CAT-R131-C4967H Standard Circular Connectors 1
PRODUCT
  1. Connectors
  2. Standard Circular Connectors
  1. 4 HOLE FLANGE RECEPTACLE REAR PNL FEM. CAT-R131-C4967H
active
EN45545
  • Connector System Cable-to-Cable
  • Connector & Contact Terminates To Wire & Cable
  • Circular Connector Type Receptacle
  • Shell Type Metal
  • Prewired No
  • Product Type Connector
  • Accessory Color Black
  • Number of Positions 3
  • Contacts Preloaded No
  • Factory Installed Backshell Without
  • Shell Plating Material Black Chromate Over Zn Cobalt
  • Shell Base Material Aluminum Alloy
  • Circular Connector Insulation Material Type Low Fire Hazard Rubber
  • Reverse Gender Yes
  • Contact Layout Arrangement 14 – 6
  • Circular Connector Contact Type Socket
  • Panel Mount Feature Type Square Flange
  • Connector Mounting Type Panel Mount
  • Mating Alignment Type Keyed
  • Mating Retention With
  • Mating Retention Type Bayonet
  • Mating Alignment With
  • Circular Connector Shell Size 16
  • Operating Temperature Range -55 – 200
  • IP Water Sealing Level IP67
  • Circuit Application Power & Signal
  • Shielded Yes
  • Packaging Quantity 10
  • Position Locations Omitted All
  • Field Serviceable Yes
CAT-AM71-C83998C Circular Power Connectors 1
PRODUCT
  1. Connectors
  2. Circular Power Connectors
  1. CMC SERIES 1 CAT-AM71-C83998C
active
  • Connector Product Type Housing
  • Connector System Wire-to-Panel
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Connector & Housing Type Plug
  • Circular Connector Shell Type Metal-Shell
  • Number of Positions 5
  • Number of Power Positions 0
  • Number of Signal Positions 5
  • Reverse Numbering Without
  • Operating Voltage 600
  • Operating Voltage 600
  • Reverse Gender No
  • Contact Type Pin
  • Contact Current Rating (Max) 13
  • Contact Protection With
  • Termination Method to Wire & Cable Crimp & Solder
  • Screw & Hole Thread Size 1-3/16-18 UNEF-2A
  • Panel Mount Feature Type Flange with Mounting Holes
  • Connector Mounting Type Panel Mount
  • Mating Alignment With
  • Mating Retention With
  • Panel Mount Feature With
  • Mating Retention Type Threaded Coupling
  • Mating Alignment Type Keyed
  • Body Orientation Straight
  • Housing Color Black
  • Housing Material Thermoplastic
  • Circular Connector Shell Size 14
  • Housing Plating Material Nickel
  • Wire Size 30 – 14
  • Wire Size .05 – .2
  • Accepts Wire Insulation Diameter Range 3.81
  • Operating Temperature Range -55 – 105
  • Fluid Resistance Immersion
  • Circuit Application Power & Signal
  • Shielded No
  • UL Flammability Rating UL 94V-0
  • VDE Tested No
  • Packaging Method Box
  • Packaging Quantity 10
CAT-AM71-C83998J Circular Power Connectors 1
PRODUCT
  1. Connectors
  2. Circular Power Connectors
  1. CPC SERIES 1 CAT-AM71-C83998J
active
  • Connector Product Type Connector Assembly
  • Connector System Wire-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Connector & Housing Type Plug
  • Circular Connector Shell Type All Plastic
  • Number of Positions 4
  • Number of Power Positions 0
  • Number of Signal Positions 4
  • Operating Voltage 250
  • Operating Voltage 250
  • Reverse Gender No
  • Contact Type Pin
  • Contact Current Rating (Max) 13
  • Contact Protection With
  • Termination Method to Printed Circuit Board Through Hole - Solder
  • Screw & Hole Thread Size 1-3/8 - 18 UNEF-2A
