In-Vehicle Technologies

A surface mount resistor is a tiny rectangular ceramic body with silver conductive edges on either end. They provide the same functionality as the more traditional axially leaded resistors but has a lower power dissipation capacity and oftentimes a lower stray inductance and capacity.

AMP+ HVP 800 high voltage connector system safely transports high currents and voltages through hybrid and electric vehicles.

A through-hole resistor is a fixed resistor that has long, pliable leads that can be stuck into a breadboard or hand- or wave-soldered into a printed circuit board. A through-hole resistor is used to reduce the flow of electrical current within a circuit. It’s commonly composed of carbon film, metal film, metal oxide film, thick film, or wirewound.

AMP+ HVA 280 high voltage terminals and connectors offer numerous design possibilities and routing flexibility.

A chassis mount resistor is designed to promote heat loss and cooling. This resistor is manufactured using wirewound resistor technology and features a ceramic core that is molded into an extruded aluminum chassis mount housing.

Based on the proven technology of TE’s EVC 250 contactor, the EVC 175 contactor features a continuous current of 175A and a short circuit capability of 5kA, meeting medium power requirements.

A potentiometer is a manually adjustable variable resistor that allows you to change and regulate the current flowing through a resistor.

Our EVC 250 main contactor is designed for use in hybrid, full-electric and fuel cell vehicles, on-board charging systems and works without pressurized contact chambers.

A trimmer resistor is a type of variable resistor or adjustable potentiometer that can adjust, tune, and calibrate circuits. It is meant to never be seen or adjusted by the device’s user.

Our compact EVC 135 contactors provide fast, reliable switching and custom connections for hybrid and electric vehicles.

Probe pads are incorporated in circuitry to avoid damage to sensitive tiny electronic circuits in surface mount devices. Probe pads enable safe probing of circuitry when adjusting, setting up, measuring, or repairing tiny electronic circuitry.

Our high voltage EVC 500 high contactors provide fast, reliable current switching for hybrid and electric vehicles.

Charging Inlet Type 2 is a modular system with interchangeable capabilities and virtually no impact on vehicle bodies.

Capable of allowing vehicle makers and system suppliers to fully harmonize functionality, TE's AMP+ charging inlet Type GB is a modular system that shares parts between charging inlets Type 1 and 2.

Charging inlet Type 1 is an interchangeable system for hybrid and electric vehicle applications in North America and Japan.

AMP+ auxiliary power terminal is a high voltage accessory/device interconnect for hybrid and electric vehicles.

AMP+ IPT shielded ring tongue provides 360-degree EMC shielding and wire-to-device capabilities.

Our power resistors offer reliable control of circuit current and voltage to protect your device.

Tactile switches provide tactile feedback to the user when the switch or button makes contact with the control panel underneath, which is usually a printed circuit board.

A DIP switch is a manual electronic package that is composed of a series of tiny switches. It has a rectangular casing and two parallel rows of connecting terminals. A SIP switch is a computer chip package that has a single row of connection pins.

A snap action switch is a mechanical switch that sends a rapid transfer of contacts from one position to another. Also known as micro switches, snap action switches can be momentary or maintained contact and come in subminiature, miniature, and standard styles.