This product is not currently available. For more information, including distributor inventory, please contact us.

Build and price the product now


External signal inputs can be accommodated with a variety of available Signal Conditioning Modules (SCMs).  All channels are measured simultaneously with each sampled at 16 bits, filtered, ranged, and calibration compensated at up to 42,500 samples/sec/channel by the built-in digital signal processor. The output range, filter frequency and calibration of each channel, as well as the PCM configuration, can be set by the user. A frame counter and CRC cyclic redundancy check can be included in each telemetry frame to allow dropped frames and data corruption to be detected.


Data Acquisition via External Inputs Data from external sensors and signals can be input to the 65210E via plug-in Signal Conditioning Modules. Modules are available for many standard transducer types and additional modules can be quickly developed to meet specific customer requirements.
User Programmable Settings - When configured as a 6 DoF, the output range and low-pass filter of each 65210E accelerometer and rate gyro axis can be set via a built-in RS-485 interface, as can the IRIG-106 encoded PCM output configuration. The carrier frequency for the optional built-in multi-channel S band transmitters can also be set by the user.
IRIG-106 Compatible - Calibrated, ranged, and filtered data can be streamed out at up to 3Mbit/sec via RS-485 or IRIG-106 encoded PCM.
High Accuracy and Linearity over Wide Temperature Range - Accelerometer accuracy is improved by minimizing variations due to temperature and aging effects. Each axial sensor has been tested over the -40 to +85°C temperature range.
Built-in Calibration - Calibration data for each sensor is maintained in the accelerometer. All digital data output is fully calibrated and in user specified engineering units.
Communication Integrity - A cyclic redundancy check (CRC) is available to validate communications. Telemetry also supports a frame counter to ease detection of missing frames.
Self-Test and fixed level outputs simplify installation and system check out by verification of channel integrity and ground station setup.
Small Cylindrical Package Package has a 2.75 inch diameter and 7.93 inch overall length. Optional spline mount parabolic mounting adapter available. The unit will fit in a standard MK-80 fuse well.
Built-In High Capacity, Fast-Charging Battery - Complete recharge in less than two hours provides up to three hours of operation with transmitter powered.
Suitable for Harsh Environments - The 65210E is robust and can be used in harsh environments. The unit will survive 100 g shock while powered.


Please review product documents or contact us for the latest agency approval information.  

Product Type Features

  • Sensor Type  Inertial Systems

Electrical Characteristics

  • Excitation Voltage (VDC) 8.5 – 36


  • Dimensions MM  Dia 69.85 x 201.42 Length

Packaging Features

  • Package  Anodized Aluminium


  • FS Range (±) DEG  1000, 1200, 20000

  • Operating Temperature DEGF  -40 – 185

  • Accuracy  ±0.1% Non-Linearity

  • Operating Temperature Range °C (°C) -40 – 85

Related Materials

Datasheets & Catalog Pages

Terms and Conditions

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to your free of charge for your use but remains the sole property of TE Connectivity Corporation (''TE'') or SnapEDA,  Inc. or Ultra Librarian/EMA Design Automation, Inc. (collectively, "Company"). While Company has used reasonable efforts to ensure its accuracy, Company does not guarantee that it is error-free, not makes any other representation, warranty, or guarantee that the information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by customers. Company expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular purpose.