RBD-75-S-00 RF Connectors
  • Connector Interface BNC
  • Connector Style Plug
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Number of Positions 1
  • Impedance 75
  • Cable Connector Orientation Straight
  • Body Material Brass
  • Body Plating Material Nickel
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Brass
  • Termination Method to Wire & Cable Solder Terminal
  • Mated Outer Diameter (Approximate) 14.529
  • Shield Outside Diameter (Min) .9 – 3
  • Dielectric Outside Diameter (Max) 1.55
  • Conductor Outside Diameter .64
  • Cable Type RG 179
  • Dielectric Material PTFE
  • Coupling Nut Material Brass
  • Grade Military
RBD-75-M-00 RF Connectors
  • Connector Interface BNC
  • Connector Style Plug
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Number of Positions 1
  • Impedance 75
  • Cable Connector Orientation Straight
  • Body Material Brass
  • Body Plating Material Nickel
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Brass
  • Termination Method to Wire & Cable Solder Terminal
  • Mated Outer Diameter (Approximate) 14.529
  • Shield Outside Diameter (Min) 2.1 – 5
  • Dielectric Outside Diameter (Max) 3
  • Conductor Outside Diameter 1.27
  • Cable Type RG 179
  • Packaging Method Box
  • Dielectric Material PTFE
  • Coupling Nut Material Brass
  • Grade Military
RTD-50-L-04 RF Connectors
  • Connector Interface TNC
  • Connector Style Jack
  • Connector & Contact Terminates To Wire & Cable
  • Impedance 50
  • Cable Connector Orientation Straight
  • Body Material Brass/Beryllium Copper
  • Body Plating Material Nickel
  • Center Contact Plating Material Gold
  • Center Contact Material Brass
  • Termination Method to Wire & Cable Solder
  • Mated Outer Diameter (Approximate) 16.256
  • Shield Outside Diameter (Min) 4.1 – 9.5
  • Dielectric Outside Diameter (Max) 7.3
  • Recommended Panel Thickness 3.2
  • Conductor Outside Diameter 2.45
  • Cable Type RG 165
  • Packaging Method Package
  • Dielectric Material PTFE
  • Coupling Nut Material Brass
RBD-50-S-02 RF Connectors
  • Connector Interface BNC
  • Connector Style Jack
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Number of Positions 1
  • Impedance 50
  • Cable Connector Orientation Straight
  • Body Material Brass
  • Body Plating Material Nickel
  • Body Shape Circular
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Brass
  • Termination Method to Wire & Cable Solder
  • Panel Mount Feature Type Hex Nut
  • Connector Mounting Type Panel
  • Mated Outer Diameter (Approximate) 14.529
  • Shield Outside Diameter (Min) .9 – 3
  • Dielectric Outside Diameter (Max) 1.55
  • Recommended Panel Thickness 3.2
  • Conductor Outside Diameter .64
  • Cable Type RG 174
  • Packaging Method Box
  • Dielectric Material PTFE
  • Coupling Nut Material Brass
  • Grade Military
RBD-50-M-01 RF Connectors
  • Connector Interface BNC
  • Connector Style Plug
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Number of Positions 1
  • Impedance 50
  • Cable Connector Orientation Right Angle
  • Body Material Brass
  • Body Plating Material Nickel
  • Body Shape Circular
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Brass
  • Termination Method to Wire & Cable Solder
  • Mated Outer Diameter (Approximate) 14.529
  • Shield Outside Diameter (Min) 2.1 – 5
  • Dielectric Outside Diameter (Max) 3
  • Conductor Outside Diameter 1.27
  • Cable Type RG 141
  • Packaging Method Package
  • Dielectric Material PTFE
  • Coupling Nut Material Brass
  • Grade Military
RBD-50-M-00 RF Connectors
  • Connector Interface BNC
  • Connector Style Plug
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Number of Positions 1
  • Impedance 50
  • Cable Connector Orientation Straight
  • Body Material Brass
  • Body Plating Material Nickel
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Brass
  • Termination Method to Wire & Cable Solder Terminal
  • Mated Outer Diameter (Approximate) 14.529