  • Panel Mount Feature Type Flange
  • Connector Mounting Type Cable Mount (Free-Hanging)
  • Mating Alignment With
  • Mating Retention With
  • Panel Mount Feature With
  • Mating Retention Type Threaded Coupling
  • Mating Alignment Type Keyed
  • Panel Feedthrough Yes
  • Body Orientation Straight
  • Housing Color Black
  • Housing Material Glass Filled Nylon 6/6
  • Circular Connector Shell Size 11
  • Operating Temperature Range -55 – 105
  • Fluid Resistance None
  • Circuit Application Power & Signal
  • Shielded No
  • UL Flammability Rating UL 94V-0
  • Packaging Method Bag
  • Packaging Quantity 24
CAT-D48-ST273 Automotive Terminals 1
PRODUCT
  1. Terminals & Splices
  2. Automotive Terminals
  1. DEUTSCH SOLID CONTACTS CAT-D48-ST273
active
  • Sealable No
  • Primary Locking Feature On the Terminal
  • Crimp Type Indent
  • Typical Current Rating 7.5
  • Contact Fabrication Screw Machine
  • Contact Size Size 12
  • Terminal Type Pin
  • Mating Pin Diameter 1.02
  • Interface Plating Gold (Au)
  • Termination Method to Wire & Cable Crimp
  • Termination Method to Printed Circuit Board Through Hole - Solder
  • Product Terminates To Wire
  • Wire Size 4
  • Wire Size .5
  • Wire Size Search .5
  • Wire Size Search 4
  • PCB Hole Diameter .89 – .99
  • Insulation Option Uninsulated
  • Operating Temperature (Max) 80
  • Operating Temperature Range -55 – 125
  • Compatible With Wire Base Material Copper
  • Packaging Quantity 1
  • Packaging Method Package
  • Terminal Transmits 0 – 24 A (Low Power)
  • Customer Preferred Contact Yes
CAT-AM7-FRB69 Other Hard Wired Boxes 1
PRODUCT
  1. Connectors
  2. Other Hard Wired Boxes
  1. Sealed Fuse and Relay Boxes CAT-AM7-FRB69
active
  • Component Type Fuse Holder
  • Fuse Type Mini ATM Fuse
  • Compatible With Relay Type 280 Plug-In
  • Sealable Yes
  • Number of Fuses (Maximum) 2
  • Number of Relays (Maximum) 0
  • Number of Positions 4
  • Nominal Voltage Architecture 12
  • Secondary Locking No
  • Contact Current Rating (Max) 20
  • Centerline (Pitch) 7.8
  • Operating Temperature (Max) 125
  • Operating Temperature Range -40 – 125
  • IP Rating IP67
CAT-038-DCRSS222 Crimp D-Sub Connectors 1
PRODUCT
  1. Connectors
  2. Crimp D-Sub Connectors
  1. D-Sub Crimp Recpt Signal 26 Posn, Socket Size 22, Shell Size 2 CAT-038-DCRSS222
active
  • Shell Type Front Metal Shell
  • Connector & Housing Type Receptacle
  • Connector System Cable-to-Cable
  • D-Sub Shell Size 2
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Grade Standard
  • Product Type Connector
  • Grounding Indents Without
  • Number of Positions 26
  • Shell Material Steel
  • Insert Material Thermoplastic
  • Shell Plating Material Tin
  • Shield Plating Material Tin
  • Shield Material Steel
  • D-Sub Contact Size 22
  • Mating Retention With
  • Mating Retention Type Clinch Nut, 4-40 UNC
  • Connector Mounting Type Panel Mount
  • Jackscrew Material Zinc Alloy
  • Centerline (Pitch) 1.98
  • Housing Color Black
  • Housing Material Nylon GF
  • Cable Insulation Diameter Range 4.19
  • Operating Temperature Range -55 – 105
  • Shielded Yes
  • Circuit Application Signal
  • UL Flammability Rating UL 94V-0
  • Insert Flammability Rating UL 94V-0
  • Packaging Method Package
  • Packaging Quantity 1
  • Comment Components shipped unassembled, each part bulk-packaged.
