2127934-4 Pluggable I/O Cable Assemblies
  • Cable Assembly Category High Speed
  • Cable Assembly Type Small Form Factor Pluggable (SFP)
  • Shielded Yes
  • Connector Type (End A) SFP+
  • Connector Type (End B) SFP+
  • Cable Style Madison TurboTwin - Round Jacketed
  • Product Designation Patch Cord
  • Product Type Cable Assembly
  • Latching Style Retractable Pin
  • Number of Positions 2-Pair
  • Number of Power Positions 0
  • Number of Signal Positions 4
  • Keyed No
  • Configuration Double-Ended
  • Impedance 100
  • Data Rate 10
  • Jacket Material Flexible PVC
  • Equalized No
  • Color Black
  • Shield Material Aluminum/Polyester/Aluminum Tape/Tin-Plated Copper Braid
  • Strain Relief Type Overmold
  • Release Type Pull Tab
  • Contact Mating Area Plating Material Gold
  • Jackscrew Without
  • Housing Material Zinc Alloy
  • Wire Size 24
  • Wire Size .205
  • Overall Outside Cable Diameter 6.48 mm
  • Flammability Rating CL2
  • IEEE 1394 No
  • Cable Assembly Length 3
  • CLOUDSPLITTER No
2127931-3 Pluggable I/O Cable Assemblies
  • Cable Assembly Category High Speed
  • Cable Assembly Type Small Form Factor Pluggable (SFP)
  • Shielded Yes
  • Connector Type (End A) SFP+
  • Connector Type (End B) SFP+
  • Cable Style Madison TurboTwin - Round Jacketed
  • Product Designation Patch Cord
  • Product Type Cable Assembly
  • Latching Style Retractable Pin
  • Number of Positions 2-Pair
  • Number of Power Positions 0
  • Number of Signal Positions 4
  • Keyed No
  • Configuration Double-Ended
  • Impedance 100
  • Data Rate 10
  • Jacket Material Flexible PVC
  • Equalized No
  • Color Black
  • Shield Material Aluminum/Polyester/Aluminum Tape/Tin-Plated Copper Braid
  • Strain Relief Type Overmold
  • Release Type Pull Tab
  • Contact Mating Area Plating Material Gold
  • Jackscrew Without
  • Housing Material Zinc Alloy
  • Wire Size 30
  • Wire Size .051
  • Overall Outside Cable Diameter 4.37 mm
  • Flammability Rating CL2
  • IEEE 1394 No
  • Cable Assembly Length 2
  • CLOUDSPLITTER No
2127933-6 Pluggable I/O Cable Assemblies
  • Cable Assembly Category High Speed
  • Cable Assembly Type Small Form Factor Pluggable (SFP)
  • Shielded Yes
  • Connector Type (End A) SFP+
  • Connector Type (End B) SFP+
  • Cable Style Madison TurboTwin - Round Jacketed
  • Product Designation Patch Cord
  • Product Type Cable Assembly
  • Latching Style Retractable Pin
  • Number of Positions 2-Pair
  • Number of Power Positions 0
  • Number of Signal Positions 4
  • Keyed No
  • Configuration Double-Ended
  • Impedance 100
  • Data Rate 10
  • Jacket Material Flexible PVC
  • Equalized No
  • Color Black
  • Shield Material Aluminum/Polyester/Aluminum Tape/Tin-Plated Copper Braid
  • Strain Relief Type Overmold
  • Release Type Pull Tab
  • Contact Mating Area Plating Material Gold
  • Jackscrew Without
  • Housing Material Zinc Alloy
  • Wire Size 26
  • Wire Size .129
  • Overall Outside Cable Diameter 5.21 mm
  • Flammability Rating CL2
  • IEEE 1394 No
  • Cable Assembly Length 5
  • CLOUDSPLITTER No
2110742-1 SFP/SFP+/zSFP+
  • Form Factor SFP+
  • Product Type Cage Assembly
  • Cage Type Ganged
  • Included Heat Sink No
  • Integrated Lightpipes No
  • Port Matrix Configuration 1 x 6
  • Lightpipe Configuration Dual Round
  • Lightpipe Profile Low
  • Number of Ports 6
  • Data Rate (Max) 16
  • PCB Termination Method Through Hole - Press-Fit
  • Cage Material Nickel Silver
  • Tail Length 2.05
  • PCB Thickness (Recommended) 2.25
  • Heat Sink Compatible No
  • For Use With SFP+ SMT Connector
  • UL Flammability Rating UL 94V-0
  • Packaging Method Box & Tray
  • EMI Containment External Springs
