1051644-1 RF Connectors  1
  • RF Interface SMA
  • RF Connector Style Plug
  • Connector System Cable-to-Cable
  • Sealable Yes
  • Connector & Contact Terminates To Wire & Cable
  • Connector Seal Type Gasket
  • Port Configuration Single Port
  • Number of Positions 1
  • Number of Coaxial Contacts 1
  • Impedance 50
  • Cable Connector Orientation Straight
  • Body Material Stainless Steel
  • Body Plating Material Gold over Nickel
  • RF Connector Center Contact Plating Material Gold over Copper
  • RF Connector Center Contact Material Beryllium Copper
  • RF Connector Contact Configuration Not Captivated
  • Connector Product Type Connector Assembly
  • Ferrule Material Soft Copper
  • Termination Method to Wire & Cable Solder
  • RF Connector Coupling Mechanism Threaded
  • Connector Mounting Type Cable Mount (Free-Hanging)
  • RF Contact Captivation Method Mechanical
  • Detent Without
  • Product Length 30.15
  • RF Connector Mated Outer Diameter (Approximate) 6.35
  • Cable Type RG 174
  • Operating Temperature Range -65 – 165
  • Operating Frequency 12.4
  • Packaging Method Bag
  • Dielectric Material TFE Fluorocarbon
  • Coupling Nut Base Material Stainless Steel
  • Additional Features Shrink Tubing
  • Coupling Nut Plating Finish Passivated
1057341-1 Between Series Adapters  1
  • Side A Interface OSM
  • Side A Gender Jack
  • Side B Interface OSN
  • Side B Gender Jack
  • Connector System Wire-to-Wire
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Number of Positions 1
  • Body Style Straight
  • Body Material Stainless Steel
  • Material Stainless Steel
  • RF Connector Center Contact Material Beryllium Copper
  • RF Connector Center Contact Plating Material Gold
  • Connector Mounting Type Bulkhead
  • Circuit Application Power & Signal
  • Dielectric Material TFE Fluorocarbon
1996705-4 PCB RF Modules
ANSI/VITA 67.0-2012 ANSI/VITA 67.2-2012
  • RF Interface SMPM
  • Number of Coaxial Contacts 8
  • Body Material Stainless Steel
  • Plating Finish Passivated
  • Mounting Angle Right Angle
  • Connector Mounting Type Board Mount
  • Module Mounting Type Screw
  • RF Contact Spacing 6.1
  • VITA 67 Yes
5-1634532-1 In-Series Adapters
  • RF Connector Type BNC
  • Connector System Cable-to-Cable
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Grade Commercial
  • Isolated Ground No
  • Number of Positions 1
  • Impedance 50
  • Body Plating Material Nickel
  • Body Style Tee
  • Body Insulation With
  • Body Material Zinc Alloy
  • Body Shape Circular
  • RF Connector Center Contact Material Brass
  • RF Connector Center Contact Plating Material Gold
  • Connector Mounting Type Bulkhead
  • Operating Temperature Range -55 – 85
  • Circuit Application Power & Signal
  • For Use With ZDC/BNC Connector
  • Packaging Method Tray
2101510-2 PCB RF Modules  1
ANSI/VITA 67.0-2012 ANSI/VITA 67.1-2012
  • RF Interface OSMM
  • Connector System Board-to-Board
  • Connector & Contact Terminates To Wire & Cable
  • Number of Coaxial Contacts 4
  • Number of Positions 4
  • Impedance 50
  • Body Material Stainless Steel
  • Plating Finish Passivated
  • Mounting Angle Vertical
  • Connector Mounting Type Board Mount
  • Centerline (Pitch) 6.1
  • Operating Temperature Range -65 – 165
  • Circuit Application Signal
  • VITA 67 Yes
1055070-1 In-Series Adapters  1
  • RF Connector Type SMA
  • Connector System Cable-to-Cable
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Isolated Ground No
  • Number of Positions 1
  • Impedance 50
  • Frequency 18
  • Body Style Right Angle
  • Body Insulation Without
  • Body Plating Finish Passivated
  • Body Material Stainless Steel
  • RF Connector Center Contact Material Beryllium Copper
  • RF Connector Center Contact Plating Material Gold over Copper
  • RF Connector Contact Configuration Captivated Contacts
  • RF Contact Captivation Method Mechanical
  • Connector Mounting Type Bulkhead
  • Coupling Nut Material Stainless Steel
  • Length 14.9
  • Operating Temperature Range -65 – 165
  • Circuit Application Power & Signal
  • Packaging Method Package
  • Dielectric Material TFE Fluorocarbon
5-1814816-1 RF Connectors
  • RF Interface UHF
