Lightfair 2023

we'll be excited to connect and explore how we can partner to build the future of efficient and smarter lighting.

Our LUMAWISE Endurance N NEMA dimming receptacles provide an electrical and mechanical interconnection between an ANSI C136 based network lighting control and luminaire. LUMAWISE Endurance N+ network lighting control accessories include an ANSI C136 compliant base assembly with an integral seal gasket. These new covers include a variety of two sizes, 58.6mm and 117.0mm in light gray, smoke gray, and clear. The base assembly with cover provides an IP66 rated control enclosure that protects from outdoor harsh environments, including rain, snow, and salt spray. The covers complete the enclosure.

The Endurance S Zhaga Book 18 connector system enables D4i controlled Zhaga Book 18 compliant luminaires while the Endurance S keyed connector system enables non-Book 18 applications like Z10. Extending from the Endurance S portfolio is the S2 receptacle. Offered in both Zhaga Book 18 and Z10 enabled keyed varieties the S2 receptacle introduces a two-wire per contact solution for daisy-chain wiring and applied cost savings in luminaires with dual node architecture.

Our LUMAWISE ALR series street lighting photocells are ANSI C136.10 compliant photo controls offering an economical and reliable means of controlling lighting systems from dusk to dawn. These products are engineered specifically to enhance lighting system performance and enable energy savings. They feature state-of-the art electronic circuitry that utilizes a non-drifting phototransistor light sensor to uniform and consistent turn-on/off levels.

TE Connectivity (TE)’s LUMAWISE Motion Sensor is designed for street lighting. Enabling energy savings from dimming or even turning off a luminaire, while still being able to react to motion and bring a luminaire to full brightness for safety and security reasons. LUMAWISE Motion sensor will fit into the Zhaga-D4i ecosystem, which is the new standard for smart cities. Working as a standalone control device or in combination with Zhaga-D4i photocell or communication node for greater levels of controls. The sensor is a pluggable device, with the standard Zhaga book 18 interface for an easy upgrade.

TE’s LUMAWISE Power Input Terminal Block (TB) offers a unique, highly engineered wire termination alternative to traditional terminal blocks utilized in LED outdoor lighting luminaires and HID (High Intensity Discharge) luminaires that include HPS (High Pressure Sodium) and MHL (Metal Halide Lamps) that are rapidly transitioning to LED luminaires. TE’s innovative design replaces power entry aluminum lug screw connections with rising vice clamp screw connections and quick connect tabs and receptacle wire connections with lever actuated spring cage clamp poke-in wire connections.

LUMAWISE Motion sensor will fit into the Zhaga-D4i ecosystem, which is the new standard for smart cities. Working as a standalone control device or in combination with Zhaga-D4i photocell or communication node for greater levels of controls. The sensor is a pluggable device, with the standard Zhaga book 18 interface for an easy upgrade.

TE Connectivity's portfolio of Low Power WAN (LPWAN) and Industrial, Scientific and Medical (ISM) antennas provides high performance connectivity for licensed and non-licensed low power and long range services- e.g. LoRa, UHF, Sigfox NB-IoT and Cat-M. Emerging cellular technologies including NB-IoT and Cat-M offer alternative LPWAN options.

These products are engineered specifically to enhance lighting system performance and enable energy savings. They feature state-of-the art electronic circuitry that utilizes a non-drifting phototransistor light sensor to uniform and consistent turn-on/off levels.

TE Connectivity supports Single Pair Ethernet (SPE) as the infrastructure for IIoT. In today's world, we have many trends which provide opportunities for our customers - miniaturization of devices, increased efficiency of devices, and remote power feeding. SPE provides a single open, scalable Ethernet-based network within an automation system.

TE Connectivity (TE)’s NECTOR T Pluggable connectors provide an easy-to-use, pluggable power-distribution connector-cabling system, suited for moist and wet environments (sealed IP68). NECTOR T pluggable connectors offer a complete solution including 3-way and 4-way splittersand panel mount connectors, so power-splitting is fast and easy.

NECTOR S connectors are engineered to reduce installation time in nearly any indoor lighting installation through a round, small form design.

Our SlimSeal Miniature series connector is a dust and waterproof, IP67-rated connector available in two and three position configurations. A robust press-to-release spring latch helps secure connector mating. Different colors enable easy identification and flexibility in design.

CORCOM FB series power line filters are specially designed for fluorescent and LED light fixtures that utilize ballasts or drivers in up to 277VAC applications.

CoolSplice Connectors are IPx8 rated in-line splices suitable for outdoor applications. Wire termination is done independently by inserting a wire into the end of the connector and pushing down the color coded button with a standard pair of pliers.

Our LUMAWISE LED holders remove the need to solder allowing the LED to be directly attached to a heatsink using a 2* M3 screws at a standardized screw-pitch. In addition, they always have an optics landing zone at the same distance from the secondary optics.

Come visit or connect with us to learn more about the new ERNI IDC Terminal products. In the meantime, check out the listing of TE's ERNI products!

TE's BUCHANAN WireMate connectors are easy-to-install poke-in wire-to-board connectors that accommodate multiple design requirements. (In the photo: Poke-In series (modular) appear at top; Slim Poke-In series (releasable) appear at bottom).

Low profile Micro MATE-N-LOK connector excels in tight spaces and includes right-angle surface-mount headers and mating cable connectors.

Our Hermaphroditic blade and receptacle connectors are Surface Mount (SMT) wire-to-board and board-to-board connectors that drive power between adjacent linear LED lighting strip modules.

Our Alcoswitch products are designed to withstand extreme shock, vibration, temperature and altitude. These switches can be used anywhere — in production lines, robotics, lifts, control panels, cash machines, motion control systems, lighting, building systems, solar, HVAC, and an array of safety-critical applications for example. Our switches and knobs are cost-effective, reliable and enhance productivity.

The new sealed CPC using UL F1-rated resin is excellent for UV resistance in outdoor applications. The UL F1 rating meets industry standards for long-term UV exposure, making the housings suitable for outside applications where parts are subject to frequent or extended periods of exposure to sun light.

NECTOR T pluggable connectors offer a complete solution including 3-way and 4-way splittersand panel mount connectors, so power-splitting is fast and easy.

CORCOM FB series power line filters are specially designed for fluorescent and LED light fixtures that utilize ballasts or drivers in up to 277VAC applications.

Our cable gland portfolio offers high ingress protection with IP66 and IP68 rating, multiple mounting options with various thrad specs and time-saving options, as well as specialized glands and accessories.