• English
Home > Products > Connectors & Connector Components > Terminals & Splices > Magnet Wire

Magnet Wire

Cluster Blocks

Cluster Blocks

One piece housing connectors that are fully insulated, giving a quick-connect means for electrically connecting sealed hermetic header pins on compressors. Connectors accept pins from one side so reversing the polarity is prevented.

Browse the catalog:

COPALUM Splices

COPALUM Splices

Butt and parallel splices that terminate to copper or aluminum wire. Aluminum wire sizes range from 8 to 4/0 [8.6 to 110.9 mm2] and copper 10 to 3/0 [4.8 to 85.9 mm2]. Sealing is an option.

Browse the catalog:

COPALUM Terminals

COPALUM Terminals

Flag and straight terminals that terminate to copper or aluminum wire. Aluminum wire sizes range from 8 to 4/0 [8.6 to 110.9 mm2] and copper 10 to 3/0 [4.8 to 85.9 mm2]. Sealing is an option.

Browse the catalog:

Crimpband Splices

Crimpband Splices

Crimpband product is a value version of AMPLIVAR and Lead Wire open barrel splices. In a one-step crimping operation, the machine feeds, cuts, forms, and crimps the material. There are two versions, MTM for magnet wire and RTM for lead wire or solid wire. Crimpband splices are available in 7 through 11 serrations for terminations in the 400 to 13,000 CMA Range.

Browse the catalog:

MAG-MATE Terminals

MAG-MATE Terminals

IDC terminals available in poke-in, poke-in tab, splice, crimp wire barrel, solder post, quick connect tab, pin and receptacle styles. Selections terminate magnet wire ranging from 12 AWG up to 52 AWG.

Browse the catalog:

Magnet Wire Splices

Magnet Wire Splices

Specifically designed to terminate magnet wire to itself or in combination with standard solid or stranded lead wire. The splices have machined, sharp edged serrations inside the crimp barrels. These serrations, made by a special production process, pierce the insulating layer of magnet wires in a manner that provides a large contact area.

Browse the catalog:

SIAMEZE Terminals

SIAMEZE Terminals

A full selection of insulation displacement (IDC) terminals for interconnecting copper magnet wires, lead wires, and other components. Terminals are available in wire-to-wire, Lead Lok, quick disconnect tabs, posts, pin and receptacle terminals.

Browse the catalog:

Splices - Open Barrel

Splices - Open Barrel

A crimped terminal (insulated or non-insulated) that joins two wires together with the barrel open. Serration choices can be made as well as thru or pigtail splicing types are available.

Browse the catalog:

TERMI-FOIL Terminals & Splices

TERMI-FOIL Terminals & Splices

Designed to use aluminum foil or strip instead of copper wire windings. Terminals are available in two types: wire to foil styles (for AWG wire Sizes 22 to 8 [0.3 to 8 mm²] and larger tap types (in lengths up to 15 in. [381 mm]).

Browse the catalog:

This list is temporary. The list will not be viewable on another computer and will be deleted within 30 days.

If your browser cookies are cleared, your temporary list will be lost. You can save this list and get all of the My Part List features by becoming a registered user of the TE web site.

Your notes will be stored and associated with this part.

Save
Cancel

Create a New List

Create
Cancel

Confirm Part Removal

This part will be removed from your list:

Remove Part
Cancel

Confirm Note Removal

Your note will be removed permanently

Remove Note
Cancel