Economical design that meets the needs of less demanding applications. TE's Micro-MaTch Value-line cable assemblies are a new addition to the well-established Micro-MaTch family. The new series of standard cable assemblies has been designed for general purpose applications where very broad temperature ranges, high durability cycles and vibration resistance are less critical. The cable assemblies are available from 4 to 20 positions, in standard lengths of 7.5cm, 15cm and 20cm or in customized lengths.
Save assembly time with an easy-connect system
Operating temperature of -30 to +80°C
Quick delivery with standard products ranging from 4 to 20 positions and 7.5 to 20 cm (0.246 to 0.656 ft) lengths
Customized lengths are also available upon request
Home automation and alarm equipment
Air & climate control units
Set Top Boxes, Audio- & Video equipment Pay terminals
Our Micro-MaTch connector family, with its contact spacing of 1.27mm, offers a variety of
wire-to-board and board-to-board interconnections. The Micro-MaTch contact helps prevent fretting corrosion, the traditional failure mode in tin-plated connections. Relative movements caused by vibrations/thermal expansion between male and female contacts are absorbed by an additional positioning spring in the female part. By preventing movements on the contact spot, a gas tight connection can make the Micro-MaTch contact spring system fretting corrosion resistant.
Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.
This information has been provided to your free of charge for your use but remains the sole property of TE Connectivity Corporation (''TE'') or SnapEDA, Inc. or Ultra Librarian/EMA Design Automation, Inc. (collectively, "Company"). While Company has used reasonable efforts to ensure its accuracy, Company does not guarantee that it is error-free, not makes any other representation, warranty, or guarantee that the information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by customers. Company expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular purpose.