Connected Home

A through-hole resistor is a fixed resistor that has long, pliable leads that can be stuck into a breadboard or hand- or wave-soldered into a printed circuit board. A through-hole resistor is used to reduce the flow of electrical current within a circuit. It’s commonly composed of carbon film, metal film, metal oxide film, thick film, or wirewound.

Achieve easy mating and unmating with positive audible latch. Prevent post misalignment with polarization tabs.

A surface mount resistor is a tiny rectangular ceramic body with silver conductive edges on either end. They provide the same functionality as the more traditional axially leaded resistors but has a lower power dissipation capacity and oftentimes a lower stray inductance and capacity.

A DIP switch is a manual electronic package that is composed of a series of tiny switches. It has a rectangular casing and two parallel rows of connecting terminals. A SIP switch is a computer chip package that has a single row of connection pins.

Designed for parallel board stacking applications using sub-miniature connectors, these free height connectors fit a broad spectrum of interconnect uses.

Tactile switches provide tactile feedback to the user when the switch or button makes contact with the control panel underneath, which is usually a printed circuit board.

Achieve low signal/power connections in a 1.0mm to 2.5mm centerline footprint. Prevent contact stubbing with polarized housings.

Screwless Terminal Blocks are suitable for both solid and stranded wires and offers a fast way to complete wire connections.

Help ensure contacts are fully seated and protect against contact backout with optional Terminal Position Assurance. Achieve connector system engagement in high vibration applications with Connector Position Assurance.

Designed to mate with a control, switch or printed circuit board.

Reduce electrical noise and gain up to Cat5e performance. Suitable for a broad range of applications with diverse product configurations.

Compact signal double lock connectors offer secondary locking in wire-to-wire and wire-to-board configurations.

Designed for soldering and pick-and-place equipment, this versatile product will help eliminate the cost of specialized equipment while allowing for quick design changes in a small, common footprint.

Surface mount antennas offer several frequency ranges for use in virtually any wireless device with a small form factor.

Accommodate Wi-Fi, Bluetooth, ZigBee and other frequency bands with broad product offering. Achieve rapid support with a range of readily available standard antennas.

IM Relays are the smallest signal relay offered by TE and are offered in a low profile package with through hole or surface mount terminals, ideal for applications with space constraints.

Signal relays have expanded well beyond the telecommunication applications for which they were initially designed. They can be found in programmable thermostats and other subsystems of HVAC and energy management equipment, as well as security, access control, fire detection and alarm systems.

Meets a broad range of power switching requirements. Maximum design flexibility with one or two pole configurations. Designed for harsh environments and long life cycles.

Main Features: different actuator lengths and styles, multiple actuation forces, sealed and u-sealed available, right-angle THT and SMT versions, bulk pack and T&R

Bifurcated gold wiping contact design no tape seal needed, standard .100 CL and ½ pitch .05 CL THT, and SMT termination Multiple actuator styles available, T&R and tube packaging standard.

Compact slide switch offering a sealed and unsealed version.

Our humidity sensors are designed to improve performance, reduce energy consumption, and increase safety in many environments where temperature affects performance.

TE offers a wide range of temperature measurement, control, and compensation sensing applications.

Magneto Resistive sensors offer robust non-contact measurement of changes in the magnetic field as seen by the sensor. This effect allows for the creation of sensors that can detect disturbances ranging from extremely weak fields, as found in traffic detection sensors, to strong field sensors that are used in precision encoders.

We design and manufacture pressure sensors ranging from the sensing element to system packaging for harsh environments.

We design and manufacture pressure sensors ranging from the sensing element to system packaging for harsh environments.

Achieve easy mating and unmating with positive audible latch. Prevent post misalignment with polarization tabs.

A chassis mount resistor is designed to promote heat loss and cooling. This resistor is manufactured using wirewound resistor technology and features a ceramic core that is molded into an extruded aluminum chassis mount housing.

