221629-4 Coax Terminators  1
  • Cable Type Coaxial
  • Connector System Cable-to-Board
  • Sealable No
  • Grade Commercial
  • Product Type Terminator
  • Isolated Ground No
  • Dielectric Material Polyethylene
  • Number of Positions 1
  • Solder Terminal Without
  • Number of Ports 1
  • Tether Without
  • Impedance 50
  • Resistor Specification 50 Ω
  • Body Plating Material Nickel
  • Body Style Straight
  • Body Insulation Without
  • Body Material Brass
  • Center Contact Material Brass
  • Center Contact Plating Material Gold
  • Polarized No
  • Surface Mountable No
  • Circuit Application Signal
  • Packaging Method Loose Piece
  • Packaging Quantity 100
5222117-1 In-Series Adapters  1
  • RF Connector Type BNC
  • Connector System Cable-to-Cable
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Dielectric Material Polymethylpentene
  • Grade Commercial
  • Isolated Ground No
  • Product Type Adapter
  • Number of Positions 1
  • Number of Ports 1
  • Solder Terminal Without
  • Snap-Lock Without
  • Impedance 75
  • Body Plating Material Nickel
  • Body Style Straight
  • Body Material Zinc
  • Body Insulation Without
  • Center Contact Material Beryllium Copper
  • Center Contact Plating Material Gold
  • Panel Mount Feature Type Bulkhead
  • PCB Mount Retention Without
  • Connector Mounting Type Bulkhead
  • Safety Wire Holes Without
  • Panel Attachment Style Front Mount
  • Polarized No
  • Circuit Application Power & Signal
  • Packaging Method Carton
5413631-2 RF Connectors  1
  • Connector Interface BNC
  • Connector Style Jack
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single Port
  • Number of Positions 1
  • PCB Mount Orientation Right Angle
  • Number of Coaxial Contacts 1
  • Impedance 50
  • Body Material Zinc
  • Body Plating Material Tin
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Beryllium Copper
  • Termination Method to Printed Circuit Board Through Hole
  • PCB Mount Retention Without
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Panel
  • RF Contact Captivation Method Mechanical
  • Detent With
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Height above PCB 10.97
  • PCB Tail Length 4.34
  • Operating Temperature Range -55 – 85
  • Operating Frequency 4
  • Packaging Method Carton
  • Dielectric Material PTFE
  • Grade Commercial
6274425-2 RF Connectors  1
  • Connector Interface BNC
  • Connector Style Jack
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single Port
  • Number of Positions 1
  • PCB Mount Orientation Right Angle
  • Number of Coaxial Contacts 1
  • Impedance 75
  • Body Material Zinc
  • Body Plating Material Tin
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Beryllium Copper
  • Termination Method to Printed Circuit Board Through Hole
  • PCB Mount Retention Type Hold-Down Post
  • Panel Mount Feature Type Lockwasher and Nut
  • PCB Mount Retention With
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Panel
  • RF Contact Captivation Method Mechanical
  • Detent With
  • Panel Attachment Style Rear Mount
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Height above PCB 10.97
  • PCB Tail Length 5.1
  • Mounting Post Length 4.34
  • Operating Temperature Range -55 – 85
  • Operating Frequency 2
  • Packaging Method Tray
  • Dielectric Material PTFE
  • Grade Commercial
5222092-1 RF Connectors  1
  • Connector Interface BNC
  • Connector Style Jack
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single Port
  • Number of Positions 1
  • PCB Mount Orientation Right Angle
  • Number of Coaxial Contacts 1
  • Impedance 75
  • Body Material Zinc
  • Body Plating Material Nickel
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Beryllium Copper
  • Termination Method to Printed Circuit Board Through Hole
  • PCB Mount Retention Type Hold-Down Post
  • Panel Mount Feature Type Lockwasher and Nut
  • PCB Mount Retention With
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Panel
  • RF Contact Captivation Method Mechanical
  • Detent With
  • Panel Attachment Style Rear Mount
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Height above PCB 15.88
  • PCB Tail Length 10.92
  • Mounting Post Length 2.16
  • Operating Temperature Range -55 – 85
  • Operating Frequency 2
  • Packaging Method Tray
  • Dielectric Material Polymethylpentene
  • Grade Commercial
  • Comment If an Insulating Bushing is required, see Part Number 330620.
