RAST

AMP Duoplug 2.5

AMP DUOPLUG 2.5 connector system for wire-to-board applications

The AMP DUOPLUG 2.5 power connector system offers a complete printed circuit board system which is suitable for edge as well as female to header applications using the same female part. The top of the female contact is provided with an IDC slot, a technique which permits high speed wire termination. Application tooling specficially developed for this system can produce cable assemblies with connectors at one or both ends. The connector keying is produced with a cutting unit on the application tooling machine.

Product Features

  • Connector system for rationalised production
  • High production rate with no rejects
  • One-piece and two-piece connector system
  • Keyable female part
  • Contacts protected against damage
  • Controllable wire insertion
  • Wire strain relief provided by cover
  • Defined wire insertion depth 
  • Customer specific version of header
  • Protection provided by three side walls
  • Designed according to RAST 2.5 specification
  • VDE Tested acc. to: DIN VDE 40021724 and DIN EN 60998, Part 2–3

2A

Maximum current rating- 2.5mm centerline

2.5

mm centerline

1.5mm

PC board thickness

Applications

  • Household appliances
  • Consumer electronics
  • Telecommunication industry
  • Automotive industry
  • Vending machines 
  • Measuring devices and others
  • Specific silicone-IDC wires are applicable