CAT-026-RAVSAP5277 PCB D-Sub Connectors 1
PRODUCT
  1. Connectors
  2. PCB D-Sub Connectors
  1. D-Sub Receptacle assy: Vertical, Action Pin, Shell Size 5, 2.77mm CAT-026-RAVSAP5277
active
  • Shell Type Front Metal Shell
  • Connector & Housing Type Receptacle
  • Connector System Board-to-Board
  • D-Sub Shell Size 5
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Grounding Indents Without
  • Product Type Connector
  • Grounding Straps Without
  • Number of Positions 50
  • Number of Rows 2
  • PCB Mount Orientation Vertical
  • Preloaded Yes
  • Connector Profile Medium
  • Female Screwlock Material Zinc
  • Shell Material Carbon Steel
  • Plastic No
  • Shell Plating Material Tin
  • Contact Base Material Copper Alloy
  • PCB Contact Termination Area Plating Material Tin
  • Contact Underplating Material Nickel
  • Contact Mating Area Plating Material Gold
  • Termination Method to Printed Circuit Board Through Hole - Press-Fit
  • Grounding Clips Without
  • Termination Post Length 5.8
  • Panel Mount Feature Without
  • PCB Mount Retention With
  • PCB Mount Retention Type Action/Compliant Tail
  • Mating Retention With
  • Mating Retention Type Female Screwlocks, 4-40 UNC
  • Connector Mounting Type Board Mount
  • Mounting Hole Diameter 3.05
  • Centerline (Pitch) 2.77
  • Housing Color Black
  • Housing Material Thermoplastic
  • Row-to-Row Spacing 2.84
  • PCB Thickness (Recommended) 2.36
  • Operating Temperature Range -55 – 105
  • Circuit Application Signal
  • Approved Standards UL E81956
  • UL Flammability Rating UL 94V-0
  • Packaging Quantity 7
  • Packaging Method Tube
CAT-Z8-P6507 SFP, SFP+ & zSFP+ 1
PRODUCT
  1. Connectors
  2. SFP, SFP+ & zSFP+
  1. zSFP+ Stacked Cage Assembly: Gasket CAT-Z8-P6507
active
  • Cage Type Stacked
  • Pluggable I/O Product Type Cage Assembly with Integrated Connector
  • Integrated Lightpipes No
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Form Factor zSFP+ Stacked (SFP28)
  • Port Matrix Configuration 2 x 1
  • Lightpipe Configuration Dual Triangular (Inner)
  • Lightpipe Style Standard
  • Lightpipe Profile Standard
  • Number of Ports 2
  • Number of Positions 40
  • Data Rate (Max) 32
  • Contact Current Rating (Max) .5
  • Tail Plating Material Tin
  • Contact Mating Area Plating Material Gold or Gold Flash over Palladium Nickel
  • Contact Mating Area Plating Thickness .76
  • Termination Method to Printed Circuit Board Through Hole - Press-Fit
  • PCB Mounting Style Through Hole - Press-Fit
  • Connector Mounting Type Board Mount
  • Centerline (Pitch) .8
  • Cage Material Nickel Silver Alloy
  • Tail Length 1.8
  • PCB Thickness (Recommended) 1.5
  • Operating Temperature Range -55 – 105
  • Pluggable I/O Applications SFP+ Thermally Enhanced
  • Circuit Application Signal
  • For Use With Pluggable I/O Products zSFP+ SMT Connector
  • Heat Sink Compatible No
  • UL Flammability Rating UL 94V-0
  • Packaging Method Tray
  • EMI Containment Feature Type Elastomeric Gasket
  • Included Lightpipe No
CAT-AM71-C83998BB Circular Power Connectors 1
PRODUCT
  1. Connectors
  2. Circular Power Connectors
  1. CPC SERIES 3 CAT-AM71-C83998BB
active
  • Connector Product Type Housing
  • Connector System Wire-to-Panel
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Connector & Housing Type Plug
  • Circular Connector Shell Type All Plastic
  • Number of Positions 3
  • Number of Power Positions 3
  • Number of Signal Positions 0
  • Reverse Numbering Without
  • Operating Voltage 600
  • Operating Voltage 600
  • Reverse Gender No
  • Contact Type Pin
