Telecommunications Outside Plant
Air Pressure Fittings (AMP-FIT)
Designed specifically for use on telephone air pressurization systems. Require no solvents or special cleaning procedures, fittings for CA-3131 type feeder pipe, 3/8 [9.53] tubing, 5 and 10 port manifolds with preassembled "F" and shutoff valves.
Browse the catalog:
CERTI-SEAL Coax Coupling Closure
One piece coupling closure designed for direct buried splicing of coaxial cable. The design joins two semicircular halves which are filled with gel that extrudes on closing to form an environmental seal. Coax cable RG6/RG9 and RG7/RG11 are accomodated.
Browse the catalog:
Copper Ground Grid Connectors (WRENCH-LOK)
Uses a shear-head bolt to drive a tapered wedge into the connector body with a common ratchet or socket wrench. When the connection is tightened to the proper torque, the head shears off, providing visual indication of a perfect connection.
Browse the catalog:
Copper Grounding Connectors (SHEAR-LOK)
SHEAR-LOK Copper Tap/Grounding Connector for applications where connections must be made between conductor and rods and are required to withstand mid-range (20 kA symmetrical RMS) magnitudes of fault current. Ideal for Telco and CATV applications.
Browse the catalog:
Copper Grounding System (AMPACT)
AMPACT copper taps are used when you need a permanent connection. They resist corrosion and will not loosen.The tap's "C" member is composed of an aluminum bronze alloy, and the wedge of a copper alloy very close to pure copper.
Browse the catalog:
Cross Connect Terminals
The single-pair, Cross Connect modules are 94V-0 rated and meet Bellcore TR-NWT-000975 immersion requirements. These weather-resistant modules are gel sealed for protection against moisture, insects and airborne contaminants.
Browse the catalog:
Grounding and Bonding Connectors (C-LOK)
Composed of "C" and "wedge" components, both made of a copper alloy, in a configuration that exerts a spring pressure for connecting solid or stranded copper conductors in grounding applications including direct burial.
Browse the catalog:
Miscellaneous Grounding Connectors
Provides a permanent, positive connection of the grounding wire to flat metal surfaces such as tower supports, base plates and substation structures. Clamp designed with "spring-like" qualities which prohibit relaxation under any environmental condition.
Browse the catalog:
Telecommunication Cable Connectors and Accessories (AMPSTACK)
These modular connectors can be used for straight splicing, pluggable/bridge and half-tapping of telecommunication cables. Solid copper or aluminium conductor wires are available in dry, flame retardant or pre-sealed versions of 10, 20 or 25 pairs.
Browse the catalog:
Telephone Cable Connectors (Tel-Splice)
Used for splicing telephone cable conductors using an insulation displacement type contact. Highly resistant to chemical attack and moisture. Any combination of solid copper wire, 26-19 AWG [0.4-0.9 mm] can be terminated in one connector.
Browse the catalog:
Telephone Cable Splice (PICABOND)
For splicing multiconductor telephone cables with any solid core wire, 19 to 26 AWG [.9-.4 mm]. Straight, butt, tap, and bridge splices can be made with these connectors. Tapping may even be accomplished without interrupting service.
Browse the catalog:
If your browser cookies are cleared, your temporary list will be lost. You can save this list and get all of the My Part List features by becoming a registered user of the TE web site.
