Contact us to request more information about this model, including customization options

Contact Us

All channels are measured simultaneously with each sampled at 16 bits, filtered, ranged, and calibration compensated at up to 42,500 samples/sec/channel by the built-in digital signal processor.  The output range, filter frequency and calibration of each channel, as well as the PCM configuration, can be set by the user. A frame counter and CRC cyclic redundancy check can be included in each telemetry frame to allow dropped frames and data corruption to be detected. An optional aerodynamic adaptor covers top exposed screws and provides tie down holes for captivating connector mates. 


User Programmable Settings - The output range and low-pass filter of each
65210ES accelerometer and rate gyro axis can be set via a built-in RS-485 interface, as can the IRIG-106 encoded PCM output configuration (channels output, sub-communication, word size, NRZL/RNRZ-L/Bi-Phase-L/RBi-Phase-L encoding). The carrier frequency for optional built-in multichannel S band transmitters can also be set. Programmability reduces costs as the 65210ES can be stocked and configured to meet different application requirements as needed.
Compensated Serial and Telemetry Outputs -  Calibrated, ranged, and filtered data can be
streamed out at up to 3Mbit/sec via RS-485 or IRIG-106 encoded PCM.
Built-in Calibration - Calibration data for each internal sensor is maintained in the instrument.

High Accuracy and Linearity over Wide Temperature Range - Accelerometer accuracy is improved by minimizing variations due to temperature and aging effects. Each axial sensor has been tested over the -40 to +85°C temperature range.

Communication Integrity - A CRC16 cyclic redundancy check is available to validate communications. Telemetry also supports a frame counter to ease detection of missing frames.

Self-Test and fixed level outputs simplify installation and system check out by verification of channel integrity and ground station setup.

Sealed, Small Cylindrical Package Sealed package has a 2.80 inch diameter and 3”-12 UN thread for mounting; can be Nitrogen pressurized via builtin valve.

Built-In High Capacity, Fast-Charging Battery - Complete recharge in less than two hours provides up to 20 hours of operation with transmitter off. Built-in monitoring is provided for battery current and voltage. Suitable for Harsh Environments The 65210ES is robust and can be used in harsh environments. The unit will survive 100 g shock while powered.


Please review product documents or contact us for the latest agency approval information.  

Product Type Features

  • Sensor Type  Inertial Systems

Electrical Characteristics

  • Excitation Voltage VDC  8.5 – 36


  • Dimensions MM  Dia 69.85 x 161.34 Length

Usage Conditions

Packaging Features

  • Package  Anodized Aluminium


  • FS Range (±) DEG  1000, 1200, 20000

  • Accuracy  ±0.1% Non-Linearity

Related Materials

Terms and Conditions

Please carefully read the disclaimer before using any of this data.
Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation ("TE"). While TE has used reasonable efforts to ensure its accuracy, TE does not guarantee that it is error-free, nor makes any other representation, warranty, or guarantee that the information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by customers. TE expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular purpose.