  • Contact Current Rating (Max) 32
  • Contact Protection With
  • Termination Method to Wire & Cable Crimp
  • Screw & Hole Thread Size 1-3/8 - 18 UNEF-2A
  • Panel Mount Feature Type Flange
  • Connector Mounting Type Cable Mount (Free-Hanging)
  • Mating Alignment With
  • Mating Retention With
  • Panel Mount Feature With
  • Mating Retention Type Threaded Coupling
  • Mating Alignment Type Keyed
  • Body Orientation Straight
  • Housing Color Black
  • Housing Material PA 6.6 GF
  • Circular Connector Shell Size 17
  • Accepts Wire Insulation Diameter Range 5.59
  • Operating Temperature Range -55 – 105
  • Fluid Resistance None
  • Circuit Application Power
  • Shielded No
  • UL Flammability Rating UL 94V-0
  • VDE Tested No
  • Packaging Method Standard
  • Packaging Quantity 1
CAT-AM71-C83998M Circular Power Connectors 1
PRODUCT
  1. Connectors
  2. Circular Power Connectors
  1. CPC SERIES 2 CAT-AM71-C83998M
active
  • Connector Product Type Connector Assembly
  • Connector System Wire-to-Panel
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Connector & Housing Type Plug
  • Circular Connector Shell Type All Plastic
  • Number of Positions 8
  • Number of Power Positions 0
  • Number of Signal Positions 8
  • Reverse Numbering Without
  • Operating Voltage 250
  • Operating Voltage 250
  • Reverse Gender No
  • Contact Type Pin
  • Contact Current Rating (Max) 7.5
  • Contact Protection With
  • Screw & Hole Thread Size 1-3/8 - 18 UNEF-2A
  • Panel Mount Feature Type Flange
  • Connector Mounting Type Cable Mount (Free-Hanging)
  • Mating Alignment With
  • Mating Retention With
  • Panel Mount Feature With
  • Mating Retention Type Threaded Coupling
  • Mating Alignment Type Keyed
  • Body Orientation Straight
  • Housing Color Black
  • Housing Material Polyester
  • Circular Connector Shell Size 11
  • Assembly Length 26.42
  • Accepts Wire Insulation Diameter Range 1.73
  • Operating Temperature Range -55 – 105
  • Fluid Resistance None
  • Circuit Application Signal
  • Shielded No
  • UL Flammability Rating UL 94V-0
  • VDE Tested No
  • Packaging Method Bag
  • Packaging Quantity 100
CAT-246-DPARS5274 PCB D-Sub Connectors 1
PRODUCT
  1. Connectors
  2. PCB D-Sub Connectors
  1. D-Sub Plug Assembly: Right Angle, Shell Size 5, 2.74mm CAT-246-DPARS5274
active
  • Shell Type Front Metal Shell
  • Connector & Housing Type Plug
  • Connector System Board-to-Board
  • D-Sub Shell Size 5
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Grounded Yes
  • Grounding Indents With
  • Product Type Connector
  • Footprint 13.84
  • Shielded No
  • Grounding Straps Without
  • Number of Positions 50
  • Number of Rows 3
  • PCB Mount Orientation Right Angle
  • Preloaded Yes
  • Connector Profile High
  • Post Size .64
  • Insert Material Thermoplastic
  • Shell Material Carbon Steel
  • Plastic No
  • Shell Plating Material Tin
  • Contact Base Material Brass
  • PCB Contact Termination Area Plating Material Tin
  • Contact Underplating Material Nickel
  • Contact Mating Area Plating Material Gold
  • Contact Shape & Form Square
  • Contact Current Rating (Max) 6
  • Termination Method to Printed Circuit Board Through Hole - Solder
  • Grounding Clips Without
  • Termination Post Length 3.18
  • Panel Mount Feature Without
  • PCB Mount Alignment With
  • PCB Mount Retention With
  • PCB Mount Retention Type Mounting Hole
  • Mating Retention With
  • Mating Retention Type Female Screwlocks, 4-40 UNC
  • Connector Mounting Type Board Mount
  • Mounting Hole Diameter 3.05
  • Centerline (Pitch) 2.74
