Build and price the product now


Operating on either a ±12 or ±15VDC supply voltage, the LVM-110 delivers a full range of selectable unipolar and bipolar, low noise DC voltage outputs.  Designed to be compatible with most LVDT and RVDT transducers, the LVM-110 will operate with 5 and 6 electrical connection devices. This versatility is due to the wide variety of selectable excitation frequencies, and a generous excitation drive current of 20mA, allowing operation with transducer input impedances as low as 150 Ohms. The master/slave function (DIP switch selectable) allows synchronization of multiple conditioners to prevent beat frequencies and cross talk between transducers. The need for phase correction adjustment is eliminated thanks to demodulation synchronized to the sum of the LVDT/RVDT outputs. 


  • Low cost OEM signal conditioner
  • Very compact, open PC board design
  • Multiple unipolar and bipolar output options
  • DIP switch selectable gain and excitation
  • 2.5, 5, 8 and 10kHz excitation frequencies
  • Zero and span adjustment potentiometers
  • Master/slave capability
  • Card-edge or barrier strip connections
  • Works with very low input impedance LVDTs and RVDTs 


Please review product documents or contact us for the latest agency approval information.  

Electrical Characteristics

  • Line Power Voltage Requirements (VDC) ±12, ±15

  • Output Type (VDC) 0 – 10, 0 – 5, ±10, ±5

  • Excitation Voltage (Vrms) 3

Signal Characteristics

  • Excitation Frequency (kHz) 10, 2.5, 5, 8

Mechanical Attachment

  • Mounting  Printed Circuit Board Edge or Terminal Block

Usage Conditions

  • Operating Temperature Range  -1 – 55 °C [ 30 – 130 °F ]


  • Transducer Type  LVDT or RVDT with 5 or 6 wires

  • Transducer Channels  1

  • Display  No

Related Materials

Datasheets/Catalog Pages

Product Specifications

Manual/User Guide

Terms and Conditions

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to your free of charge for your use but remains the sole property of TE Connectivity Corporation (''TE'') or SnapEDA,  Inc. or Ultra Librarian/EMA Design Automation, Inc. (collectively, "Company"). While Company has used reasonable efforts to ensure its accuracy, Company does not guarantee that it is error-free, not makes any other representation, warranty, or guarantee that the information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by customers. Company expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular purpose.