  • RF Connector Style Jack
  • Connector System Cable-to-Panel
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Port Configuration Single Port
  • Number of Positions 1
  • Number of Coaxial Contacts 1
  • Impedance 50
  • Cable Connector Orientation Straight
  • Body Material Zinc
  • Body Plating Material Nickel
  • RF Connector Center Contact Plating Material Gold
  • RF Connector Center Contact Material Brass
  • Termination Method to Wire & Cable Solder
  • Panel Mount Feature Type Flange
  • RF Connector Coupling Mechanism Threaded
  • Connector Mounting Type Panel
  • RF Contact Captivation Method Solder
  • Detent Without
  • RF Connector Mated Outer Diameter (Approximate) 15.5
  • Operating Temperature Range -55 – 85
  • Packaging Method Package
  • Dielectric Material PBT
5228226-1 In-Series Adapters
  • RF Connector Type BNC
  • Connector System Cable-to-Cable
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Grade Commercial
  • Isolated Ground No
  • Number of Positions 1
  • Impedance 50
  • Body Plating Material Nickel
  • Body Style Straight
  • Body Insulation Without
  • Body Material Zinc
  • Body Shape Vertical-Unflanged Base
  • RF Connector Center Contact Material Phosphor Bronze
  • RF Connector Center Contact Plating Material Gold
  • Panel Mount Feature Type Bulkhead
  • Connector Mounting Type Bulkhead
  • Panel Attachment Style Front Mount
  • Circuit Application Power & Signal
  • Packaging Method Package
  • Dielectric Material Polyethylene
  • Comment If an Insulating Bushing is required, see Part Number 330620.
5-1634526-1 In-Series Adapters  1
  • RF Connector Type BNC
  • Connector System Cable-to-Cable
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Grade Commercial
  • Isolated Ground No
  • Number of Positions 1
  • Impedance 50
  • Body Plating Material Nickel
  • Body Style Elbow
  • Body Insulation With
  • Body Material Zinc Alloy
  • RF Connector Center Contact Material Brass
  • RF Connector Center Contact Plating Material Gold
  • Connector Mounting Type Bulkhead
  • Operating Temperature Range -55 – 85
  • Circuit Application Power & Signal
  • Packaging Method Tray
5-1634535-1 In-Series Adapters  1
  • RF Connector Type BNC
  • Connector System Cable-to-Cable
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Grade Commercial
  • Isolated Ground No
  • Number of Positions 1
  • Impedance 50
  • Body Plating Material Nickel
  • Body Style Tee
  • Body Insulation With
  • Body Material Zinc Alloy
  • RF Connector Center Contact Material Phosphor Bronze
  • RF Connector Center Contact Plating Material Gold
  • Connector Mounting Type Bulkhead
  • Operating Temperature Range -55 – 85
  • Circuit Application Power & Signal
  • Packaging Method Tray
1-225554-1 RF Connectors  1
  • RF Interface TNC
  • RF Connector Style Plug
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Port Configuration Single Port
  • Number of Positions 1
  • Number of Coaxial Contacts 1
  • Impedance 50
  • Cable Connector Orientation Right Angle
  • Body Material Brass
  • Body Plating Material Silver
  • Crimp Type Dual
  • RF Connector Center Contact Plating Material Gold
  • RF Connector Center Contact Material Brass
  • Termination Method to Wire & Cable Crimp
  • RF Connector Coupling Mechanism Snap-On
  • Connector Mounting Type Panel
  • RF Contact Captivation Method Mechanical
  • Detent Without
  • RF Connector Mated Outer Diameter (Approximate) 16.256
  • Cable Type RG 393
  • Operating Temperature Range -55 – 85
  • Operating Frequency 11
  • Packaging Method Carton
  • Dielectric Material PTFE
  • Grade Military
225532-3 RF Connectors
  • RF Interface SMA
  • RF Connector Style Plug
  • Connector & Contact Terminates To Wire & Cable
  • Connector Seal Type Interfacial Seal
  • Port Configuration Single Port
  • Number of Positions 1
  • Number of Coaxial Contacts 1
  • Impedance 50
  • Cable Connector Orientation Straight
  • Body Material Stainless Steel
  • Body Finish Passivated
  • Crimp Type Hex
  • Ferrule Plating Material Tin-Lead
  • RF Connector Center Contact Plating Material Gold
  • RF Connector Center Contact Material Brass
