Polymeric insulated cables of various designs can be adopted with respect to shielding and metal sheath. Composite or porcelain housings with different creepage lengths are available covering the most common and also extreme pollution levels. The installation of the termination can be done by trained installer equipped with conventional tools. The termination is designed according to the following standards:IEC-60840, IEC-62067, IEC-60815, IEEE-48, IEEE-1313.The cable lug is suitable for all common conductors made of aluminum or copper. The flexible double sealing system is installer-friendly and ensures permanent protection against environmental influences of the topassembly. A heat-shrinkable polymeric tube containing oil-resistant sealant encapsulates the connector barrel and the polymeric insulation transition. The pressure-tight composite housing is made of a glass fiber reinforced (GFR) resin tube with silicone rubber sheds molded to the tube. The interface between stress cone, cable insulation and inner housing will be filled from the top with silicone oil. No prior heating of silicone oil required.
• Pressure-tight and light weight composite housing
• Prefabricated and factory tested silicone rubber stress cone
• No special tools required to install the termination
• Silicone oil filling without preheating
• Isolated base plate for sectionalization
• Fittings made of corrosion-resistant alloy
• Type tested according to IEC 60840 and IEC 62067 standards
Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.
This information has been provided to your free of charge for your use but remains the sole property of TE Connectivity Corporation (''TE'') or SnapEDA, Inc. or Ultra Librarian/EMA Design Automation, Inc. (collectively, "Company"). While Company has used reasonable efforts to ensure its accuracy, Company does not guarantee that it is error-free, not makes any other representation, warranty, or guarantee that the information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by customers. Company expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular purpose.