  • Housing Color Black
  • Housing Material Nylon GF
  • Row-to-Row Spacing 2.84
  • PCB Thickness (Recommended) 2.36
  • Operating Temperature Range -55 – 105
  • Circuit Application Signal
  • Approved Standards UL E28476
  • UL Flammability Rating UL 94V-0
  • Insert Flammability Rating UL 94V-0
  • Packaging Quantity 7
  • Packaging Method Tube
  • Comment Plugs are preloaded with size 20 DF posted pin contacts
CAT-M1-ST814 Standard Circular Connectors 1
PRODUCT
  1. Connectors
  2. Standard Circular Connectors
  1. M12 STRAIGHT CRIMPED STRAIN RELIEF CAT-M1-ST814
active
EN45545 IEC 50155 IEC 61076-2-101 IEC 61373 IP67
  • Connector System Cable-to-Cable
  • Sealable Yes
  • Connector & Contact Terminates To Wire & Cable
  • Circular Connector Type Plug
  • Shell Type Full Metal Shell
  • Product Type Connector Kit
  • Number of Positions 4
  • Number of Signal Positions 8
  • Contacts Preloaded No
  • Operating Voltage 250
  • Data Rate 1
  • Shell Plating Material Nickel
  • Shell Base Material Brass
  • Circular Connector Insulation Material Type Low Fire Hazard Thermoplastic
  • Hermetically Sealed Yes
  • Weight 25
  • Environmental Protection Type Elastomer Sealed
  • Environmental Protection Yes
  • Contact Current Rating (Max) .5
  • Circular Connector Contact Type Pin
  • Connector Mounting Type Cable Mount (Free-Hanging)
  • Polarization Code A
  • Mating Alignment Type Keyed
  • Mating Retention With
  • Wire Size 20
  • Accepts Wire Insulation Diameter Range 8.3
  • Operating Temperature Range -45 – 85
  • IP Dust Sealing Level 6
  • IP Water Sealing Level 7
  • Circuit Application Signal
  • Shielded Yes
  • Durability Rating 250
  • UL Flammability Rating UL 94V-0
  • Packaging Quantity 1
  • Field Serviceable Yes
CAT-C73765-M1E Standard Circular Connectors 1
PRODUCT
  1. Connectors
  2. Standard Circular Connectors
  1. M12 Field Installable Unshielded CAT-C73765-M1E
active
  • Connector System Wire-to-Wire
  • Sealable Yes
  • Connector & Contact Terminates To Wire & Cable
  • Circular Connector Type Plug
  • Shell Type Plastic
  • Prewired No
  • Product Type Connector
  • Accessory Color Black
  • Assembly Type Electrical Connector
  • Number of Positions 2
  • Number of Power Positions 0
  • Number of Signal Positions 2
  • Contacts Preloaded Yes
  • Factory Installed Backshell No
  • Keying A
  • Operating Voltage 30
  • Operating Voltage 30
  • Shell Base Material PBT
  • Circular Connector Insulation Material Type Polyamide 66 GF25
  • O-Ring Material Silicone
  • Peripheral Seal Material Silicone
  • Environmental Protection Type Elastomer Sealed
  • Environmental Protection IP67
  • Contact Current Rating (Max) 2
  • Reverse Gender No
  • Circular Connector Contact Type Pin
  • Polarization Code A
  • Mating Alignment Type Keyed
  • Mating Retention Type Threaded Coupling
  • Mating Alignment With
  • Circular Connector Shell Size 20
  • Wire Size 18 – 24
  • Wire Size .05 – .14
  • Operating Temperature Range -40 – 85
  • IP Dust Sealing Level 6
  • IP Water Sealing Level IP67
  • Circuit Application Signal
  • Shielded No
  • Durability Rating 100
  • UL Flammability Rating UL 94HB
  • Packaging Quantity 1
  • Field Serviceable Yes
CAT-472-Z12553 Hard Metric Backplane Connectors 1
PRODUCT
  1. Connectors
  2. Hard Metric Backplane Connectors
  1. HM Receptacle Connector: Traditional Backplane, Coplanar, 2mm CAT-472-Z12553
active
  • Ground Component Type Ground Return Shielding
  • PCB Connector Assembly Type PCB Mount Receptacle
