SSRT-240A25 Power Relays  1
  • Power Relay Type Solid State
  • Output Type AC
  • Output Switching Zero
  • Output Voltage (Max) 280
  • Insulation Initial Dielectric Between Contacts & Coil 4000
  • Output Current (Min) .1
  • Insulation Initial Dielectric Between Adjacent Contacts 4000
  • Output Current Rating .1 – 10
  • Output Voltage Rating (AC Relays) 24 – 280
  • Input Voltage 90 – 280
  • Input Voltage Typical 90 – 280
  • Case Color Black
  • Weight 98
  • Contact Arrangement 1 Form A (SPST-NO)
  • Contact Current Rating (Max) 10
  • Switch Arrangement 1 Form A (SPST-NO)
  • Relay Termination Type Screws
  • Relay Mounting Type Chassis Mount
  • Coupling Optical
  • Housing Style Hockey Puck
  • Dimensions (L x W x H) (Approximate) 45 x 57.8 x 36.5
  • Operating Temperature Range -30 – 80
  • R-Switch & slimSSR Relays No
SSRT-240D10 Power Relays  1
  • Power Relay Type Solid State
  • Output Type AC
  • Output Switching Zero
  • Input Voltage 3 – 32
  • Output Voltage (Max) 280
  • Insulation Initial Dielectric Between Contacts & Coil 4000
  • Output Current (Min) .1
  • Insulation Initial Dielectric Between Adjacent Contacts 4000
  • Output Current Rating .1 – 10
  • Output Voltage Rating (AC Relays) 24 – 280
  • Input Voltage Typical 3 – 32
  • Case Color Black
  • Weight 98
  • Contact Arrangement 1 Form A (SPST-NO)
  • Contact Current Rating (Max) 10
  • Switch Arrangement 1 Form A (SPST-NO)
  • Relay Termination Type Screws
  • Relay Mounting Type Chassis Mount
  • Coupling Optical
  • Housing Style Hockey Puck
  • Dimensions (L x W x H) (Approximate) 45 x 57.8 x 36.5
  • Operating Temperature Range -30 – 80
  • R-Switch & slimSSR Relays No
1055688-1 RF Connectors
  • Connector Interface SSMT
  • Connector Style Plug
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single
  • Number of Positions 1
  • PCB Mount Orientation Vertical
  • Number of Coaxial Contacts 1
  • Impedance 50
  • Body Material Polyphenylene Sulfide (PPS)
  • Body Finish Plated
  • Body Plating Material Gold
  • Center Contact Plating Material Gold over Nickel
  • Center Contact Material Copper Alloy
  • PCB Termination Method Surface Mount
  • Coupling Mechanism Snap-On
  • Connector Mounting Type Board Mount
  • Detent Without
  • Mated Outer Diameter (Approximate) 2.6
  • Height above PCB 2.06
  • Operating Temperature Range -40 – 125
  • Operating Frequency 6
  • Packaging Method Tape & Reel
  • Packaging Quantity 800
  • Cable Entry Multi-Directional
  • Comment Requires part number 1221286-1 Engagement/Disengagement Tool.
1055689-1 RF Connectors
  • Connector Interface SSMT
  • Connector Style Plug
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single
  • Number of Positions 1
  • PCB Mount Orientation Vertical
  • Number of Coaxial Contacts 1
  • Impedance 50
  • Body Material Polyphenylene Sulfide (PPS)
  • Body Finish Plated
  • Body Plating Material Gold
  • Center Contact Plating Material Gold over Nickel
  • Center Contact Material Copper Alloy
  • PCB Termination Method Surface Mount
  • Coupling Mechanism Snap-On
  • Connector Mounting Type Board Mount
  • Detent Without
  • Mated Outer Diameter (Approximate) 2.6
  • Height above PCB 2.06
  • Operating Temperature Range -40 – 125
  • Operating Frequency 6
  • Packaging Method Reel
  • Packaging Quantity 3000
  • Cable Entry Multi-Directional
  • Comment Requires part number 1221286-1 Engagement/Disengagement Tool.
