Contact us to request more information about this model, including customization options

Contact Us

Designed expressly for use in 24 Volt systems with PLCs and mini-PLCs, or in 12 Volt mobile and vehicular testing systems, it offers the user a choice of three analog outputs: 0 to ±10 V DC, 0 to 10 V DC, or 4 to 20 mA (sourcing) current loop in a 3-wire common ground system in which the power ground is connected to the output signal’s ground.  The LVC-2500 is packaged in a DIN-rail mounting thermoplastic case with recessed screw-clamp terminals for all connections and multi-turn front-panelaccessible span and zero adjustments. It uses internal circuitry that produces a low distortion sine wave to excite the LVDT and employs a synchronous demodulator to convert the LVDT’s AC output signal to more useful DC outputs proportional to core position. Additional circuitry regulates the ASIC’s DC operating power and provides span and zero adjustability, a 2-pole low pass output filter, and the voltage-to-current conversion that drives the 4-20 mA current loop output. 


  • DIN-rail mountable
  • Analog voltage or current loop output
  • Non-interactive adjustments
  • No phase adjustment needed
  • Supports all standard LVDTs and VR half-bridge sensors 

Please review product documents or contact us for the latest agency approval information.  

Electrical Characteristics

  • Line Power Voltage Requirements (VDC) 10 – 30

  • Output Type (mA) 4 – 20

  • Output Type (VDC) 0 – 10, ±10

  • Excitation Voltage (Vrms) 3

Signal Characteristics

  • Excitation Frequency (kHz) 10, 2.5, 5

Body Features

  • Weight (g) 129

Mechanical Attachment

  • Mounting  DIN 1, DIN 3

Usage Conditions

  • Operating Temperature Range -20 – 70 °C [ 0 – 160 °F ]


  • Transducer Type  LVDT, LVRT Half Bridge, RVDT

  • Transducer Channels  1

  • Display  No

Related Materials

Terms and Conditions

Please carefully read the disclaimer before using any of this data.
Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of TE Connectivity Corporation ("TE"). While TE has used reasonable efforts to ensure its accuracy, TE does not guarantee that it is error-free, nor makes any other representation, warranty, or guarantee that the information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by customers. TE expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular purpose.