  • Connector System Board-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Backplane Interface Type 2mm HM
  • Number of Signal Positions 55
  • Rows Loaded A
  • Mating & Unmating Configuration Make First / Break Last
  • Number of Columns 11
  • Number of Rows 5
  • Backplane Architecture Mezzanine
  • Number of Positions 55
  • PCB Mount Orientation Right Angle
  • Data Rate ≤1
  • Crosstalk Version Standard
  • Contact Base Material Copper Alloy
  • PCB Contact Termination Area Plating Material Tin
  • Contact Underplating Material Nickel
  • Contact Type Socket
  • CompactPCI Designation J1/J4
  • Contact Mating Area Plating Material Gold
  • Contact Mating Area Plating Material Thickness .38
  • Contact Current Rating (Max) 1.5
  • Feedthrough Post Length 3.3
  • Contact Mating Area Length 3.3
  • Termination Method to Printed Circuit Board Through Hole - Press-Fit
  • Mating Alignment Type Guide Lugs
  • Connector Mounting Type Board Mount
  • Housing Material Glass Filled Polyester
  • Centerline (Pitch) 2
  • Housing Color Gray
  • Backplane Module Length 38
  • Operating Temperature Range -55 – 125
  • Shielded No
  • Circuit Application Power & Signal
  • UL Flammability Rating UL 94V-0
  • AdvancedTCA Specified Product No
  • Packaging Quantity 10
  • Packaging Method Box
  • Comment Female connector with pre-installed shield.
CAT-D9934-A83B PCB Headers & Receptacles 1
PRODUCT
  1. Connectors
  2. PCB Headers & Receptacles
  1. DYNAMIC 5000 HDR ASSY CAT-D9934-A83B
active
  • Connector System Wire-to-Board
  • Header Type Fully Shrouded
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • PCB Connector Assembly Type PCB Mount Header
  • Number of Positions 2
  • Number of Rows 1
  • PCB Mount Orientation Horizontal
  • Primary Product Color Black
  • Contact Mating Area Plating Material Thickness .38
  • Contact Mating Area Plating Material Gold
  • Contact Type Pin
  • Contact Current Rating (Max) 30
  • Termination Method to Printed Circuit Board Through Hole - Solder
  • PCB Mount Retention Type Retention Leg
  • Mating Retention With
  • Mating Alignment Type Keyed
  • Connector Mounting Type Board Mount
  • Mating Alignment With
  • PCB Mount Alignment Without
  • PCB Mount Retention With
  • Housing Material PBT
  • Centerline (Pitch) 10.16
  • Operating Temperature Range -55 – 105
  • Circuit Application Power
  • UL Flammability Rating UL 94V-0
  • Packaging Type Box
CAT-AM74-UN384H Ribbon Cable Connectors 1
PRODUCT
  1. Connectors
  2. Ribbon Cable Connectors
  1. AMP-LATCH UNIVERSAL HEADERS CAT-AM74-UN384H
active
  • Connector Product Type Connector Assembly
  • Connector System Board-to-Board
  • Connector & Housing Type Plug
  • Connector & Contact Terminates To Printed Circuit Board
  • Ribbon Cable Connector Header Type Universal Ejection Pin Headers
  • Connector Mating Latch & Lock Type Long
  • Connector Type Header
  • Number of Positions 10
  • PCB Mount Orientation Right Angle
  • Number of Rows 2
  • Operating Voltage 250
  • Insulation Resistance 5000
  • Connector Profile Standard
  • Contact Base Material Brass
  • PCB Contact Termination Area Plating Material Tin
  • Contact Underplating Material Nickel
  • Contact Shape & Form Dual Beam
  • PCB Contact Termination Area Plating Material Finish Bright
  • Contact Mating Area Plating Material Gold
  • Contact Mating Area Plating Material Thickness .2
  • Contact Type Pin
  • PCB Contact Termination Area Plating Material Thickness 1 – 2.54
  • Mating Square Post Dimension .64
  • Contact Current Rating (Max) 1
  • Termination Post & Tail Length 2.79
