Increased clinical data with our micro-invasive pressure sensor
The IntraSense series absolute pressure sensors are designed to fit into a 1-French hypo tube. The sensor comes pre-attached to cabling, simplifying the connection for the end user. The fully encapsulated electronics allow the device to be used without additional gel or encapsulant. This sensor compares pressure in vivo to an onboard vacuum cavity for reference to an absolute standard. It delivers accurate and stable pressure for acute procedures in the clinically useful range of -300mmHg to +500mmHg (460mmHg to 1260mmHg absolute) and from 10°C to 60°C. The output is stable in 37°C saline, with typical drifts of <2mmHg absolute maximum per 24 hours. The device is available either as a sensor plus cable, or with an optional 4- pin PCB board attached to the proximal end.
IntraSense sensor die measures 750μm × 220μm × 75μm
Accurate pressure sensing anywhere in the anatomy
Uses resistive MEMS technology and encapsulated wire/pad junctions for easy integration
Optional light shield to reduce light sensitivity
Designed to be used without additional gel
High part-to-part and IoT-to-IoT repeatability
TE provides the sensor with the cable pre-attached
TE Connectivity’s IntraSense is one of the most miniature pressure sensors in the market and simplifies pressure monitoring directly in the anatomy, enabling more controlled procedures and better clinical data.
Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.
This information has been provided to your free of charge for your use but remains the sole property of TE Connectivity Corporation (''TE'') or SnapEDA, Inc. or Ultra Librarian/EMA Design Automation, Inc. (collectively, "Company"). While Company has used reasonable efforts to ensure its accuracy, Company does not guarantee that it is error-free, not makes any other representation, warranty, or guarantee that the information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by customers. Company expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular purpose.