Solutions for Overhead Power grid

TE's Avisphère helps prevent birds striking overhead lines. Its bi-colour and photo luminescent characteristics deter birds.

TE's Raychem raptor insulating covers have been successfully eliminating outages from all types of animals for many years. Designed to prevent raptor-caused outages on medium voltage distribution lines.

TE's Raychem dead end cover protects the connection points and suspension clamps of overhead lines from perching, landing and nesting birds.

TE's Raychem RRGS can fit both porcelain bells and polymeric insulators. It protects against bird streamer caused outages.

TE's Raychem fuse cutout cover prevents outages on polymer and porcelain fuse cutouts caused by birds and animals.

TE's Raychem insulating covers are designed to prevent bird-related outages on resclosures.

TE's Raychem bushing connection protection cover protects breaker, transformer and pole-top transformer bushings from animal caused outages.

TE's AMP provides a stud disconnect system allowing for safe maintenance operations.

TE's AMP EL connectors can be used in high voltage applications up to 500 kV. It can be used with solid and stranded aluminum, aluminum alloy and stranded aluminum composite conductors.

TE's AMP HTT operates on overhead lines at temperature up to 250°C. It seals the electrical contact area of the connectors. TE's AMP High Temperature connectors can be used on high temperature conductor like ACSS.

The TE's ILD-II is used for manual switching of circuits on overhead distribution lines. It comes in 15 kV, 29 kV, 35 kV,46 kV, 69 kV and can be used in a permanent or temporary application. A load break tool is required to break load up to 35 kV, 46 kV and 69kV are also available but are not design to break load.

TE's Bowthorpe EMP's polymeric surge arrester is housed with polymeric composite. It provides active over voltage protection and can be used in both indoor and outdoor applications.

TE's Bowthorpe EMP range of porcelain sub-station surge arresters are designed to protect systems up to 800 kV. Decades of design, development and manufacturing experience have been used to produce today’s HV metal oxide surge arresters and are tested to the current IEC60099-4: 2014 standard.

TE's TLA help improve the transmission line lightning performance by reducing the transient voltage across the insulators strings for levels below their flashover voltages.

TE's TLA help improve the transmission line lightning performance by reducing the transient voltage across the insulators strings for levels below their flashover voltages.

TE's IPC P3X/P4X are specifically designed for main to main connections in low voltage aerial bundled cables. It connects both aluminium and copper stranded conductors.

TE's IPC P2B/P2B Mk2 simultaneously connects, low voltage bare lines and low voltage aerial bundled lines. It combines a metallic plate on the top, and a piercing teeth technology at the bottom in order to insure good mechanical and electrical performance.

TE's EPB type connects bare aluminium and copper conductors to insulated lamp wires in street lighting applications. The design of the teeth avoids damages on the bare cables.

TE's PS type suspension clamp hangs low voltage insulated overhead lines from to 2 to 4 cables in self-supporting systems.

TE's USC hangs LV ABC self supporting system. Easy to install, it covers a wide range of sizes and can be installed with only a spanner.

TE's PA/EA clamp anchors low voltage insulated overhead lines with insulated neutral messenger. Its body can be either in plastic reinforced with fiberglass or in aluminium alloy die casted. Both materials are UV resistant.