  • Termination Method to Printed Circuit Board Through Hole - Press-Fit
  • Round Termination Post & Tail Diameter .64
  • Panel Mount Feature Type Mounting Ears
  • Panel Mount Feature Without
  • PCB Mount Alignment With
  • Contact Retention Type Within Housing Clearance-Fit
  • Mating Alignment With
  • PCB Mount Retention With
  • PCB Mount Retention Type Action/Compliant Tail
  • Mating Alignment Type Center
  • Mating Retention With
  • Mating Retention Type Ejection Latch
  • Connector Mounting Type Board Mount
  • Housing Color Black
  • Housing Material Glass Filled Nylon/Polyester
  • Mating Entry Location Top
  • Centerline (Pitch) 2.54
  • PCB Thickness (Recommended) 1.57
  • Connector Height 8.53
  • Row-to-Row Spacing 2.54
  • Connector Length 70.1
  • Shrouded End Dimension 3.81
  • Operating Temperature Range -65 – 105
  • Housing Temperature Rating Standard
  • Solder Process Feature Board Standoff
  • Circuit Application Signal
  • UL Flammability Rating UL 94V-0
  • Packaging Method Box
  • Packaging Quantity 1
  • Comment Mates with Receptacles
CAT-AM7-253 IDC D-Sub Connectors 1
PRODUCT
  1. Connectors
  2. IDC D-Sub Connectors
  1. IDC D-Sub: Receptacle Assembly, Low Profile, Signal, 2.77 mm CAT-AM7-253
active
  • Shell Type All Plastic
  • Connector & Housing Type Receptacle
  • Connector System Cable-to-Cable
  • Connector Product Type Connector Assembly
  • D-Sub Shell Size 1
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Grounding Indents Without
  • Profile Low
  • Thread Type Standard
  • Grade Standard
  • Number of Positions 9
  • Number of Rows 2
  • Compatible With Wire & Cable Type Ribbon Cable
  • Shell Plating Finish Bright
  • Strain Relief Part Number 746785-1
  • Shell Material Steel
  • Ribbon Cable Centerline Spacing 1.27
  • Shell Plating Material Tin
  • Cover Material Thermoplastic
  • Cable Exit Angle 90°
  • Color Black
  • Contact Base Material Phosphor Bronze
  • PCB Contact Termination Area Plating Material Tin
  • Contact Underplating Material Nickel
  • Contact Mating Area Plating Material Gold
  • D-Sub Contact Size 20
  • Contact Current Rating (Max) 1.25
  • Contact Mating Area Plating Thickness .76
  • Contact Type Socket
  • Termination Method to Wire & Cable Insulation Displacement (IDC)
  • Screw & Hole Thread Size 4-40 UNC 2B
  • PCB Mount Retention Type None
  • Connector Mounting Type Cable Mount (Free-Hanging)
  • Threaded Insert Material Steel
  • Threaded Insert Plating Material Zinc
  • Mating Connector Lock With
  • Mating Connector Lock Type Threaded Insert, 4-40 UNC
  • Mounting Angle Straight
  • Enclosure Without
  • Centerline (Pitch) 1.38
  • Housing Material Thermoplastic
  • Cable Insulation Diameter Range .81 – .97
  • Solid Wire Size 28 – 26
  • Solid Wire Size .1 – .13
  • Wire Size 28 – 26
  • Wire Size .08 – .15
  • Operating Temperature Range -55 – 105
  • Shielded Yes
  • Circuit Application Signal
  • UL Flammability Rating UL 94V-0
  • Packaging Quantity 32
  • Packaging Method Tray
  • Optional Cable Stabilizer 746785-1
  • Comment All plug assemblies are supplied with housing and cover preassembled
CAT-472-Z12 Hard Metric Backplane Connectors 1
PRODUCT
  1. Connectors
  2. Hard Metric Backplane Connectors
  1. Hard Metric Male Connector: Traditional Backplane, Mezzanine, 2mm CAT-472-Z12
active
  • Ground Component Type Ground Return Shielding
  • PCB Connector Assembly Type PCB Mount Header
  • Connector System Board-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Backplane Interface Type 2mm HM
  • Number of Signal Positions 40