  • Included Lightpipe Yes
2007169-1 SFP/SFP+/zSFP+
  • Form Factor SFP+
  • Product Type Cage Assembly
  • Cage Type Ganged
  • Included Heat Sink No
  • Integrated Lightpipes No
  • Port Matrix Configuration 1 x 6
  • Lightpipe Configuration Dual Round
  • Lightpipe Profile Standard
  • Number of Ports 6
  • Data Rate (Max) 16
  • PCB Termination Method Through Hole - Press-Fit
  • Cage Material Nickel Silver
  • Tail Length 2.05
  • PCB Thickness (Recommended) 1.5
  • Heat Sink Compatible No
  • For Use With SFP+ SMT Connector
  • UL Flammability Rating UL 94V-0
  • Packaging Method Box & Tray
  • EMI Containment Elastomeric Gasket
  • Included Lightpipe Yes
2007250-1 SFP/SFP+/zSFP+
  • Form Factor SFP+
  • Product Type Cage Assembly
  • Cage Type Ganged
  • Included Heat Sink No
  • Integrated Lightpipes No
  • Port Matrix Configuration 1 x 6
  • Lightpipe Configuration Dual Round
  • Lightpipe Profile Standard
  • Number of Ports 6
  • Data Rate (Max) 16
  • PCB Termination Method Through Hole - Press-Fit
  • Cage Material Nickel Silver
  • Tail Length 2.05
  • PCB Thickness (Recommended) 2.25
  • Heat Sink Compatible No
  • For Use With SFP+ SMT Connector
  • UL Flammability Rating UL 94V-0
  • Packaging Method Box & Tray
  • EMI Containment External Springs
  • Included Lightpipe Yes
2007492-8 SFP/SFP+/zSFP+
  • Form Factor SFP+
  • Product Type Cage Assembly with Integrated Connector
  • Cage Type Stacked
  • Included Heat Sink No
  • Port Matrix Configuration 2 x 1
  • Number of Ports 2
  • Data Rate (Max) 16
  • Contact Mating Area Plating Material Gold or Gold Flash over Palladium Nickel
  • Contact Mating Area Plating Thickness .76
  • Tail Plating Material Tin
  • PCB Termination Method Through Hole - Press-Fit
  • Cage Material Nickel Silver
  • Tail Length 3
  • PCB Thickness (Recommended) 1.5
  • Heat Sink Compatible No
  • UL Flammability Rating UL 94V-0
  • Packaging Method Package
  • EMI Containment External Springs
  • Included Lightpipe No
2007170-1 SFP/SFP+/zSFP+
  • Form Factor SFP+
  • Product Type Cage
  • Cage Type Ganged
  • Included Heat Sink No
  • Port Matrix Configuration 1 x 6
  • Number of Ports 6
  • Data Rate (Max) 16
  • PCB Termination Method Through Hole - Press-Fit
  • Cage Material Nickel Silver
  • Tail Length 2.05
  • PCB Thickness (Recommended) 1.5
  • Heat Sink Compatible No
  • For Use With SFP+ SMT Connector
  • UL Flammability Rating UL 94V-0
  • Packaging Method Box & Tray
  • EMI Containment Elastomeric Gasket
  • Included Lightpipe No
2007135-1 SFP/SFP+/zSFP+
  • Form Factor SFP+
  • Product Type Cage
  • Cage Type Ganged
  • Included Heat Sink No
  • Port Matrix Configuration 1 x 4
  • Number of Ports 4
  • Data Rate (Max) 16
  • PCB Termination Method Through Hole - Press-Fit
  • Cage Material Nickel Silver
  • Tail Length 2.05
  • PCB Thickness (Recommended) 1.5
  • Heat Sink Compatible No
  • For Use With SFP+ SMT Connector
  • UL Flammability Rating UL 94V-0
  • Packaging Method Box & Tray
  • EMI Containment Elastomeric Gasket
  • Included Lightpipe No
2007417-5 SFP/SFP+/zSFP+
  • Form Factor SFP+
  • Product Type Cage Assembly with Integrated Connector
  • Cage Type Stacked
  • Included Heat Sink No
  • Integrated Lightpipes Yes
  • Port Matrix Configuration 2 x 2
  • Lightpipe Configuration Four Triangular (Inner & Outer)
  • Number of Ports 4
  • Data Rate (Max) 16
  • Contact Mating Area Plating Material Gold or Gold Flash over Palladium Nickel
  • Contact Mating Area Plating Thickness .76
  • Tail Plating Material Tin
  • PCB Termination Method Through Hole - Press-Fit
  • Cage Material Nickel Silver
  • Tail Length 3
  • PCB Thickness (Recommended) 1.5
