Overview

"TE Connectivity’s (TE's) ELB-35 series deadbreak elbows are fully shielded and fully submersible and meet the requirements of IEEE Standard 386. They are interchangeable with other manufacturers’ products that conform with this industry standard. Molded semiconducting shield provides ground shield continuity per the requirements of IEEE 592. Meets IEEE 386-2006 specification requirements.

They are designed for use on extruded (XLPE or EPR) solid dielectric cable. The conductor range is from 1/0 AWG to 1250 kcmil for aluminum or copper conductors with insulation diameters from .930” to 2.145”. The ELB-35-610 elbow has a capacitive test point molded into the elbow body which provides a means of sensing voltage and provides an attachment point for test point fault indicators. 900 A ratings (ELB-35-900 or ELB-35-910) can be achieved by ordering the kit with a copper shearbolt terminal."

KEY FEATURES

  • Peroxide cured EPDM rubber ensures low tension set and high dielectric strength
  • 100% factory production tested for partial discharge and AC Hipot per IEEE 386
  • Optional capacitive test point provided on elbow
  • Fits 35 kV cables up to 1250 kcmil
  • 900 A capability is available

Features

Please review product documents or contact us for the latest agency approval information.  

Product Type Features

  • Technology  Separable Connector

  • Connector Type  Crimp, Mechanical

  • Bushing Type  600A

  • Insulation  Polymeric

  • Screened  Yes

  • Product Family  ELB-35

Electrical Characteristics

  • Voltage Class (kV) ≤ 35

Body Features

  • Conductor Material  Aluminum/Copper

Dimensions

  • Insulation Diameter (mm) 23.6 – 26.4, 24.9 – 28.3, 26.4 – 29.8

  • Cross-Section Range (AWG/kcmil) 1, 1/0, 2 – 350, 4/0

Operation/Application

  • Halogen Free  Yes

  • Free of Lead, Cadmium, Heavy Metals  Yes

  • Emission Free  Yes

  • Non-Toxic & Non-Corrosive Emission  Yes

  • Application Type  T-Connector

Industry Standards

  • Design Specification  IEEE 386

  • UL Rating  No

Product Availability

  • Product Availability  AMERICAS

Other

  • Installation Instruction  English

Related Materials

Terms and Conditions

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

Disclaimer:
This information has been provided to your free of charge for your use but remains the sole property of TE Connectivity Corporation (''TE'') or SnapEDA,  Inc. or Ultra Librarian/EMA Design Automation, Inc. (collectively, "Company"). While Company has used reasonable efforts to ensure its accuracy, Company does not guarantee that it is error-free, not makes any other representation, warranty, or guarantee that the information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by customers. Company expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular purpose.