Our website has detected that you are using an unsupported browser that will prevent you from accessing certain features.
We strongly recommend that you upgrade to the most recent version of your browser.
Please review product documents or contact us for the latest agency approval information.
Please Note: Use the Product Drawing for all design activity.
Product Type Features
Connector & Contact Terminates To Wire & Cable
With Insulation Support Yes
Applied Pressure Intermediate
Wire/Cable Type Discrete Wire
Product Type Contact
Termination Resistance 12 mΩ
Insulation Resistance (MΩ)5000
Dielectric Withstanding Voltage (V)750
Operating Voltage (VAC)250
Contact Type Socket
Contact Current Rating (Max) (A)3
Contact Mating Area Plating Material Tin
Contact Base Material Beryllium Copper
Contact Transmits (Typical) Signal (Data)/Power
Contact Mating Area Plating Thickness (µin)78 – 158
Crimp Area Plating Thickness (µin)78 – 158
Termination Method to Wire/Cable Crimp
Crimp Area Plating Material Nickel, Tin
Wire/Cable Size (AWG)24 – 20
Wire/Cable Size (mm²).2 – .6
Insulation Diameter1.75 mm [ .069 in ]
Operating Temperature Range (°C)-65 – 105
Approved Standards CSA LR7189, UL E28476
Packaging Method Loose Piece
Packaging Quantity 1000
Comment (*) For use with Model "K" machines. Call the Technical Assistance Center (1-800-522-6752) for part numbers of applicators for use with Model "G" machines, as well as other bench machines and fully automatic AMPOMATOR lead making machines.
Please carefully read the disclaimer before using any of this data.
Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.
This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation ("TE"). While TE has used reasonable efforts to ensure its accuracy, TE does not guarantee that it is error-free, nor makes any other representation, warranty, or guarantee that the information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by customers. TE expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular purpose.