  • Heat Sink Compatible No
  • UL Flammability Rating UL 94V-0
  • Packaging Method Box
  • EMI Containment Elastomeric Gasket
  • Included Lightpipe Yes
2007562-5 SFP/SFP+/zSFP+
  • Form Factor SFP+
  • Product Type Cage Assembly with Integrated Connector
  • Cage Type Stacked
  • Included Heat Sink No
  • Integrated Lightpipes Yes
  • Port Matrix Configuration 2 x 6
  • Lightpipe Configuration Four Triangular (Inner & Outer)
  • Number of Ports 12
  • Data Rate (Max) 16
  • Contact Mating Area Plating Material Gold or Gold Flash over Palladium Nickel
  • Contact Mating Area Plating Thickness .76
  • Tail Plating Material Tin
  • PCB Termination Method Through Hole - Press-Fit
  • Cage Material Nickel Silver
  • Tail Length 3
  • PCB Thickness (Recommended) 1.5
  • Heat Sink Compatible No
  • UL Flammability Rating UL 94V-0
  • Packaging Method Tray
  • EMI Containment External Springs
  • Included Lightpipe Yes
2007180-1 SFP/SFP+/zSFP+
  • Form Factor SFP+
  • Product Type Cage Assembly
  • Cage Type Ganged
  • Included Heat Sink No
  • Integrated Lightpipes No
  • Port Matrix Configuration 1 x 2
  • Lightpipe Configuration Dual Round
  • Lightpipe Profile Standard
  • Number of Ports 2
  • Data Rate (Max) 16
  • PCB Termination Method Through Hole - Press-Fit
  • Cage Material Nickel Silver
  • Tail Length 2.05
  • PCB Thickness (Recommended) 1.5
  • Heat Sink Compatible No
  • For Use With SFP+ SMT Connector
  • UL Flammability Rating UL 94V-0
  • Packaging Method Box & Tray
  • EMI Containment Elastomeric Gasket
  • Included Lightpipe Yes
2007394-8 SFP/SFP+/zSFP+
  • Form Factor SFP+
  • Product Type Cage Assembly with Integrated Connector
  • Cage Type Stacked
  • Included Heat Sink No
  • Port Matrix Configuration 2 x 4
  • Number of Ports 8
  • Data Rate (Max) 16
  • Contact Mating Area Plating Material Gold or Gold Flash over Palladium Nickel
  • Contact Mating Area Plating Thickness .76
  • Tail Plating Material Tin
  • PCB Termination Method Through Hole - Press-Fit
  • Cage Material Nickel Silver
  • Tail Length 3
  • PCB Thickness (Recommended) 1.5
  • Heat Sink Compatible No
  • UL Flammability Rating UL 94V-0
  • Packaging Method Tray
  • EMI Containment External Springs
  • Included Lightpipe No
2007254-1 SFP/SFP+/zSFP+
  • Form Factor SFP+
  • Product Type Cage
  • Cage Type Single
  • Included Heat Sink No
  • Integrated Lightpipes No
  • Port Matrix Configuration 1 x 1
  • Lightpipe Configuration Dual Round
  • Lightpipe Profile Standard
  • Number of Ports 1
  • Data Rate (Max) 16
  • PCB Termination Method Through Hole - Press-Fit
  • Cage Material Nickel Silver
  • Tail Length 2.05
  • PCB Thickness (Recommended) 2.25
  • Heat Sink Compatible No
  • For Use With SFP+ SMT Connector
  • UL Flammability Rating UL 94V-0
  • Packaging Method Box & Tray
  • EMI Containment External Springs
  • Included Lightpipe Yes
2007637-8 SFP/SFP+/zSFP+
  • Form Factor SFP+
  • Product Type Cage Assembly with Integrated Connector
  • Cage Type Stacked
  • Included Heat Sink No
  • Port Matrix Configuration 2 x 2
  • Number of Ports 4
  • Data Rate (Max) 16
  • Contact Mating Area Plating Material Gold or Gold Flash over Palladium Nickel
  • Contact Mating Area Plating Thickness .76
  • Tail Plating Material Tin
  • PCB Termination Method Through Hole - Press-Fit
  • Cage Material Nickel Silver
  • Tail Length 3
  • PCB Thickness (Recommended) 1.5
  • Heat Sink Compatible No
  • UL Flammability Rating UL 94V-0
  • Packaging Method Package
  • EMI Containment External Springs
  • Included Lightpipe No
2149490-5 SFP/SFP+/zSFP+
  • Form Factor SFP+
  • Product Type Cage Assembly with Integrated Connector
  • Cage Type Stacked