1055687-1 RF Connectors
  • Connector Interface SSMT
  • Connector Style Plug
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single
  • Number of Positions 1
  • PCB Mount Orientation Vertical
  • Number of Coaxial Contacts 1
  • Impedance 50
  • Body Material Polyphenylene Sulfide (PPS)
  • Body Finish Plated
  • Body Plating Material Gold
  • Center Contact Plating Material Gold over Nickel
  • Center Contact Material Copper Alloy
  • PCB Termination Method Surface Mount
  • Coupling Mechanism Snap-On
  • Connector Mounting Type Board Mount
  • Detent Without
  • Mated Outer Diameter (Approximate) 2.6
  • Height above PCB 2.06
  • Operating Temperature Range -40 – 125
  • Operating Frequency 6
  • Packaging Method Bag
  • Cable Entry Multi-Directional
  • Comment Requires part number 1221286-1 Engagement/Disengagement Tool.
1055690-1 RF Connectors
  • Connector Interface SSMT
  • Connector Style Plug
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single
  • Number of Positions 1
  • PCB Mount Orientation Vertical
  • Number of Coaxial Contacts 1
  • Impedance 50
  • Body Material Polyphenylene Sulfide (PPS)
  • Body Finish Plated
  • Body Plating Material Gold
  • Center Contact Plating Material Gold over Nickel
  • Center Contact Material Copper Alloy
  • PCB Termination Method Surface Mount
  • Coupling Mechanism Snap-On
  • Connector Mounting Type Board Mount
  • Detent Without
  • Mated Outer Diameter (Approximate) 2.6
  • Height above PCB 3
  • Operating Temperature Range -40 – 125
  • Operating Frequency 6
  • Packaging Method Bag
  • Cable Entry Slotted Single Direction
  • Comment No engagement tool required.
SGRT-3-06 Rings & Spades
  • Sealable No
  • Barrel Type Closed Barrel
  • Wire/Cable Type Regular Wire
  • Insulated Yes
  • Insulated Wire Support Yes
  • Support Style Insulation Support
  • Stud Size M6
  • Shape Code RING-088
  • Barrel Style Standard
  • Wire/Cable Composition Stranded
  • Number of Holes 1
  • Terminal Angle Straight
  • Current Rating 33
  • Plating Material Copper
  • Insulation Material Heat Shrink Polyvinylidene Fluoride
  • Insulation Sleeve Material Heat Shrink Polyvinylidene Fluoride
  • Insulation Sleeve Color Blue
  • Inspection Slot No
  • Terminal Type Ring Tongue
  • Terminal Orientation Straight
  • Stud Diameter 6.5
  • Wire Size 13 – 9
  • Wire Size 2.5 – 6.6
  • Wire Insulation Diameter (Max) 6.5
  • Wire Size 5000 – 13200
  • Barrel Inside Diameter 9.9822
  • Overall Length 47.2
  • Operating Temperature Range -55 – 150
  • Heavy Duty No
  • Government Qualified No
  • Packaging Method Box
  • Packaging Quantity 100
  • Comment Prefluxed solder preform provides controlled soldering.