  • Shield Outside Diameter (Min) 2.1 – 5
  • Dielectric Outside Diameter (Max) 3
  • Conductor Outside Diameter 1.27
  • Cable Type RG 141
  • Packaging Method Package
  • Dielectric Material PTFE
  • Coupling Nut Material Brass
  • Grade Military
RBD-50-L-00 RF Connectors
  • Connector Interface BNC
  • Connector Style Plug
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Number of Positions 1
  • Impedance 50
  • Cable Connector Orientation Straight
  • Body Material Brass
  • Body Plating Material Nickel
  • Body Shape Circular
  • Body Insulation With
  • Center Contact Plating Material Gold
  • Center Contact Material Brass
  • Termination Method to Wire & Cable Solder Terminal
  • Mated Outer Diameter (Approximate) 14.529
  • Shield Outside Diameter (Min) 4.1 – 9.5
  • Dielectric Outside Diameter (Max) 7.3
  • Conductor Outside Diameter 2.45
  • Cable Type RG 165
  • Packaging Method Box
  • Dielectric Material PTFE
  • Coupling Nut Material Brass
  • Grade Military
RTD-50-L-01 RF Connectors
  • Connector Interface TNC
  • Connector Style Plug
  • Connector & Contact Terminates To Wire & Cable
  • Impedance 50
  • Cable Connector Orientation Right Angle
  • Body Material Brass
  • Body Plating Material Nickel
  • Body Shape Circular
  • Center Contact Plating Material Gold
  • Center Contact Material Brass
  • Termination Method to Wire & Cable Solder
  • Mated Outer Diameter (Approximate) 16.256
  • Shield Outside Diameter (Min) 4.1 – 9.5
  • Dielectric Outside Diameter (Max) 7.3
  • Conductor Outside Diameter 2.45
  • Cable Type RG 165
  • Packaging Method Box
  • Dielectric Material PTFE
  • Coupling Nut Material Brass
RBD-50-S-00 RF Connectors
  • Connector Interface BNC
  • Connector Style Plug
  • Sealable No
  • Connector & Contact Terminates To Wire & Cable
  • Number of Positions 1
  • Impedance 50
  • Cable Connector Orientation Straight
  • Body Material Brass
  • Body Plating Material Nickel
  • Body Insulation Without
  • Center Contact Plating Material Gold
  • Center Contact Material Brass
  • Termination Method to Wire & Cable Solder Terminal
  • Mated Outer Diameter (Approximate) 14.529
  • Shield Outside Diameter (Min) .9 – 3
  • Dielectric Outside Diameter (Max) 1.55
  • Conductor Outside Diameter .64
  • Cable Type RG 174
  • Packaging Method Box
  • Dielectric Material PTFE
  • Coupling Nut Material Brass
  • Grade Military
5146026-1 PCMCIA Connectors
  • Button Ejector Side Right
  • Connector Style Header - Pin
  • Header Type Header & Ejector Assembly
  • Connector System Cable-to-Board
  • Sealable No
  • Connector & Contact Terminates To Printed Circuit Board
  • Rail Plate Material Stainless Steel
  • Organizer Material Liquid Crystal Polymer (LCP)
  • Rail Material Liquid Crystal Polymer (LCP)
  • Product Type Connector
  • Shielded No
  • Profile Raised
  • Number of Positions 68
  • Number of Rows 4
  • Number of Slots 1
  • Preloaded Yes
  • Lead Configuration Staggered
  • Voltage 5
  • Shroud Material Liquid Crystal Polymer (LCP)
  • Button Color Black
  • Lever Material Stainless Steel
  • Hold-Downs Without
  • Color Black
  • Button Material Liquid Crystal Polymer (LCP)
  • Ejector Material Stainless Steel
  • Solder Tail Contact Plating Material Tin
  • Underplate Material Nickel
  • Contact Current Rating (Max) .1
  • Contact Base Material Brass
  • Contact Mating Area Plating Thickness 30
  • Contact Type Pin
  • Contact Mating Area Plating Material Gold
  • PCB Mounting Style Through Hole
  • Mounting Angle Right Angle
  • Connector Mounting Type Board Mount
  • Mating Alignment Without
  • Board Mount Top Side
  • Centerline (Pitch) 1.27
  • Housing Material LCP (Liquid Crystal Polymer)
  • Height above PC Board 6.98
  • Operating Temperature Range -20 – 70
  • Circuit Application Signal
  • UL Flammability Rating UL 94V-0
  • Packaging Quantity 10
  • Comment Four size M2 screws (customer supplied) are required for fastening the pin header to the PC board.