  • Included Heat Sink No
  • Integrated Lightpipes Yes
  • Port Matrix Configuration 2 x 8
  • Lightpipe Configuration Four Triangular (Inner & Outer)
  • Number of Ports 16
  • Data Rate (Max) 16
  • Contact Mating Area Plating Material Gold or Gold Flash over Palladium Nickel
  • Contact Mating Area Plating Thickness .76
  • Tail Plating Material Tin
  • PCB Termination Method Through Hole - Press-Fit
  • Cage Material Nickel Silver
  • Tail Length 3
  • PCB Thickness (Recommended) 1.5
  • Heat Sink Compatible No
  • UL Flammability Rating UL 94V-0
  • Packaging Method Package
  • EMI Containment External Springs
  • Included Lightpipe Yes
2127932-2 Pluggable I/O Cable Assemblies
  • Cable Assembly Category High Speed
  • Cable Assembly Type Small Form Factor Pluggable (SFP)
  • Shielded Yes
  • Connector Type (End A) SFP+
  • Connector Type (End B) SFP+
  • Cable Style Madison TurboTwin - Round Jacketed
  • Product Designation Patch Cord
  • Product Type Cable Assembly
  • Latching Style Retractable Pin
  • Number of Positions 2-Pair
  • Number of Power Positions 0
  • Number of Signal Positions 4
  • Keyed No
  • Configuration Double-Ended
  • Impedance 100
  • Data Rate 10
  • Jacket Material Flexible PVC
  • Equalized No
  • Color Black
  • Shield Material Aluminum/Polyester/Aluminum Tape/Tin-Plated Copper Braid
  • Strain Relief Type Overmold
  • Release Type Pull Tab
  • Contact Mating Area Plating Material Gold
  • Jackscrew Without
  • Housing Material Zinc Alloy
  • Wire Size 28
  • Wire Size .081
  • Overall Outside Cable Diameter 4.70 mm
  • Flammability Rating CL2
  • IEEE 1394 No
  • Cable Assembly Length 1
  • CLOUDSPLITTER No
2170030-1 SFP/SFP+/zSFP+
  • Form Factor SFP+
  • Product Type Cage Assembly
  • Cage Type Ganged
  • Included Heat Sink No
  • Integrated Lightpipes No
  • Port Matrix Configuration 1 x 4
  • Lightpipe Configuration Dual Round
  • Lightpipe Profile Ultra Low
  • Number of Ports 4
  • Data Rate (Max) 16
  • PCB Termination Method Through Hole - Press-Fit
  • Cage Material Nickel Silver
  • Tail Length 2.05
  • PCB Thickness (Recommended) 2.25
  • Heat Sink Compatible No
  • For Use With SFP+ SMT Connector
  • UL Flammability Rating UL 94V-0
  • Packaging Method Box & Tray
  • EMI Containment External Springs
  • Included Lightpipe Yes
2007538-5 SFP/SFP+/zSFP+
  • Form Factor SFP+
  • Product Type Cage Assembly with Integrated Connector
  • Cage Type Stacked
  • Included Heat Sink No
  • Integrated Lightpipes Yes
  • Port Matrix Configuration 2 x 1
  • Lightpipe Configuration Four Triangular (Inner & Outer)
  • Number of Ports 2
  • Data Rate (Max) 16
  • Contact Mating Area Plating Material Gold or Gold Flash over Palladium Nickel
  • Contact Mating Area Plating Thickness .76
  • Tail Plating Material Tin
  • PCB Termination Method Through Hole - Press-Fit
  • Cage Material Nickel Silver
  • Tail Length 3
  • PCB Thickness (Recommended) 1.5
  • Heat Sink Compatible No
  • UL Flammability Rating UL 94V-0
  • Packaging Method Tray
  • EMI Containment Elastomeric Gasket
  • Included Lightpipe Yes
2007194-2 SFP/SFP+/zSFP+
  • Form Factor SFP+
  • Product Type Cage
  • Cage Type Single
  • Included Heat Sink No
  • Port Matrix Configuration 1 x 1
  • Number of Ports 1
  • Data Rate (Max) 16
  • Tail Plating Material Tin
  • PCB Termination Method Through Hole - Solder
  • Cage Material Nickel Silver
  • Tail Length 2.8
  • PCB Thickness (Recommended) 1.5
  • Heat Sink Compatible Yes
  • For Use With SFP+ SMT Connector
  • Packaging Method Box & Tray
  • EMI Containment External Springs
  • Included Lightpipe No
  • Comment Meets requirements for PCI applications / Heat Sink Opening