5415025-2 RF Connectors  1
  • Connector Interface BNC
  • Connector Style Jack
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single Port
  • Number of Positions 1
  • PCB Mount Orientation Right Angle
  • Number of Coaxial Contacts 1
  • Impedance 50
  • Body Material Zinc
  • Body Plating Material Tin
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Phosphor Bronze
  • Termination Method to Wire & Cable Crimp
  • Termination Method to Printed Circuit Board Through Hole
  • PCB Mount Retention Type Hold-Down Post
  • Panel Mount Feature Type Lockwasher and Nut
  • PCB Mount Retention Without
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Panel
  • RF Contact Captivation Method Mechanical
  • Detent With
  • Panel Attachment Style Rear Mount
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Height above PCB 10.97
  • PCB Tail Length 4.34
  • Mounting Post Length 4.34
  • Operating Temperature Range -55 – 85
  • Operating Frequency 4
  • Packaging Method Tray
  • Dielectric Material PTFE
  • Additional Features Hardware Included
  • Grade Commercial
5413631-1 RF Connectors  1
  • Connector Interface BNC
  • Connector Style Jack
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single Port
  • Number of Positions 1
  • PCB Mount Orientation Right Angle
  • Number of Coaxial Contacts 1
  • Impedance 50
  • Body Material Zinc
  • Body Plating Material Nickel
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Beryllium Copper
  • Termination Method to Printed Circuit Board Through Hole
  • PCB Mount Retention Without
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Panel
  • RF Contact Captivation Method Mechanical
  • Detent With
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Height above PCB 10.97
  • PCB Tail Length 4.34
  • Operating Temperature Range -55 – 85
  • Operating Frequency 4
  • Packaging Method Package
  • Dielectric Material Polymethylpentene
  • Grade Commercial
5222092-3 RF Connectors  1
  • Connector Interface BNC
  • Connector Style Jack
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single Port
  • Number of Positions 1
  • PCB Mount Orientation Right Angle
  • Number of Coaxial Contacts 1
  • Impedance 75
  • Body Material Zinc
  • Body Plating Material Nickel
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Beryllium Copper
  • Termination Method to Printed Circuit Board Through Hole
  • PCB Mount Retention Type Hold-Down Post
  • Panel Mount Feature Type Lockwasher and Nut
  • PCB Mount Retention With
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Panel
  • RF Contact Captivation Method Mechanical
  • Detent With
  • Panel Attachment Style Rear Mount
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Height above PCB 15.88
  • PCB Tail Length 10.92
  • Mounting Post Length 3.48
  • Operating Temperature Range -55 – 85
  • Operating Frequency 2
  • Packaging Method Tube
  • Dielectric Material Polymethylpentene
  • Grade Commercial
  • Comment If an Insulating Bushing is required, see Part Number 330620.
5414907-1 RF Connectors  1
  • Connector Interface BNC
  • Connector Style Jack
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single Port
  • Number of Positions 1
  • PCB Mount Orientation Right Angle
  • Number of Coaxial Contacts 1
  • Impedance 75
  • EMI & RFI Protection Type PCB Ground
  • Body Material Zinc
  • Body Plating Material Nickel
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Beryllium Copper
  • Termination Method to Printed Circuit Board Through Hole
  • PCB Mount Retention Type Hold-Down Post
  • Panel Mount Feature Type Lockwasher and Nut
  • PCB Mount Retention With
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Panel
  • RF Contact Captivation Method Mechanical
  • Detent With
  • Panel Attachment Style Rear Mount
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Height above PCB 12.7
  • PCB Tail Length 4.11
  • Mounting Post Length 3.48
  • Operating Temperature Range -55 – 85
  • Operating Frequency 11
  • Packaging Method Tube
  • Dielectric Material Polymethylpentene
  • Grade Commercial
  • Comment If an Insulating Bushing is required, see Part Number 330620.
