LightFair 2022

Unable to make it to Lightfair this year? Not to worry, we're still excited to connect with you virtually to explore how we can partner to build the productive lighting solutions of the future.

TE Connectivity (TE)’s LUMAWISE Power Input Terminal Block (TB) offers a unique, highly engineered wire termination alternative to traditional terminal blocks utilized in LED outdoor lighting luminaires and HID (High Intensity Discharge) luminaires that include HPS (High Pressure Sodium) and MHL (Metal Halide Lamps) that are rapidly transitioning to LED luminaires.

Our LUMAWISE Endurance S connector system is a set of products specially designed for street and area lighting. The system consists of a receptacle mounted on the outdoor luminaire and several base and dome enclosures that house embedded electronics that sense, collect and analyze data from the surrounding harsh environment

Our LUMAWISE ALR series street lighting photocells are ANSI C136.10 compliant photo controls offering an economical and reliable means of controlling lighting systems from dusk to dawn. These products are engineered specifically to enhance lighting system performance and enable energy savings.

TE's solutions for street lighting provide reliable protection for the controls used in street and area outdoor lighting. With products such as dimming receptacles, photocells, shorting & open caps, and connectors, TE's components not only provide reliable protection, but enable increased control and management over street lighting architecture.

TE Connectivity (TE)’s NECTOR T Pluggable connectors provide an easy-to-use, pluggable power-distribution connector-cabling system, suited for moist and wet environments (sealed IP68).

CORCOM FB series power line filters are specially designed for fluorescent and LED light fixtures that utilize ballasts or drivers in up to 277VAC applications.

The new sealed CPC using UL F1-rated resin is excellent for UV resistance in outdoor applications. The UL F1 rating meets industry standards for long-term UV exposure, making the housings suitable for outside applications where parts are subject to frequent or extended periods of exposure to sun light.

NECTOR S connectors are engineered to reduce installation time in nearly any indoor lighting installation through a round, small form design.

Our LUMAWISE LED holders remove the need to solder allowing the LED to be directly attached to a heatsink using a 2* M3 screws at a standardized screw-pitch. In addition, they always have an optics landing zone at the same distance from the secondary optics.

TE Connectivity’s (TE) LUMAWISE Type Z LED Holders provide a quick and easy solderless connection to Chip-on-Board (CoB) LED arrays and are designed to enable customers to develop Zhaga compliant modules

Every electrical or electronic device has connections that are a potential source for electromagnetic or radio frequency interference (EMI/RFI). TE offers a catalog of over 70 Corcom filter series that provide solutions to your EMI or RFI signal issues.

TE's BUCHANAN WireMate connectors are easy-to-install poke-in wire-to-board connectors that accommodate multiple design requirements. (In the photo: Poke-In series (modular) appear at top; Slim Poke-In series (releasable) appear at bottom)

Our LIGHT-N-LOK poke-in connectors are tool-less wire-to-wire lighting connectors suitable for ballast disconnect and other lighting applications.

Our LUMAWISE Endurance S connector system is a set of products specially designed for street and area lighting. The system consists of a receptacle mounted on the outdoor luminaire and several base and dome enclosures that house embedded electronics that sense, collect and analyze data from the surrounding harsh environment

Thanks to its high density and compact design, the BUCHANAN WireMate connector Modular Screwless series is ideal for use in telecommunications equipment, lighting and security systems. The variety of combinations for wire entry and wire release bring flexibility to the design engineer. Wire release is accomplished without special tooling and different color configurations make identification easy.

TE Connectivity's portfolio of Low Power WAN (LPWAN) and Industrial, Scientific and Medical (ISM) antennas provides high performance connectivity for licensed and non-licensed low power and long range services- e.g. LoRa, UHF, Sigfox NB-IoT and Cat-M. Emerging cellular technologies including NB-IoT and Cat-M offer alternative LPWAN options.

From miniature SMD components to huge bespoke products, we offer a large range of Passive Components for use across many applications and the majority of industries. Many of our Power Resistors can be customized to meet your specific applications and needs.

Our SCHRACK relays combine power and sensitivity, making them ideal for a broad range of global applications.