Our website has detected that you are using an unsupported browser that will prevent you from accessing certain features.
We strongly recommend that you upgrade to the most recent version of your browser.
This transducer is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam and corrosive fluids. The transducer pressure cavity is machined from a solid piece of 17-4 PH stainless steel. The standard version includes a 1/4 NPT pipe thread allowing a leak-proof, all metal sealed system. There are no o-rings or organics exposed to the pressure media and the durability is excellent. This automotive grade pressure transducer with stainless steel hermetic pressure ports and integral electrical connector can boast up to 10,000psi (700Bar). The M7100 is UL certified and exceeds the latest industrial CE requirements including surge protection and is overvoltage protected in both positive and reverse polarity.
Hermetic Pressure Ports
Integral Electrical Connector
Survives High Vibration
Water Resistant 1M Immersion
Performance standard on and off highway engine and vehicle OEMs
Rugged for heavy equipment and outdoor use
Designed specifically for high volume applications
Stainless steel wetted surfaces
Medium to high pressures
Please review product documents or contact us for the latest agency approval information.
Product Type Features
Sensor Type Industrial Pressure Transducers
Supply Voltage (V)4.75 – 5.25, 8 – 32
Electrical Connection Amp, Cable 1 m, Cable 10 ft, Cable 10 m, Cable 2 ft, Cable 2 m, Cable 4 ft, Cable 5 m, M12, Packard, Sumitomo
Port Material 17-4PH
Pressure Port/Fitting 1/4 Flare Gasket, 1/4 MNPT, 1/8 MNPT, 7/16-20 UNF Female with Integral Valve, 7/16-20 UNF Male Buna-N, G1/4 BS5380 Female, G1/4 BS5380 Male, G1/4 DIN3852 Gasket Male, M10x1 Male, M12x1.5 Male, M14x1.5 Male, R1/4 Male
Dimensions26.7 x 26.7 x 50 mm [ 1.05 x 1.05 x 1.97 in ]
Please carefully read the disclaimer before using any of this data.
Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.
This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation ("TE"). While TE has used reasonable efforts to ensure its accuracy, TE does not guarantee that it is error-free, nor makes any other representation, warranty, or guarantee that the information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by customers. TE expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular purpose.