connector & Contact Terminates To Wire & Cable
  • Number of Positions 2
  • Number of Rows 1
  • Blank Cavity Position 0
  • Operating Voltage 250
  • Operating Voltage 250
  • Nominal Voltage Architecture 12
  • Body Material PA GF
  • Cable Exit Angle 180°
  • Primary Product Color Black
  • Connector Code A
  • Mating Pin Diameter 1.02
  • Contact Current Rating (Max) 7.5
  • Mating Alignment Type Polarized
  • Strain Relief Add By Accessory
  • Connector Mounting Type Cable Mount (Free-Hanging)
  • Terminal Position Assurance Yes
  • Mounting Feature Without
  • Centerline (Pitch) 4.19
  • Accepts Wire Insulation Diameter Range 1.35 – 3.05
  • Row-to-Row Spacing 7.11
  • Product Height 12.9
  • Product Length 27.56
  • Product Width 12.07
  • Operating Temperature (Max) 125
  • Operating Temperature Range -55 – 125
  • Circuit Application Power & Signal
  • UL Flammability Rating 20mm Flame Test per Standard UL-94
  • Degree of Protection IP68
  • Agency/Standard SAE J2030
  • Packaging Method Box
  • Packaging Quantity 200
  • Connector Position Assurance Capable No
  • Serviceable No
CAT-D485-W416 Automotive Connector Locks & Position Assurance  1
  • Connector & Contact Retention Accessory Type Secondary Lock
  • Connector System Wire-to-Wire
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Number of Positions 2
  • Primary Product Color Black
  • Primary Product Material PBT
  • Operating Temperature Range -55 – 125
  • Circuit Application Power & Signal
  • UL Flammability Rating UL 94HB
  • Packaging Method Box
  • Packaging Quantity 15000
  • Serviceable Yes
CAT-D487-W416 Automotive Connector Locks & Position Assurance  1
  • Connector & Contact Retention Accessory Type Secondary Lock
  • Connector System Wire-to-Board
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Number of Positions 2
  • Primary Product Color Black
  • Primary Product Material PBT
  • Operating Temperature Range -55 – 125
  • Circuit Application Power & Signal
  • UL Flammability Rating UL 94HB
  • Packaging Method Box
  • Packaging Quantity 1
  • Serviceable Yes
CAT-D48-SFT273 Automotive Terminals  1
  • Sealable No
  • Primary Locking Feature On the Terminal
  • Automotive Terminal Wire Type Copper
  • Automotive Terminal Seal Type Family Seal or Unsealed
  • Crimp Type F-Crimp
  • Typical Current Rating 7.5
  • Terminal & Splice Type Pin
  • Mating Pin Diameter 1.02
  • Automotive Terminal Interface Plating Gold (Au)
  • Contact Termination Area Plating Material Tin (Sn)
  • Automotive Terminal Termination Method F-Crimp
  • Wire Size 10
  • Wire Size .35 – 1.5
  • Wire Size Search .35
  • Wire Size Search 10
  • Wire Insulation Diameter 1.9 – 3.55
  • Operating Temperature (Max) 125
  • Operating Temperature Range -55 – 125
  • Packaging Quantity 4000
  • Packaging Method Reel
  • Terminal Transmits 0 – 24 A (Low Power)
  • Customer Preferred Contact Yes