5222132-1 RF Connectors  1
  • Connector Interface BNC
  • Connector Style Jack
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single Port
  • Number of Positions 1
  • PCB Mount Orientation Vertical
  • Number of Coaxial Contacts 1
  • Impedance 75
  • Body Material Die Cast Zinc
  • Body Plating Material Nickel
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Beryllium Copper
  • Termination Method to Printed Circuit Board Through Hole - Solder
  • PCB Mount Retention Type Hold-Down Post
  • Panel Mount Feature Type Lockwasher and Nut
  • PCB Mount Retention With
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Panel
  • RF Contact Captivation Method Mechanical
  • Detent With
  • Panel Attachment Style Rear Mount
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Height above PCB 34.93
  • PCB Tail Length 5.33
  • Mounting Post Length 3.48
  • Operating Temperature Range -55 – 85
  • Operating Frequency 4
  • Packaging Method Tube
  • Dielectric Material Polymethylpentene
  • Grade Commercial
5221199-5 RF Connectors  1
  • Connector Interface BNC
  • Connector Style Jack
  • Connector System Cable-to-Cable
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Port Configuration Single Port
  • Number of Positions 1
  • Number of Coaxial Contacts 1
  • Impedance 75
  • Cable Connector Orientation Straight
  • Body Material Zinc
  • Body Plating Material Nickel
  • Body Insulation Without
  • Crimp Type Dual
  • Center Contact Plating Material Gold
  • Center Contact Material Beryllium Copper
  • Termination Method to Wire & Cable Crimp
  • RF Connector Coupling Mechanism Bayonet
  • RF Contact Captivation Method Mechanical
  • Detent With
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Cable Type RG 179
  • Operating Temperature Range -65 – 85
  • Operating Frequency 2
  • Packaging Method Bag
  • Dielectric Material Polyethylene
  • Coupling Nut Material Brass
  • Grade Commercial
5415025-1 RF Connectors  1
  • Connector Interface BNC
  • Connector Style Jack
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single Port
  • Number of Positions 1
  • PCB Mount Orientation Right Angle
  • Number of Coaxial Contacts 1
  • Impedance 50
  • Body Material Zinc
  • Body Plating Material Tin
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Phosphor Bronze
  • Termination Method to Wire & Cable Crimp
  • Termination Method to Printed Circuit Board Through Hole
  • Panel Mount Feature Type Lockwasher and Nut
  • PCB Mount Retention Without
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Panel
  • RF Contact Captivation Method Mechanical
  • Detent With
  • Panel Attachment Style Rear Mount
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Height above PCB 10.97
  • PCB Tail Length 4.34
  • Operating Temperature Range -55 – 85
  • Operating Frequency 4
  • Packaging Method Tray
  • Dielectric Material Polymethylpentene
  • Additional Features Hardware Included
  • Grade Commercial
5221185-8 RF Connectors  1
  • Connector Interface BNC
  • Connector Style Plug
  • Connector System Cable-to-Cable
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Port Configuration Single Port
  • Number of Positions 1
  • Number of Coaxial Contacts 1
  • Impedance 75
  • Cable Connector Orientation Straight
  • Body Material Die Cast Zinc
  • Body Plating Material Nickel
  • Body Shape Circular
  • Body Insulation Without
  • Crimp Type Dual
  • Center Contact Plating Material Gold
  • Center Contact Material Brass
  • Termination Method to Wire & Cable Crimp
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Cable Mount
  • RF Contact Captivation Method Mechanical
  • Detent With
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Cable Type RG 179
  • Operating Temperature Range -65 – 85
  • Operating Frequency 2
  • Packaging Method Carton
  • Dielectric Material Polyethylene
  • Coupling Nut Material Brass
  • Grade Commercial
5413558-1 RF Connectors  1
  • Connector Interface BNC
  • Connector Style Jack
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single Port
  • Number of Positions 1
  • PCB Mount Orientation Right Angle
  • Number of Coaxial Contacts 1
  • Impedance 75
  • Body Material Zinc
  • Body Plating Material Nickel
  • Body Shape Circular
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Beryllium Copper
  • Termination Method to Printed Circuit Board Through Hole
  • PCB Mount Retention Without
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Board Mount
  • RF Contact Captivation Method Mechanical
  • Detent With
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Height above PCB 10.97
  • PCB Tail Length 4.34
  • Operating Temperature Range -55 – 85
  • Operating Frequency 2
  • Packaging Method Carton
  • Dielectric Material Polymethylpentene
  • Grade Commercial
222117-1 In-Series Adapters  1
  • RF Connector Type BNC
  • Connector System Cable-to-Cable
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Dielectric Material Polymethylpentene
  • Grade Commercial
  • Isolated Ground No
