This transducer is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam and corrosive fluids. The transducer pressure cavity is constructed of 316L stainless steel and there are no internal o-rings or organics exposed to the pressure media. Having excellent durability, it is available with a variety of leak-proof, all metal pressure connections. The U7100 is an automotive grade pressure transducer with hermetic pressure ports and an integral electrical connector with standard pressure ranges from 0 to 15, up to 150psi (10Bar). This pressure sensor exceeds the latest industrial CE requirements and includes automotive electronics requirements such as surge protection, as well as being overvoltage protected to 16Vdc in both positive and reverse polarity.
Performance standard for on and off highway engine & vehicle OEMs
Rugged for heavy equipment and outdoor use such as HVAC refrigeration systems
Designed specifically for high volume applications
Stainless steel wetted surfaces
Low pressure ranges
Gage, absolute, sealed gage
Hermetic Pressure Ports
Integral Electrical Connector
Survives High Vibration
Water Resistant 1M Immersion
Please review product documents or contact us for the latest agency approval information.
Product Type Features
Sensor Type Industrial Pressure Transducers
Type Absolute, Compound, Gage, Sealed
Supply Voltage (V)4.75 – 5.25
Electrical Connection Amp, Cable 1 m, Cable 10 ft, Cable 10 m, Cable 2 ft, Cable 2 m, Cable 4 ft, Cable 5 m, M12, Packard, Sumitomo
Port Material 316L
Pressure Port/Fitting 1/4 Flare Gasket, 1/4 MNPT, 1/8 MNPT, 7/16-20 UNF Female with Integral Valve, 7/16-20 UNF Male Buna-N, G1/4 BS5380 Female, G1/4 BS5380 Male, G1/4 DIN3852 Gasket Male, M10x1 Male, M12x1.5 Male, M14x1.5 Male, R1/4 Male
Dimensions26.7 x 26.7 x 50 mm [ 1.05 x 1.05 x 1.97 in ]
Please carefully read the disclaimer before using any of this data.
Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.
This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation ("TE"). While TE has used reasonable efforts to ensure its accuracy, TE does not guarantee that it is error-free, nor makes any other representation, warranty, or guarantee that the information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by customers. TE expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular purpose.