New Product: LUMAWISE drive LED holder Type Z50

LUMAWISE Drive LED Holder Type Z50

LUMAWISE Drive LED Holder Type Z50

TE's new LUMAWISE drive LED Holder Type Z50, used in track and spot lighting, integrates DC/DC driver and the holder into a single package that enables lighting designers to develop compact, better-looking and more cost-effective lighting products.

September 14, 2017

HARRISBURG, Pa., USA – TE Connectivity (TE), a world leader in connectivity and sensors, introduces the LUMAWISE drive LED Holder Type Z50 for chip-on-board (COB) LEDs. The new LUMAWISE drive LED Holder Type Z50, used in track and spot lighting, integrates DC/DC driver and the holder into a single package that enables lighting designers to develop compact, better-looking and more cost-effective lighting products.

TE’s LUMAWISE drive LED Holder Type Z50 integrates a 48VDC powered constant-current LED driver into the same form factor as TE’s popular 50mm diameter Zhaga-inspired range of LUMAWISE LED holders for COB LEDs. Until recently, most LED drivers have been housed in separate boxes, often larger than the light fixture itself, mounted to the side of the luminaire and remote to the COB light source. This configuration required wiring between the light source and driver, creating design and manufacturing complexity for the designer. TE’s new holder reduces that complexity and allows more flexibility for lighting design, providing a more cost-effective and aesthetically pleasing solution.

TE is unveiling several versions of the LUMAWISE drive LED Holder Type Z50, starting with an on/off model and a 0-10V (sink and source) dimmable type. Both configurations are available in 350mA, 500mA, 700mA and 1050mA versions and a typical forward voltage of 36VDC. Each of these drive currents work with common COB sizes of 16x19mm, 19x19mm, 20x24mm and 24x24mm, making this LED holder suitable for use with over 70 different types of COBs offered by LED manufacturers. The LUMAWISE drive LED Holder Type Z50 can be powered by any 48V power supply and will dim down to 3 percent output current with less than 5 percent flicker.

About TE

TE Connectivity Ltd. is a $13 billion global technology and manufacturing leader creating a safer, sustainable, productive, and connected future. For more than 75 years, our connectivity and sensor solutions, proven in the harshest environments, have enabled advancements in transportation, industrial applications, medical technology, energy, data communications, and the home. With 78,000 employees, including more than 7,000 engineers, working alongside customers in nearly 150 countries, TE ensures that EVERY CONNECTION COUNTS.

Find out more