  • Product Type Adapter
  • Number of Positions 1
  • Number of Ports 1
  • Solder Terminal Without
  • Snap-Lock Without
  • Impedance 75
  • Body Plating Material Nickel
  • Body Style Straight
  • Body Material Zinc
  • Body Insulation Without
  • Center Contact Material Beryllium Copper
  • Center Contact Plating Material Gold
  • Panel Mount Feature Type Bulkhead
  • PCB Mount Retention Without
  • Connector Mounting Type Bulkhead
  • Safety Wire Holes Without
  • Panel Attachment Style Rear Mount
  • Polarized No
  • Circuit Application Power & Signal
  • Packaging Method Carton
5221185-9 RF Connectors  1
  • Connector Interface BNC
  • Connector Style Plug
  • Connector System Cable-to-Cable
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Port Configuration Single Port
  • Number of Positions 1
  • Number of Coaxial Contacts 1
  • Impedance 75
  • Cable Connector Orientation Straight
  • Body Material Die Cast Zinc
  • Body Plating Material Nickel
  • Body Shape Circular
  • Body Insulation Without
  • Crimp Type Dual
  • Center Contact Plating Material Gold
  • Center Contact Material Brass
  • Termination Method to Wire & Cable Crimp
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Cable Mount
  • RF Contact Captivation Method Mechanical
  • Detent With
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Cable Type Belden 8212
  • Operating Temperature Range -65 – 85
  • Operating Frequency 2
  • Packaging Method Carton
  • Dielectric Material Polyethylene
  • Coupling Nut Material Brass
  • Grade Commercial
5413558-2 RF Connectors  1
  • Connector Interface BNC
  • Connector Style Jack
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single Port
  • Number of Positions 1
  • PCB Mount Orientation Right Angle
  • Number of Coaxial Contacts 1
  • Impedance 75
  • Body Material Zinc
  • Body Plating Material Tin
  • Body Shape Circular
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Beryllium Copper
  • Termination Method to Printed Circuit Board Through Hole
  • PCB Mount Retention Without
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Board Mount
  • RF Contact Captivation Method Mechanical
  • Detent With
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Height above PCB 10.97
  • PCB Tail Length 4.34
  • Operating Temperature Range -55 – 85
  • Operating Frequency 2
  • Packaging Method Carton
  • Dielectric Material Polymethylpentene
  • Grade Commercial
5414373-1 RF Connectors  1
  • Connector Interface BNC
  • Connector Style Jack
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single Port
  • Number of Positions 1
  • PCB Mount Orientation Right Angle
  • Number of Coaxial Contacts 1
  • Impedance 50
  • Body Material Zinc
  • Body Plating Material Nickel
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Phosphor Bronze
  • Termination Method to Printed Circuit Board Through Hole
  • PCB Mount Retention Without
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Panel
  • RF Contact Captivation Method Mechanical
  • Detent With
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Height above PCB 8.64
  • PCB Tail Length 2.79
  • Operating Temperature Range -55 – 85
  • Operating Frequency 4
  • Packaging Method Tray
  • Dielectric Material Polymethylpentene
  • Grade Commercial
5415417-1 RF Connectors  1
  • Connector Interface BNC
  • Connector Style Jack
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single Port
  • Number of Positions 1
  • PCB Mount Orientation Right Angle
  • Number of Coaxial Contacts 1
  • Impedance 75
  • Body Material Zinc
  • Body Plating Material Nickel
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Phosphor Bronze
  • Termination Method to Printed Circuit Board Through Hole
  • PCB Mount Retention Type Hold-Down Post
  • Panel Mount Feature Type Lockwasher and Nut
  • PCB Mount Retention With
  • RF Connector Coupling Mechanism Bayonet
  • Connector Mounting Type Panel
  • RF Contact Captivation Method Solder
  • Detent With
  • Panel Attachment Style Rear Mount
  • RF Connector Mated Outer Diameter (Approximate) 14.529
  • Height above PCB 12.7
  • PCB Tail Length 4.11
  • Mounting Post Length 3.48
  • Operating Temperature Range -55 – 85
  • Operating Frequency 11
  • Packaging Method Tray
  • Dielectric Material Polymethylpentene
  • Grade Commercial
  • Comment If an Insulating Bushing is required, see Part Number 330620.
5221629-4 Coax Terminators
  • Cable Type Coaxial
  • Sealable No
  • Grade Commercial
  • Product Type Terminator
  • Isolated Ground No
  • Dielectric Material Polyethylene
  • Number of Positions 1
  • Solder Terminal Without
  • Number of Ports 1
  • Tether Without
  • Impedance 50
  • Resistor Specification 50 Ω
  • Body Plating Material Nickel
  • Body Style Straight
  • Body Insulation Without
  • Center Contact Material Brass
  • Center Contact Plating Material Gold
  • Polarized No
  • Surface Mountable No
  • Operating Temperature Range -55 – 85
  • Circuit Application Signal
  • Packaging Method Loose Piece
  • Packaging Quantity 100