Magnet Wire
Cluster Blocks
One piece housing connectors that are fully insulated, giving a quick-connect means for electrically connecting sealed hermetic header pins on compressors. Connectors accept pins from one side so reversing the polarity is prevented.
Browse the catalog:
COPALUM Splices
Butt and parallel splices that terminate to copper or aluminum wire. Aluminum wire sizes range from 8 to 4/0 [8.6 to 110.9 mm2] and copper 10 to 3/0 [4.8 to 85.9 mm2]. Sealing is an option.
Browse the catalog:
COPALUM Terminals
Flag and straight terminals that terminate to copper or aluminum wire. Aluminum wire sizes range from 8 to 4/0 [8.6 to 110.9 mm2] and copper 10 to 3/0 [4.8 to 85.9 mm2]. Sealing is an option.
Browse the catalog:
Crimpband Splices
Non-magnetic splices are available in 3, 6, 7, 8, 9, 10, 14 and 20 ridge serrations for terminations in the 170 to 13,000 CMA range. Magnetic wire splices are available in 7, 9, 11 and 13 serrations for terminations in the 400 to 13,000 CMA range.
Browse the catalog:
MAG-MATE Terminals
IDC terminals available in poke-in, poke-in tab, splice, crimp wire barrel, solder post, quick connect tab, pin and receptacle styles. Selections terminate magnet wire ranging from 12 AWG up to 52 AWG.
Browse the catalog:
Magnet Wire Splices
Specifically designed to terminate magnet wire to itself or in combination with standard solid or stranded lead wire. The splices have machined, sharp edged serrations inside the crimp barrels. These serrations, made by a special production process, pierce the insulating layer of magnet wires in a manner that provides a large contact area.
Browse the catalog:
SIAMEZE Terminals
A full selection of insulation displacement (IDC) terminals for interconnecting copper magnet wires, lead wires, and other components. Terminals are available in wire-to-wire, Lead Lok, quick disconnect tabs, posts, pin and receptacle terminals.
Browse the catalog:
Splices - Open Barrel
A crimped terminal (insulated or non-insulated) that joins two wires together with the barrel open. Serration choices can be made as well as thru or pigtail splicing types are available.
Browse the catalog:
TERMI-FOIL Terminals & Splices
Designed to use aluminum foil or strip instead of copper wire windings. Terminals are available in two types: wire to foil styles (for AWG wire Sizes 22 to 8 [0.3 to 8 mm²] and larger tap types (in lengths up to 15 in. [381 mm]).
Browse the catalog:
If your browser cookies are cleared, your temporary list will be lost. You can save this list and get all of the My Part List features by becoming a registered user of the TE web site.
Remove Note