  • RF Connector Contact Configuration Not Captivated
  • Connector Product Type Connector Assembly
  • Ferrule Material Copper
  • Termination Method to Wire & Cable Crimp
  • RF Connector Coupling Mechanism Threaded
  • Connector Mounting Type Cable Mount (Free-Hanging)
  • RF Contact Captivation Method Mechanical
  • Mating Retention Type Safety Wire Holes
  • Product Length 26.17
  • RF Connector Mated Outer Diameter (Approximate) 8.99
  • Cable Type Belden 84142
  • Operating Temperature Range -65 – 165
  • Operating Frequency 18
  • Packaging Method Package
  • Dielectric Material PTFE
  • Military Category B
  • Coupling Nut Base Material Stainless Steel
  • Coupling Nut Plating Finish Passivated
  • Grade Military
5226990-3 RF Connectors
  • RF Interface BNC
  • RF Connector Style Jack
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single Port
  • Number of Positions 1
  • PCB Mount Orientation Right Angle
  • Number of Coaxial Contacts 1
  • Impedance 50
  • EMI & RFI Protection Type Isolated Ground
  • Body Material Polyester, PBT
  • Body Plating Material Polyester
  • Body Insulation Without
  • RF Connector Center Contact Plating Material Gold
  • RF Connector Center Contact Material Phosphor Bronze
  • Termination Method to Printed Circuit Board Through Hole
  • PCB Mount Retention Without
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Panel
  • RF Contact Captivation Method Mechanical
  • Detent With
  • Panel Attachment Style Rear Mount
  • Housing Color White
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Height Above PC Board 15.88
  • PCB Tail Length 4.11
  • Operating Temperature Range -55 – 85
  • Operating Frequency 4
  • Packaging Method Tube
  • Dielectric Material Polymethylpentene
  • Grade Commercial
  • Comment If an Insulating Bushing is required, see Part Number 330620.
RBD-50-M-01 RF Connectors
  • RF Interface BNC
  • RF Connector Style Plug
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Number of Positions 1
  • Impedance 50
  • Cable Connector Orientation Right Angle
  • Body Material Brass
  • Body Plating Material Nickel
  • Body Insulation Without
  • Body Shape Circular
  • RF Connector Center Contact Plating Material Gold
  • RF Connector Center Contact Material Brass
  • Termination Method to Wire & Cable Solder
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Dielectric Outside Diameter (Max) 3
  • Shield Outside Diameter (Min) 2.1 – 5
  • Conductor Outside Diameter 1.27
  • Cable Type RG 141
  • Packaging Method Package
  • Dielectric Material PTFE
  • Coupling Nut Base Material Brass
  • Grade Military
1054874-1 In-Series Adapters  1
  • RF Connector Type SMA
  • Connector System Cable-to-Cable
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Isolated Ground No
  • Number of Positions 1
  • Impedance 50
  • Frequency 18
  • Body Plating Material Gold
  • Body Style Straight
  • Body Insulation Without
  • Body Material Stainless Steel
  • RF Connector Center Contact Material Beryllium Copper
  • RF Connector Center Contact Plating Material Gold over Copper
  • Panel Mount Feature Type Bulkhead
  • Connector Mounting Type Bulkhead
  • Panel Attachment Style Rear Mount
  • Length 22.2
  • Operating Temperature Range -65 – 165
  • Circuit Application Power & Signal
  • Packaging Method Package
  • Dielectric Material TFE Fluorocarbon
  • Comment Hermetically Sealed
  • Lockwasher Material Stainless Steel
5227726-3 RF Connectors  1
  • RF Interface BNC
  • RF Connector Style Jack
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Port Configuration Single Port
  • Number of Positions 1
  • Number of Coaxial Contacts 1
  • Impedance 50
  • EMI & RFI Protection Type Isolated Ground
  • Cable Connector Orientation Straight
  • Body Material Zinc
  • Body Plating Material Nickel
  • Body Insulation Without
  • RF Connector Center Contact Plating Material Gold
  • RF Connector Center Contact Material Phosphor Bronze
  • Termination Method to Wire & Cable Solder
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Panel
  • RF Contact Captivation Method Mechanical
  • Detent With
  • Panel Attachment Style Front Mount
  • Housing Color White