  • Barrel Color Clear
SSRT-240A10 Power Relays  1
  • Power Relay Type Solid State
  • Output Type AC
  • Output Switching Zero
  • Output Voltage (Max) 280
  • Insulation Initial Dielectric Between Contacts & Coil 4000
  • Output Current (Min) .1
  • Insulation Initial Dielectric Between Adjacent Contacts 4000
  • Output Current Rating .1 – 25
  • Output Voltage Rating (AC Relays) 24 – 280
  • Input Voltage 90 – 280
  • Input Voltage Typical 90 – 280
  • Case Color Black
  • Weight 98
  • Contact Arrangement 1 Form A (SPST-NO)
  • Contact Current Rating (Max) 25
  • Switch Arrangement 1 Form A (SPST-NO)
  • Relay Termination Type Screws
  • Relay Mounting Type Chassis Mount
  • Coupling Optical
  • Housing Style Hockey Puck
  • Dimensions (L x W x H) (Approximate) 45 x 57.8 x 36.5
  • Operating Temperature Range -30 – 80
  • R-Switch & slimSSR Relays No
SSRT-240D25 Power Relays  1
  • Power Relay Type Solid State
  • Output Type AC
  • Output Switching Zero
  • Input Voltage 3 – 32
  • Output Voltage (Max) 280
  • Insulation Initial Dielectric Between Contacts & Coil 4000
  • Output Current (Min) .1
  • Insulation Initial Dielectric Between Adjacent Contacts 4000
  • Output Current Rating .1 – 25
  • Output Voltage Rating (AC Relays) 24 – 280
  • Input Voltage Typical 3 – 32
  • Case Color Black
  • Weight 98
  • Contact Arrangement 1 Form A (SPST-NO)
  • Contact Current Rating (Max) 25
  • Switch Arrangement 1 Form A (SPST-NO)
  • Relay Termination Type Screws
  • Relay Mounting Type Chassis Mount
  • Coupling Optical
  • Housing Style Hockey Puck
  • Dimensions (L x W x H) (Approximate) 45 x 57.8 x 36.5
  • Operating Temperature Range -30 – 80
  • R-Switch & slimSSR Relays No
SGRT-2-04 Rings & Spades
  • Sealable No
  • Barrel Type Closed Barrel
  • Wire/Cable Type Regular Wire
  • Insulated Yes
  • Insulated Wire Support Yes
  • Support Style Insulation Support
  • Stud Size #8
  • Shape Code RING-088
  • Barrel Style Standard
  • Wire/Cable Composition Stranded
  • Number of Holes 1
  • Terminal Angle Straight
  • Current Rating 15
  • Plating Material Copper
  • Insulation Material Heat Shrink Polyvinylidene Fluoride
  • Insulation Sleeve Material Heat Shrink Polyvinylidene Fluoride
  • Insulation Sleeve Color Blue
  • Weight per Piece 1
  • Inspection Slot No
  • Terminal Type Ring Tongue
  • Terminal Orientation Straight
  • Stud Diameter 4.3
  • Wire Size 16 – 12
  • Wire Size 1.25 – 3
  • Wire Insulation Diameter (Max) 5
  • Wire Size 2400 – 6000
  • Barrel Inside Diameter 7.4
  • Overall Length 38.1
  • Barrel Inside Diameter (Min) 3.9
  • Operating Temperature Range -55 – 150
  • Heavy Duty No
  • Government Qualified No
  • Packaging Method Box
  • Packaging Quantity 100
  • Comment Prefluxed solder preform provides controlled soldering.
  • Barrel Color Blue
SGRT-2-05 Rings & Spades
  • Sealable No
  • Barrel Type Closed Barrel
  • Wire/Cable Type Regular Wire
  • Insulated Yes
  • Insulated Wire Support Yes
  • Support Style Insulation Support
  • Stud Size #10
  • Shape Code RING-088
  • Barrel Style Standard
  • Wire/Cable Composition Stranded
  • Number of Holes 1
  • Terminal Angle Straight
  • Current Rating 15
  • Plating Material Copper
  • Insulation Material Heat Shrink Polyvinylidene Fluoride
  • Insulation Sleeve Material Heat Shrink Polyvinylidene Fluoride
  • Insulation Sleeve Color Blue
  • Inspection Slot No
  • Terminal Type Ring Tongue
  • Terminal Orientation Straight
  • Stud Diameter 5.5
  • Wire Size 16 – 12
  • Wire Size 1.25 – 3
  • Wire Insulation Diameter (Max) 5
  • Wire Size 2400 – 6000
  • Barrel Inside Diameter 7.3914
  • Overall Length 38.1
  • Operating Temperature Range -55 – 150
  • Heavy Duty No
  • Government Qualified No
  • Packaging Method Box & Carton
  • Packaging Quantity 100
  • Comment Prefluxed solder preform provides controlled soldering.
