Cable Stripping with Speed, Precision, and Quality
Our latest HV-CP Version II machine excels in stripping the outer jacket of a cable, foil shield, braid shield, and inner insulation, while also facilitating braid fold back operations tailored to your customer’s termination specifications.
Features and Benefits
Advanced High-Performance Tool
- Braid fold back operation
- Braid is cut with an axial shearing operation to improve tooling life
- No vacuum to remove debris, less energy consumption
- Wire strip length up to 120mm; capable of processing up to 180mm strip lengths but results may vary based on cable size, type, and machine settings.
- Laser array machine start sensor with industrialized control system
- Improved lifetime of wear parts
- High force linkage assembly to shear braid
- Simplified robust mandrel alignment system, increasing alignment precision and accuracy
Customizable
- Customizations available to meet your production requirements
Support
- Our machines are supported by an established, experienced and responsive field service organization
- Field engineers are located worldwide and are available to assist with on-site and remote service; selection and installation of new equipment; training; and technical support
HV-CP Version II Specifications
| Description | Specification |
|---|---|
| Wire Cross Section | 10 mm2 - 120 mm2 |
| Max. Outer Diameter | 25.0 mm (1 in) |
| Min Dia. (Inner Conductors) | 6.0 mm (0.24 in) |
| Min Cable Length | 100 mm (4 in) |
| Tooling Changeover | 3-5 min |
| Avg. Cycle Time | 20s |
| Increments for Incision Diameter | 0.01 mm (0.0004 in) |
| Increments for Incision Length | 0.01 mm (0.0004 in) |
| Maximum Outer Jacket Strip Length | 120 mm (4.72 in)* |
| Profile Library | Up to 1500 Articles |
| Max Sequence Functions | Up to 100 Steps |
*Machine is capable of stripping cables up to 180mm [7.09 in] in length, but is highly dependent on cable manufacture, cable size, and machine setup. Not all applications may be possible.
TE Connectivity’s (TE) new HV-CP Version II machine excels in stripping the outer jacket of a cable, foil shield, braid shield, and inner insulation, while also facilitating braid fold back operations tailored to your customer’s termination specifications.