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Operating Temperature Range -55 – 85
  • Operating Frequency 4
  • Packaging Method Carton
  • Dielectric Material VALOX
  • Flange and Thread Material VALOX
  • Grade Commercial
  • Flange and Thread Material Color Black
5221629-4 Coax Terminators  1
  • Cable Type Coaxial
  • Sealable No
  • Grade Commercial
  • Product Type Terminator
  • Number of Positions 1
  • Tether Without
  • Impedance 50
  • Resistor Specification 50 Ω
  • Body Plating Material Nickel
  • Body Style Straight
  • Body Insulation Without
  • RF Connector Center Contact Material Brass
  • RF Connector Center Contact Plating Material Gold
  • Operating Temperature Range -55 – 85
  • Circuit Application Signal
  • Packaging Method Loose Piece
  • Packaging Quantity 100
  • Dielectric Material Polyethylene
1057088-1 RF Connectors  1
  • RF Interface N Type
  • RF Connector Style Plug
  • Connector System Cable-to-Cable
  • Sealable Yes
  • Connector & Contact Terminates To Wire & Cable
  • Connector Seal Type Gasket
  • Port Configuration Single Port
  • Number of Positions 1
  • Number of Coaxial Contacts 1
  • Impedance 50
  • Cable Connector Orientation Straight
  • Body Material Stainless Steel
  • Body Finish Plated
  • Body Plating Material Gold
  • Crimp Type Hex
  • RF Connector Center Contact Plating Material Gold
  • RF Connector Center Contact Material Brass
  • RF Connector Contact Configuration Not Captivated
  • Termination Method to Wire & Cable Solder
  • RF Connector Coupling Mechanism Threaded
  • Detent Without
  • RF Connector Mated Outer Diameter (Approximate) 19.05
  • Cable Type RG 402 Semi-Rigid
  • Operating Temperature Range -65 – 105
  • Operating Frequency 27
  • Packaging Method Carton
  • Dielectric Material TFE Fluorocarbon
  • Collar Type Knurl
  • Coupling Nut Base Material Stainless Steel
  • Grade Commercial
227699-2 RF Connectors  1
  • RF Interface BNC
  • RF Connector Style Jack
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single Port
  • Number of Positions 1
  • PCB Mount Orientation Vertical
  • Number of Coaxial Contacts 1
  • Impedance 50
  • Body Material Zinc
  • Body Finish Plated
  • Body Plating Material Nickel
  • Body Insulation Without
  • Body Shape Circular
  • RF Connector Center Contact Plating Material Gold
  • RF Connector Center Contact Material Phosphor Bronze
  • Termination Method to Printed Circuit Board Through Hole
  • PCB Mount Retention Without
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Board Mount
  • RF Contact Captivation Method Mechanical
  • Detent With
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Height Above PC Board 15.88
  • PCB Tail Length 6.35
  • Operating Temperature Range -55 – 85
  • Operating Frequency 4
  • Packaging Method Tube
  • Dielectric Material VALOX
  • Grade Commercial
1-1337543-0 RF Connectors  1
  • RF Interface BNC
  • RF Connector Style Jack
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single Port
  • Number of Positions 1
  • PCB Mount Orientation Right Angle
  • Number of Coaxial Contacts 1
  • Impedance 50
  • EMI & RFI Protection Type Isolated Ground
  • Body Material Die Cast Zinc
  • Body Plating Material Nickel
  • Body Insulation With
  • RF Connector Center Contact Plating Material Gold
  • RF Connector Center Contact Material Brass
  • Termination Method to Printed Circuit Board Through Hole - Solder
  • Panel Mount Feature Type Hex Nut
  • PCB Mount Retention With
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Board Mount
  • RF Contact Captivation Method Mechanical
  • Detent With
  • Panel Attachment Style Rear Mount
  • Housing Color White
  • PCB Thickness (Recommended) 3.3
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Height Above PC Board 15.8
  • PCB Tail Length 4.9
  • Panel Cutout 12 x 12.9mm D-Shape
  • Mounting Post Length 3.8
  • Panel Thickness (Recommended) 1.5 – 5.5
  • Operating Temperature Range -55 – 85
  • Operating Frequency 4
  • Packaging Method Box
  • Dielectric Material PE-606
  • Flange and Thread Material PBT Polyester
  • Grade Commercial
  • Flange and Thread Material Color White