Our website has detected that you are using an unsupported browser that will prevent you from accessing certain features.
We strongly recommend that you upgrade to the most recent version of your browser.
Please review product documents or contact us for the latest agency approval information.
Please Note: Use the Product Drawing for all design activity.
Product Type Features
Header Type Universal Ejection Pin Headers
Connector System Wire-to-Board
PCB Mounting Orientation Vertical
Row-to-Row Spacing2.54 mm [ .1 in ]
Connector Style Plug
Connector & Contact Terminates To Printed Circuit Board
Connector Type Header
Board Standoff Without
Product Type Connector
Number of Positions 14
Number of Rows 2
Ejection Latches Without
Operating Voltage (VAC)250
Insulation Resistance (MΩ)1000 – 5000
Post Size.64 mm [ .025 in ]
Solder Tail Contact Plating Material Tin over Nickel
Contact Current Rating (Max) (A)1
Contact Mating Area Plating Material Gold Flash over Palladium Nickel, Gold
Contact Type Pin
Contact Termination Area Plating Thickness2.54 µm [ 100 µin ]
Contact Base Material Phosphor Bronze
Contact Shape Square
Contact Transmits (Typical) Signal (Data)
Contact Termination Area Plating Material Tin
Contact Mating Area Plating Thickness (µin)30
Termination Method to PC Board Through Hole
Termination Post Length2.79 mm [ .11 in ]
Panel Mount Retention Without
PCB Mount Alignment Without
PCB Mount Retention Without
Mating Alignment Type Center, Dual Polarizing Bar
Mating Connector Lock Without
Mating Connector Lock Type Ejection Latch
Mating Alignment With
Mating Retention With
Centerline (Pitch)2.54 mm [ .1 in ]
Housing Entry Style Top
Housing Material Nylon - GF
Housing Color Black
Housing Style 4-Sided
Shrouded End Dimension3.81 mm [ .15 in ]
PCB Thickness (Recommended)1.57 mm [ .062 in ]
Height13.94 mm [ .55 in ]
Length37.08 mm [ 1.46 in ]
Operating Temperature Range (°C)-65 – 105
Temperature Rating High
For Use With AMP-Latch Receptacle
UL Flammability Rating UL 94V-0
Packaging Method Tray
Packaging Quantity 80
Comment Pin headers in 10- and 14-position sizes have only one slot for snap-in polarizer (military polarization), located as shown., Pin headers in 10-position size have only slot for dual polarization, located as shown.
Please carefully read the disclaimer before using any of this data.
Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.
This information has been provided to you free of charge for your use but remains the sole property of TE Connectivity Corporation ("TE"). While TE has used reasonable efforts to ensure its accuracy, TE does not guarantee that it is error-free, nor makes any other representation, warranty, or guarantee that the information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by customers. TE expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular purpose.