  • Barrel Color Clear
1055692-1 RF Connectors
  • Connector Interface SSMT
  • Connector Style Plug
  • Connector System Cable-to-Cable
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single
  • Number of Positions 1
  • PCB Mount Orientation Vertical
  • Number of Coaxial Contacts 1
  • Impedance 50
  • Body Material Polyphenylene Sulfide (PPS)
  • Body Finish Plated
  • Body Plating Material Gold
  • Center Contact Plating Material Gold over Nickel
  • Center Contact Material Copper Alloy
  • PCB Termination Method Surface Mount
  • Coupling Mechanism Snap-On
  • Connector Mounting Type Board Mount
  • Detent Without
  • Height above PCB 3
  • Operating Temperature Range -40 – 125
  • Operating Frequency 6
  • Packaging Method Tape & Reel
  • Packaging Quantity 2500
  • Cable Entry Slotted Single Direction
  • Comment No engagement tool required.
1064535-1 RF Cable Assemblies
  • Connector Type (End A) SSMT Right Angle Jack
  • Cable Assembly Type Jack Cable Pigtail
  • Dielectric Material Polypropylene
  • Product Type Cable Assembly
  • Shielded Yes
  • Number of Connectorized Ends 1
  • Connector Impedance 50
  • Impedance 50
  • Insulation Resistance 1000
  • Voltage 250 VAC
  • Frequency DC – 6
  • Jacket Material FEP Fluorocarbon
  • Color Blue
  • Conductor Material Copper Clad Steel
  • Shield Material Copper Wire
  • Body Plating Gold over Nickel
  • Shield Plating Material Silver
  • Contact Base Material Beryllium Copper
  • Contact Mating Area Plating Material Gold
  • Mating Diameter 2.5
  • Mated Height 2.1
  • Wire Size 30
  • Overall Outside Cable Diameter 1.32
  • Wire Size .0509
  • Conductor Size 30
  • Wire Size 100.5
  • Operating Temperature Range -40 – 125
  • Cable Assembly Length .1
1254242-1 RF Connectors  1
  • Connector Interface SSMT
  • Connector Style Plug
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Port Configuration Single
  • Number of Positions 1
  • PCB Mount Orientation Vertical
  • Number of Coaxial Contacts 1
  • Impedance 50
  • Body Material Polyphenylene Sulfide (PPS)
  • Body Plating Material Gold
  • Center Contact Plating Material Gold over Nickel
  • Center Contact Material Copper Alloy
  • Wire & Cable Termination Method Solder
  • PCB Termination Method Surface Mount
  • Coupling Mechanism Push On
  • Connector Mounting Type Board Mount
  • Captivation Method Mechanical
  • Detent Without
  • Height above PCB 2.99
  • PCB Tail Length .381
  • Operating Temperature Range -40 – 125
  • Operating Frequency 6
  • Packaging Method Tape & Reel
  • Packaging Quantity 600
  • Cable Entry Slotted Single Direction
  • Comment No engagement tool required.
SGRT-2-03 Rings & Spades
  • Sealable No
  • Barrel Type Closed Barrel
  • Wire/Cable Type Regular Wire
  • Insulated Yes
  • Insulated Wire Support Yes
  • Support Style Insulation Support
  • Stud Size #6
  • Shape Code RING-088
  • Barrel Style Standard
  • Wire/Cable Composition Stranded
  • Number of Holes 1
  • Terminal Angle Straight
  • Current Rating 15
  • Plating Material Copper
  • Insulation Material Heat Shrink Polyvinylidene Fluoride
  • Insulation Sleeve Material Heat Shrink Polyvinylidene Fluoride
  • Insulation Sleeve Color Blue
  • Weight per Piece 1
  • Inspection Slot No
  • Terminal Type Ring Tongue
  • Terminal Orientation Straight
  • Stud Diameter 3.8
  • Wire Size 16 – 12
  • Wire Size 1.25 – 3
  • Wire Insulation Diameter (Max) 5
  • Wire Size 2400 – 6000
  • Barrel Inside Diameter 7.3914
  • Overall Length 38.1
  • Operating Temperature Range -55 – 150
  • Heavy Duty No
  • Government Qualified No
  • Packaging Method Box
  • Packaging Quantity 100
  • Comment Prefluxed solder preform provides controlled soldering.
