This product is not currently available. For more information, including distributor inventory, please contact us.

Overview

TE's Raychem Medium voltage terminations for shielded cables are made of  our Raychem non-tracking tube together with a co-extruded stress control grading layer. This stress control layer is based on ceramic semi-conductor technology (ZnO) and provides superior discharge and impulse performance. When the tubing is shrunk down, the coating softens and sticks to irregular surfaces, providing moisture seals as well as electrical stress control.

Our Raychem Medium voltage terminations for shielded cables HVT-Z are fully qualified per IEEE-48 as Class I terminations to provide a long, trouble-free service life.

orange line

Key Features

  • Co-extruded one-piece termination
  • Built-in stress control
  • As an option, the HVT-Z can also be ordered with TE’s line of Aluminum Shear Bolt Terminals

 

  • These are range taking mechanical connectors that will accommodate a conductor range from #2 compact to 1000 kcmil stranded, Class B
orange line

FAQ

Frequently Asked Questions

Question: Is TE’s Raychem Medium Voltage Termination for Shielded Cables (HVT-Z) included in TE’s training program?

Answer: Yes, our Medium Voltage Terminations are designed using our Raychem heat shrink technology, so they are included in our installation training program. Learn more on TE.com/trainingcenter.

 

Question: With what type of conductor can I use TE’s Raychem Medium Voltage Terminations for Shielded Cables?

Answer: Our Raychem Medium Voltage Terminations can be used in any type of medium voltage shielded cables with copper or aluminum conductors.

 

Question: What are TE’s Raychem Medium Voltage Terminations for Shielded Cables made of?

Answer: The HVT-Z is made of our Raychem cross-linked polymeric EVA co-extruded with a zinc oxide matrix. The material of our heat shrink Medium Voltage Terminations is non-tracking, highly resistant to erosion, and UV.

 

Question: Which voltage range does TE’s Raychem Medium Voltage Termination for Shielded Cables cover?

Answer: Our HVT-Z covers voltage up to 35 kV, 200 kV BIL per IEEE.

Features

Please review product documents or contact us for the latest agency approval information.  

Product Type Features

  • Power Cable Termination Technology  Heat Shrink

  • Cable Shield Style  Tape

  • Insulation  Plastic

  • Sheds per Phase  1, 4

  • Mechanical Connectors Included  No, Yes

Configuration Features

  • Number of Cores  1

Electrical Characteristics

  • Power Cable Termination Voltage Class (kV) ≤ 15, ≤ 35, ≤ 8

Dimensions

  • Cross-Section Range (AWG/kcmil) 1 – 1/0, 1 – 4/0, 1250 – 2500, 1500 – 2500, 2 – 1/0, 2/0 – 350, 2/0 – 500, 250 – 350, 250 – 500, 350 – 500, 4 – 1/0, 400 – 1000, 400 – 500, 6 – 2, 600 – 1000, 600 – 1750, 750 – 1750

  • Power Cable Termination Insulation Diameter (in) .35 – .6, .6 – .95, .65 – .95, .8 – 1.07, .8 – 1.25, .85 – 1.25, 1.1 – 1.355, 1.1 – 1.4, 1.1 – 1.5, 1.1 – 1.75, 1.185 – 1.7, 1.215 – 1.65, 1.6 – 1.79, 1.6 – 2.45

  • Shed Inside Diameter (in) 3.74, 4.53, 5.32

  • Sheath Outside Diameter (in) .95, 1.2, 1.5, 2, 2.1, 2.75

  • Length (Installed) (in) 11.5, 19

  • Power Cable Termination Conductor Diameter (in) .184 – .292, .232 – .373, .292 – .373, .332 – .373, .332 – .528, .418 – .681, .418 – .813, .575 – .681, .575 – .813, .681 – .813, .73 – 1.152, .78 – .813, .78 – 1.152, .893 – 1.152, .893 – 1.526, .998 – 1.526, 1.289 – 1.76, 1.412 – 1.76

Operation/Application

  • Application Type  Indoor, Indoor/Outdoor

Industry Standards

  • Design Specification  IEEE 48

Product Availability

  • Power Cable Termination Product Availability  AMERICAS

Related Materials

Datasheets & Catalog Pages

Terms and Conditions

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

Disclaimer:
This information has been provided to your free of charge for your use but remains the sole property of TE Connectivity Corporation (''TE'') or SnapEDA,  Inc. or Ultra Librarian/EMA Design Automation, Inc. (collectively, "Company"). While Company has used reasonable efforts to ensure its accuracy, Company does not guarantee that it is error-free, not makes any other representation, warranty, or guarantee that the information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by customers. Company expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular purpose.