Our website has detected that you are using an unsupported browser that will prevent you from accessing certain features.
We strongly recommend that you upgrade to the most recent version of your browser.
Please review product documents or contact us for the latest agency approval information.
Please Note: Use the Product Drawing for all design activity.
Product Type Features
Connector & Contact Terminates To Printed Circuit Board
PCB Mounting Orientation Vertical
With Insulation Support No
Product Type Contact
Contact Resistance (mΩ)12
Dielectric Withstanding Voltage 1200 VAC
Insulation Resistance (MΩ)5000
Solder Tail Contact Plating Material Gold
Contact Type Post
Contact Mating Area Plating Material Gold
Contact Current Rating (Max) (A)5
Contact Mating Area Length9.65 mm [ .38 in ]
Contact Base Material Brass
Contact Mating Area Plating Thickness (µin)30
Termination End Plating Thickness (µin)30
Termination End Plating Material Gold Over Nickel
Termination Post Length8.13 mm [ .32 in ]
Hole Size (Recommended)1.98 mm [ .078 in ]
Mating Post Length20.32 mm [ .8 in ]
Operating Temperature Range (°C)-65 – 105
Packaging Method Strip
Packaging Quantity 20000
Comment Minimum nominal centerline spacing between adjacent contacts is .125., Post center may vary depending on requirements., Strip form posts applied with Insertion Machine Number 3-457382-1, includes power unit and applicator.
Please carefully read the disclaimer before using any of this data.
Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.
This information has been provided to you free of charge for your use but remains the sole property of TE Connectivity Corporation ("TE"). While TE has used reasonable efforts to ensure its accuracy, TE does not guarantee that it is error-free, nor makes any other representation, warranty, or guarantee that the information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by customers. TE expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular purpose.