Air Conditioning
Air Conditioning
Reduction of electricity consumption drives new designs. Compressors are shifting to DC units that can be cycled more efficiently than AC compressors. TE offers hermetic compressor interfaces that can integrate the termination of the magnet wire as well as the drive control wires and circuit protection.
The wiring harness interconnects the PCB to the various components through out the air conditioner. It is a collection of wiring terminals and connectors that sends signals and power to the motor, switches, and sensors. A typical wire and harness would include power and signal connectors, terminals and splices, and heat shrink tubing.
- Univeral MATE-N-LOK
- 3.5 3.96 & 6.2 Centerline 600V 12 A max
- Economy Power Connectors
- Single Wall Fluoropolymer Tubing
- Single Wall Polyolefin Tubing
- Dual Wall Tubing
- AMPLIVAR Products
- Crimpband Splices
- FASTON Electrical Quick Connects
- Positive Lock Connectors
- Ultra-Fast Receptacles & Tabs
- Multiple Circuit Housings with Tabs & Receptacles
- Splices - Open Barrel
- Appliance Connectors
- Standard Timer (AMP RAST 5 Appliance) Connectors2.5mm Centerline Connector
- 2.5mm Centerline Connector System (AMP DUOPLUG)
The PCB is responsible for controlling the temperatures, moto's functionality and the over all air conditioning cycle. On a typical PCB, you will see wire-to-board power and signal interconnects, relays, and sockets.
- Economy Power Connectors
- Signal/Power Double Lock Connectors
- 3.5, 3.96 & 6.2 Centerline 600 V, 12 A max
- FASTON Electrical Quick Connects
- Positive Lock Connectors
- Ultra-Fast Receptacles & Tabs
- Multiple Circuit Housings with Tabs & Receptacles
- Standard Timer (AMP RAST 5 Appliance) Connectors2.5mm Centerline Connector
- 2.5mm Centerline Connector System (AMP DUOPLUG)
- 2Pro Devices
TE offers hermetic compressor interfaces that can integrate the termination of the magnet wire as well as the drive control wires and circuit protection.
All Air Conditioning units have an electric fan or blower to distribute cooled air to the room. Magnet wire terminals or splices are used to connect the winding of the fan or blower motor to the power source or to a motor control board. These can be individual terminations or can be integrated into one-piece connector or motor I/O assembly for faster assembly.
All Air Conditioning units have an electric fan or blower to distribute cooled air to the room. Magnet wire terminals or splices are used to connect the winding of the fan or blower motor to the power source or to a motor control board. These can be individual terminations or can be integrated into one-piece connector or motor I/O assembly for faster assembly.
More robust than in other appliance applications, these connections sense the temperature and send the data to PCB sensor. A thermostat is set at the desired temperature and a sensor controls the compressor to maintain this set temperature. Temperature switches and sensors are connected to the wiring harness using individual terminals.
The four-way valve is a fluid control valve whose body has four ports equally spaced round the valve chamber and the plug has two passages to connect adjacent ports.
TE offers hermetic compressor interfaces that can integrate the termination of the magnet wire as well as the drive control wires and circuit protection.
If your browser cookies are cleared, your temporary list will be lost. You can save this list and get all of the My Part List features by becoming a registered user of the TE web site.
Remove Note