  • Barrel Color Clear
SGRT-2-06 Rings & Spades
  • Sealable No
  • Barrel Type Closed Barrel
  • Wire/Cable Type Regular Wire
  • Insulated Yes
  • Insulated Wire Support Yes
  • Support Style Insulation Support
  • Stud Size M6
  • Shape Code RING-088
  • Barrel Style Standard
  • Wire/Cable Composition Stranded
  • Number of Holes 1
  • Terminal Angle Straight
  • Current Rating 15
  • Plating Material Copper
  • Insulation Material Heat Shrink Polyvinylidene Fluoride
  • Insulation Sleeve Material Heat Shrink Polyvinylidene Fluoride
  • Insulation Sleeve Color Blue
  • Weight per Piece 1
  • Inspection Slot No
  • Terminal Type Ring Tongue
  • Terminal Orientation Straight
  • Stud Diameter 6.5
  • Wire Size 16 – 12
  • Wire Size 1.25 – 3
  • Wire Insulation Diameter (Max) 5
  • Wire Size 2400 – 6000
  • Barrel Inside Diameter 7.3914
  • Overall Length 40.5
  • Operating Temperature Range -55 – 150
  • Heavy Duty No
  • Government Qualified No
  • Packaging Method Box
  • Packaging Quantity 100
  • Comment Prefluxed solder preform provides controlled soldering.
  • Barrel Color Clear
SGRT-4-06 Rings & Spades
  • Sealable No
  • Barrel Type Closed Barrel
  • Wire/Cable Type Regular Wire
  • Insulated Yes
  • Insulated Wire Support Yes
  • Support Style Insulation Support
  • Stud Size M6
  • Shape Code RING-088
  • Barrel Style Standard
  • Wire/Cable Composition Stranded
  • Number of Holes 1
  • Terminal Angle Straight
  • Current Rating 56
  • Plating Material Copper
  • Insulation Material Heat Shrink Polyvinylidene Fluoride
  • Insulation Sleeve Material Heat Shrink Polyvinylidene Fluoride
  • Insulation Sleeve Color Blue
  • Weight per Piece 1
  • Inspection Slot No
  • Terminal Type Ring Tongue
  • Terminal Orientation Straight
  • Stud Diameter 6.5
  • Wire Size 10 – 7
  • Wire Size 6 – 11.2
  • Wire Insulation Diameter (Max) 9
  • Wire Size 12000 – 22400
  • Barrel Inside Diameter 11.7856
  • Overall Length 47.4
  • Operating Temperature Range -55 – 150
  • Heavy Duty No
  • Government Qualified No
  • Packaging Method Box
  • Packaging Quantity 100
  • Comment Prefluxed solder preform provides controlled soldering.
  • Barrel Color Clear
SGRT-4-08 Rings & Spades
  • Sealable No
  • Barrel Type Closed Barrel
  • Wire/Cable Type Regular Wire
  • Insulated Yes
  • Insulated Wire Support Yes
  • Support Style Insulation Support
  • Stud Size 5/16
  • Shape Code RING-088
  • Barrel Style Standard
  • Wire/Cable Composition Stranded
  • Number of Holes 1
  • Terminal Angle Straight
  • Current Rating 56
  • Plating Material Copper
  • Insulation Material Heat Shrink Polyvinylidene Fluoride
  • Insulation Sleeve Material Heat Shrink Polyvinylidene Fluoride
  • Insulation Sleeve Color Blue
  • Weight per Piece 1
  • Inspection Slot No
  • Terminal Type Ring Tongue
  • Terminal Orientation Straight
  • Stud Diameter 8.4
  • Wire Size 10 – 7
  • Wire Size 6 – 11.2
  • Wire Insulation Diameter (Max) 9
  • Wire Size 12000 – 22400
  • Barrel Inside Diameter 11.7856
  • Overall Length 51
  • Operating Temperature Range -55 – 150
  • Heavy Duty No
  • Government Qualified No
  • Packaging Method Box
  • Packaging Quantity 100
  • Comment Prefluxed solder preform provides controlled soldering.
  • Barrel Color Clear