Solutions for Construction Applications

A surface mount resistor is a tiny rectangular ceramic body with silver conductive edges on either end. They provide the same functionality as the more traditional axially leaded resistors but has a lower power dissipation capacity and oftentimes a lower stray inductance and capacity.

DT connectors offer field proven reliability and rugged quality. The DT design strengths include optional flange mounting, multi-pin arrangements, lower cost, and design flexibility.

The M9100 pressure transducer measures fluid pressures up to 700 bar in extreme conditions in hydraulic applications. The rugged design and reliable performance of the M9100 addresses the pressure sensing needs of heavy-duty applications.

A through-hole resistor is a fixed resistor that has long, pliable leads that can be stuck into a breadboard or hand- or wave-soldered into a printed circuit board. A through-hole resistor is used to reduce the flow of electrical current within a circuit. It’s commonly composed of carbon film, metal film, metal oxide film, thick film, or wirewound.

The AMPSEAL 16 connectors were designed to meet the rigorous demands of off-road, heavy-duty industrial, recreational and agricultural applications.

A chassis mount resistor is designed to promote heat loss and cooling. This resistor is manufactured using wirewound resistor technology and features a ceramic core that is molded into an extruded aluminum chassis mount housing.

Our AMPSEAL connectors provides rugged reliability, easy use and advanced environmental sealing in heavy-duty applications. They are available in cable plugs and PCB mount headers that are designed to stand up to high-temperature applications.

A trimmer resistor is a type of variable resistor or adjustable potentiometer that can adjust, tune, and calibrate circuits. It is meant to never be seen or adjusted by the device’s user.

HDP20 connectors are heavy duty rated, environmentally sealed, composite shell, multi-pin connectors. The composite thermoplastic shell is designed for applications where chemicals can damage a connector housing.

A potentiometer is a manually adjustable variable resistor that allows you to change and regulate the current flowing through a resistor.

The environmentally sealed, rectangular DRC connectors offer insert arrangements of 24, 40, 50, 60, 64, 70, 76, and 80 cavities and accept size 12, 16, and 20 contacts. Several mounting options are available including in-line, flange mount, and PCB mount.

DTHD connectors are single terminal connectors for heavy duty applications. Easy to install, environmentally sealed and compact in size, they are a simple, field serviceable alternative to a splice. DTHD connectors are available in three sizes, carry 25 to 100 amps, and can be mounted or used in-line.

DTM connectors are the answer to all of your smaller wire gauge applications. The DTM offers the designer the ability to use multiple size 20 contacts, each with 7.5 amp continuous capacity, within a single shell.

DTP connectors are the solution for your power application requirements. Building on both the DT and DTM design strengths, the DTP connector line was developed to fill the need for higher amperage, multi-pin, inexpensive connectors.

The HD10 is an environmentally sealed, thermoplastic cylindrical connector series and offers arrangements from 3 to 9 cavities. HD10 connectors are available either in-line or flanged and accept size 12 or 16 contacts, or a combination of size 16 and size 4 contacts.

The STRIKE connector series features a lever lock system and is designed for heavy duty equipment applications. The environmentally sealed series offers two different size rugged housings that accept contacts from size 20 to 16 with arrangements of 32 and 64 cavities.

TE’s compact circuit board enclosures accept snap-in headers. The enclosure features a through hole mounting flange on each side, as well as optional venting. Designed with space to accommodate one or more DT or DTM connector interfaces, the headers feature 90° pins.

The HDB is designed to provide an emergency disconnect between machinery and implements that require power connections. The HDB plug is designed to break the connection before damaging the wiring system.

The Heavy Duty Sealed Connector Series is designed for high vibration and extreme temperature and with inflammable materials in motor vehicle applications.

The LEAVYSEAL connectors have been developed to meet the tough requirements of the truck industry. This fully sealed series combines the advantages of proven AMP MCP terminals with a robust design and easy mating of multi-position connectors.

A pushbutton switch is a non-latching or momentary switch that causes a temporary change of current in an electrical circuit when the button is pressed. A spring returns the switch to its original position immediately afterwards.

A toggle switch is a type of electrical switch that is actuated by moving a lever back and forth to open or close an electrical circuit.

A rocker switch is an electrical switch that rocks back and forth. It is actuated by a paddle, standard rocker, or dual rocker.