  • Rows Loaded A
  • Mating & Unmating Configuration Make First / Break Last
  • Number of Columns 5
  • Number of Rows 4
  • Backplane Architecture Mezzanine
  • Number of Positions 20
  • PCB Mount Orientation Vertical
  • Data Rate 1
  • Crosstalk Version Standard
  • Contact Base Material Copper Alloy
  • PCB Contact Termination Area Plating Material Tin
  • Contact Underplating Material Nickel
  • Contact Type Pin
  • CompactPCI Designation None
  • Contact Mating Area Plating Material Gold
  • Contact Mating Area Plating Material Thickness .05
  • Contact Current Rating (Max) .7
  • Feedthrough Post Length (Rows A-E) 14.5
  • Feedthrough Post Length (Rows F & Z) 16
  • Termination Method to Printed Circuit Board Through Hole - Press-Fit
  • Mating Alignment Type Guide Hole
  • Connector Mounting Type Board Mount
  • Front Mating Level Level 1
  • Housing Material Glass Filled Polyester
  • Centerline (Pitch) 1.5
  • Housing Color Black
  • Backplane Module Length 44
  • Operating Temperature Range -65 – 105
  • Shielded No
  • Circuit Application Power & Signal
  • UL Flammability Rating UL 94V-0
  • AdvancedTCA Specified Product No
  • Packaging Quantity 1
  • Packaging Method Box
  • Comment Row Configuration 5+2
CAT-035-DCRSS204 Crimp D-Sub Connectors 1
PRODUCT
  1. Connectors
  2. Crimp D-Sub Connectors
  1. D-Sub Crimp Recpt Signal 37 Posn, Socket Size 20, Shell Size 4 CAT-035-DCRSS204
active
  • Shell Type Full Metal Shell
  • Connector & Housing Type Receptacle
  • Connector System Cable-to-Cable
  • D-Sub Shell Size 4
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Grade Standard
  • Product Type Connector
  • Grounding Indents Without
  • Number of Positions 37
  • Shell Material Steel
  • Insert Material Thermoplastic
  • Shell Plating Material Tin
  • Shield Plating Material Tin
  • Shield Material Steel
  • D-Sub Contact Size 20
  • Mating Retention With
  • Mating Retention Type Clinch Nut, 4-40 UNC
  • Jackscrew Material Zinc Alloy
  • Centerline (Pitch) 2.74
  • Housing Color Black
  • Housing Material Nylon GF
  • Cable Insulation Diameter Range 4.19 – 11.56
  • Operating Temperature Range -55 – 105
  • Shielded Yes
  • Circuit Application Signal
  • UL Flammability Rating UL 94V-0
  • Insert Flammability Rating UL 94V-0
  • Packaging Method Bulk Kit
  • Packaging Quantity 1
  • Comment Maximum cable diameter after jacket and braid removed.
CAT-AM71-C83998F Circular Power Connectors 1
PRODUCT
  1. Connectors
  2. Circular Power Connectors
  1. CPC SERIES 1 POSTED CAT-AM71-C83998F
active
  • Connector Product Type Connector Assembly
  • Connector System Wire-to-Board
  • Sealable No
  • Connector & Housing Type Receptacle
  • Circular Connector Shell Type All Plastic
  • Number of Positions 4
  • Number of Power Positions 0
  • Number of Signal Positions 4
  • Operating Voltage 250
  • Operating Voltage 250
  • Reverse Gender No
  • Contact Type Pin
  • Termination Method to Printed Circuit Board Through Hole - Solder
  • Panel Mount Feature Type Flange with Mounting Holes
  • Connector Mounting Type Panel Mount
  • Mating Alignment With
  • Mating Retention With
  • Panel Mount Feature With
  • Mating Retention Type Threaded Coupling
  • Mating Alignment Type Keyed
  • Housing Color Black
  • Housing Material PA 6.6
  • Circular Connector Shell Size 11
  • Assembly Length 30.71
  • Operating Temperature Range -55 – 105
  • Fluid Resistance Immersion
  • Circuit Application Signal
  • Shielded No
  • UL Flammability Rating UL 94V-0
  • Packaging Method Tray
  • Packaging Quantity 8