Eurostyle terminal blocks feature a rising cage clamp which promotes numerous reliable connections and disconnections at field installations.

A potentiometer is a manually adjustable variable resistor that allows you to change and regulate the current flowing through a resistor.

Designed for parallel board stacking applications using sub-miniature connectors, these free height connectors fit a broad spectrum of interconnect uses.

Tactile switches provide tactile feedback to the user when the switch or button makes contact with the control panel underneath, which is usually a printed circuit board.

Achieve low signal/power connections in a 1.0mm to 2.5mm centerline footprint. Prevent contact stubbing with polarized housings.

A snap action switch is a mechanical switch that sends a rapid transfer of contacts from one position to another. Also known as micro switches, snap action switches can be momentary or maintained contact and come in subminiature, miniature, and standard styles.

Screwless Terminal Blocks are suitable for both solid and stranded wires and offers a fast way to complete wire connections.

Help ensure contacts are fully seated and protect against contact backout with optional Terminal Position Assurance. Achieve connector system engagement in high vibration applications with Connector Position Assurance.

Designed to mate with a control, switch or printed circuit board.

Reduce electrical noise and gain up to Cat5e performance. Suitable for a broad range of applications with diverse product configurations.

Compact signal double lock connectors offer secondary locking in wire-to-wire and wire-to-board configurations.

Designed for soldering and pick-and-place equipment, this versatile product will help eliminate the cost of specialized equipment while allowing for quick design changes in a small, common footprint.

Surface mount antennas offer several frequency ranges for use in virtually any wireless device with a small form factor.

Accommodate Wi-Fi, Bluetooth, ZigBee and other frequency bands with broad product offering. Achieve rapid support with a range of readily available standard antennas.

IM Relays are the smallest signal relay offered by TE and are offered in a low profile package with through hole or surface mount terminals, ideal for applications with space constraints.

Signal relays have expanded well beyond the telecommunication applications for which they were initially designed. They can be found in programmable thermostats and other subsystems of HVAC and energy management equipment, as well as security, access control, fire detection and alarm systems.

Meets a broad range of power switching requirements. Maximum design flexibility with one or two pole configurations. Designed for harsh environments and long life cycles.

Main Features: different actuator lengths and styles, multiple actuation forces, sealed and u-sealed available, right-angle THT and SMT versions, bulk pack and T&R

Bifurcated gold wiping contact design no tape seal needed, standard .100 CL and ½ pitch .05 CL THT, and SMT termination Multiple actuator styles available, T&R and tube packaging standard.

Compact slide switch offering a sealed and unsealed version.

Our humidity sensors are designed to improve performance, reduce energy consumption, and increase safety in many environments where temperature affects performance.

TE offers a wide range of temperature measurement, control, and compensation sensing applications.

We design and manufacture pressure sensors ranging from the sensing element to system packaging for harsh environments.

We design and manufacture pressure sensors ranging from the sensing element to system packaging for harsh environments.

High pressure resolution combined with high PHT linearity makes the MS8607 an ideal candidate for environmental monitoring and altimeter in smart phones and tablet PC, as well as PHT applications such as HVAC and weather stations.

A trimmer resistor is a type of variable resistor or adjustable potentiometer that can adjust, tune, and calibrate circuits. It is meant to never be seen or adjusted by the device’s user.

Achieve easy mating and unmating with positive audible latch. Prevent post misalignment with polarization tabs.

A surface mount resistor is a tiny rectangular ceramic body with silver conductive edges on either end. They provide the same functionality as the more traditional axially leaded resistors but has a lower power dissipation capacity and oftentimes a lower stray inductance and capacity.

A snap action switch is a mechanical switch that sends a rapid transfer of contacts from one position to another. Also known as micro switches, snap action switches can be momentary or maintained contact and come in subminiature, miniature, and standard styles.

Eurostyle terminal blocks feature a rising cage clamp which promotes numerous reliable connections and disconnections at field installations.