Contact us to request more information about this model, including customization options

Contact Us
Overview

The FDS is capable of operating up to eight miniature 16, 32 or 64 channel pressure scanners, equipped with Digital Temperature Compensation (DTC).  The FDS will perform all pressure data acquisition duties and calculate engineering unit conversions internally while transmitting temperature corrected pressure data back to the host over an UDP or TCP/IP Ethernet connection in-flight. The FDS utilizes calibration data stored on-board the ESP Scanners to correct for non-linearity and thermal shifts while an on-line re-zero corrects for any zero drift of the sensors. The FDS supports all DTC Scanner functions including programmable deranging capability, sensor temperature readouts, and internal calibration valve shift control and position detection when equipped within the scanner. “Live @ Power up” mode uses stored scanner configurations to greatly reduce
initialization times and automatically return to data acquisition mode, perfect for unintended power cycle events. Communication is via TCP/IP protocol for configuration while acquired data is transmitted via UDP Multicast direct to the user’s data recording hardware or Host Group (IGMP).

BENEFITS

  • Live @ Power up Data Acquisition
  • Auto Re-zero via switch closure
  • Digital Temperature Compensation
  • Hardware Pre-configuration Settings 
  • Automatic UDP Transmission of Data Packets
  • Reduction in Zero Drift
  • Reduction in temperature induced errors
  • Reduction in startup time following power cycle
Features

Please review product documents or contact us for the latest agency approval information.  

Product Type Features

  • Sensor Type  Data Acquisition Systems

Other

  • Media  Voltage

  • EU Throughput Rate HZ  650

  • Enclosure  IP64

  • Number of Channels  512

Related Materials

Terms and Conditions

Please carefully read the disclaimer before using any of this data.
Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

Disclaimer:
This information has been provided to you free of charge for your use but remains the sole property of TE Connectivity Corporation ("TE"). While TE has used reasonable efforts to ensure its accuracy, TE does not guarantee that it is error-free, nor makes any other representation, warranty, or guarantee that the information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by customers. TE expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular purpose.