This product is not currently available. For more information, including distributor inventory, please contact us.

Overview

Our Raychem RSTI Screened Separable Connectors feature a compact design to fit in tight installation spaces, are fully shielded, submersible and available with optional test points.
TE´s Raychem screened seperable T-connectors

Our Raychem RSTI Screened Separable Connectors are designed to connect single and three-core polymeric cables to medium voltage gas insulated switchgear and other equipment using bushings Type “C” (EN 50180/EN 50181), specified for 630/1250A up to 42 kV. Made of a highly modified silicone rubber and protected by a thin-walled outer conductive screen connected to the earth, these screened separable connectors are equally suited for indoor and outdoor installation. Supporting a wide application range, the design incorporates one body and two stress cone adapters to cover all cross-sections from 25 to 1000 mm². The overall and cut-back dimensions are designed to take up minimum space in the terminal box. These connectors are equipped with a capacitive test point for determining whether the circuit is energized. This test point is protected by a conductive cap. After cable preparation and lubrication, the stress control adapter is simply slid into place, followed by the screened connector body. These two components can be installed under virtually any conditions. A separable mounting system ensures easy installation of the connector onto the bushing. All kits include high-performance multi-range mechanical or DIN compression lugs matching the design of the screened separable connectors.

grey bare

Key Features

  • Range-taking connectors support a wide range of applications, cable types and sizes
  • Screened connector does not need to be removed for over sheath testing
  • Wide application range covers cable cross-sections from 35 to 1000 mm2
  • Easy access rear plug with capacitive test point
  • Insulation made of highly modified silicone rubber
grey bare
grey bare
  1. How to Install TE's Raychem RSTI (English)

Watch our video to learn more about how to install our Raychem RSTI Separable Connectors.

  • How to Install TE's Raychem RSTI-CC (English)

grey bare

FAQ

Frequently Asked Questions

Question: Does TE offer Screened Separable Connectors for cables up to 1000mm²?

Answer: Yes, our Raychem Screened Separable Connectors cover large cables cross-sections from 35 to 1000 mm² for both copper or aluminum conductors.

 

Question: Are the Screened Separable Connectors suitable for copper class 5 /flexible cables?
Answer: Yes, our Screened Separable Connectors include compression and shear bolt lugs that are compatible with flexible copper cables.

 

Question: Does TE offer test accessories?

Answer: Yes, we can offer test rods and earthing adapters.

 

Question: Which voltage range do Screened Separable Connectors cover?

Answer: Our Screened Separable Connectors are rated for 33 kV and 42 kV.

 

Question: Are the Screened Separable Connectors suitable for offshore environments?

Answer: Yes, our Screened Separable Connectors can be used in both onshore and offshore wind farm environments since they are made of modified silicone rubber which ensures high performance even under broad temperature changes, high humidity and salinity. Additionally, they have the DNV GL certification for marine and offshore applications.

 

Features

Please review product documents or contact us for the latest agency approval information.  

Product Type Features

  • Dead Break Connection Technology  Separable Connector

  • Dead Break Connection Connector Type  Crimp, Mechanical

  • Bushing Type  1250A, 630A

  • Cable Shield Style  Copper Tape, Copper Wire

  • Insulation  Polymeric

  • Screened  Yes

  • Product Family  RSTI

Configuration Features

  • Number of Cores  1, 3

Electrical Characteristics

  • Dead Break Connection Voltage Class (kV) ≤ 12, ≤ 24, ≤ 42

Body Features

  • Dead Break Connection Conductor Material  Aluminum, Aluminum/Copper, Copper

Dimensions

  • Dead Break Connection Conductor Diameter (mm) 5.2 – 6.5, 6.1 – 10.2, 6.1 – 12, 6.1 – 7.5, 7.2 – 8.6, 8.7 – 10.2, 10.3 – 12, 10.3 – 13.5, 10.3 – 16.8, 10.3 – 19.2, 11.6 – 13.5, 12.9 – 15, 12.9 – 19.2, 14.5 – 16.8, 14.5 – 21.6, 16.7 – 19.2, 16.7 – 24.6, 18.8 – 21.6, 21.2 – 24.6, 24 – 27.6, 24 – 32.5, 27.3 – 32.5, 30.9 – 32.1, 32.5 – 35

  • Dead Break Connection Insulation Diameter (mm) 12.7 – 23.4, 17 – 30.1, 21.2 – 34.6, 21.3 – 34.6, 22.4 – 35.5, 28.9 – 36.4, 28.9 – 42, 34 – 45.4, 39.1 – 59

  • Cross-Section Range (mm²) 25, 25 – 70, 25 – 95, 35, 35 – 70, 35 – 95, 50, 70, 95, 95 – 120, 95 – 150, 95 – 185, 95 – 240, 120, 120 – 240, 150, 150 – 240, 180 – 185, 185, 185 – 300, 240, 240 – 400, 300, 400, 500, 500 – 630, 630, 800

Operation/Application

  • Halogen Free  Yes

  • Marine-Offshore-Shipbuilding Certified  Yes

  • Free of Lead, Cadmium, Heavy Metals  Yes

  • Emission Free  Yes

  • Non-Toxic & Non-Corrosive Emission  Yes

  • Application Type  T-Connector

Industry Standards

  • Design Specification  GB/T 12706.4-2008, HD629.1-S2, HD629.1-S3

  • UL Rating  No

Product Availability

  • Dead Break Connection Product Availability  AMERICAS, ANZPAC, ASIA, EMEA

Other

  • Installation Instruction  Bulgarian, Croatian, Czech, Dutch, English, Estonian, Finnish, Flemish, French, German, Hebrew, Hungarian, Italian, Lithuanian, Norwegian, Polish, Romanian, Russian, Slovak, Slovenian, Spanish, Swedish

Reference Number

  • TE Internal Number CAT-RSTI

Related Materials

Terms and Conditions

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

Disclaimer:
This information has been provided to your free of charge for your use but remains the sole property of TE Connectivity Corporation (''TE'') or SnapEDA,  Inc. or Ultra Librarian/EMA Design Automation, Inc. (collectively, "Company"). While Company has used reasonable efforts to ensure its accuracy, Company does not guarantee that it is error-free, not makes any other representation, warranty, or guarantee that the information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by customers. Company expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular purpose.