Soft Shell Power Products

Soft Shell Power Products
Soft Shell Connectors
Our soft shell pin and socket connectors provide a reliable and economical means of grouping multiple-lead connections in today's computer, appliance or industrial and commercial applications. As electrical functions and performance requirements have increased, the soft shell pin and socket product selection continues to evolve and offer new designs and features to answer these modern industry requirements. This family of connectors includes both round (pin and socket) and rectangular (blade and receptacle) contact styles that are available in a variety of housing sizes and colors.

The newest products include the Grace Inertia and the micro MATE-N-LOK connectors, which both offer benefits of improved density, keying and current carrying capability. In addition, special high current upgrade contacts are available to make use of the economical housings in the universal MATE-N-LOK II product line, and boost the current carrying capacity by over 80%.

Documents & Resources

Products

    .093 Commercial Pin and Socket Connectors
  • The .093 Commerical Pin and Socket connectors are free hanging or panel mount connectors with housings that are available in 1 to 15 positions and accept either pin or socket contacts. The .093 Commercial Pin and Socket Connectors are economical commercial grade connectors.
    .156 MATE-N-LOK Connectors
  • Three and four position receptacles (cap) and plugs that are free hanging or panel mount. Removable, crimp snap-in contacts accept 20-10 AWG wire sizes.
    3mm Low Profile Micro MATE-N-LOK Connectors
  • The 3mm, low-profile connector joins the proven Micro MATE-N-LOK line of soft-shell connectors widely used in appliance, instrumentation, industrial machinery, home equipment, and security system industries. The low-profile version was created to meet the specific demands of the lighting industry.
    AMP-DUAC PL / PL - II / UPC Products
  • The AMP-DUAC line offers a variety of wire-to-wire or wire-to-board connectors, featuring the DUAL-ACTION contact design that provides better lead-in and reduces contact mating forces. The AMP-DUAC PL-II connector is the newest in the family and offers a new position lock on both the power and signal contacts to ensure contacts remain in position in the cable receptacle.
    Grace Inertia Connector Series
  • The Grace Inertia Connector series mates to simultaneously complete the circuit and then locks the connector for an ideal connector mating reliability. These connectors can be used in a wide range of large electrical products from home appliances to vending machines and are a solution that eliminates human error during assembly.
    Inverted Thru-Board SMT Connectors
  • The SMT thru-board connector provides a means to bring power from the underside of an FR4 or aluminum-clad pc board, eliminating issues of dressing wires on the top side of LED boards. The 2-position through 6-position connector utilizes surface-mount technology on the top of the board and passes through the board to present an underside interface.
    LGH Micro-Miniature Connectors and Cable Assemblies
  • The Micro-Miniature LGH leads and receptacles find wide applications where high voltage is used in hostile environments. These small, lightweight connectors offer high voltage performance with operating voltages up to 12 KVDC and operation to 100,000 ft. altitude. The lead wires are color coded for easy identification.
    LGH Single-Pin Connectors and Cable Assemblies
  • LGH leads and receptacles find wide application where high voltage is used in hostile environments. LGH leads and receptacles are lightweight, miniature, extremely reliable and they maintain peak performance under high temperature, high altitude applications. They are equally applicable to low temperature, low altitude devices.
    Low Power Sealed Lighting Connectors
  • The low power sealed lighting connector is for indoor/ outdoor lighting applications, and is well suited for any application where low power (5 amp, 300 volts maximum), sealing (IP67) and UV resistant (UL F1) connections are required.
    Mini Universal MATE-N-LOK Connectors
  • These high density headers and housings, with positions ranging from 1-24, offer a .163 inch centerline. Seals are available for splash protection.
    Mini Universal MATE-N-LOK II Connectors
  • These high density headers and housings, with positions ranging from 1-24, offers a .163 inch centerline. Seals are available for splash protection. Available for wire-to-wire and wire-to-board applications, these connectors mate with standard Mini-Universal MATE-N-LOK headers. Pins and sockets can be intermixed in the same housing although they cannot be intermixed with standard Mini-Universal Mini-Universal MATE-N-LOK housings. Three point stabilization provides terminal position assurance.
    NECTOR Connector System
  • The NECTOR-S connector series is designed according the IEC 60320 standard for lighting industry applications, where size and easy interconnection are key requirements. It is installable in small fixtures into furniture, ceiling, wall and floors.
    NECTOR-S Connectors
  • The NECTOR-S connector series is designed according the IEC 60320 standard for lighting industry applications, where size and easy interconnection are key requirements. It is installable in small fixtures into furniture, ceiling, wall and floors.
    Power Double-Lock Connectors
  • AMP Power Double Lock connectors offer a compact design for use in power circuit applications in refrigerators, air conditioners, washing machines, gas equipment, copying machines and automatic vending machines. These connectors can be used singly by inserting wire-terminated crimp snap-in contacts into the housing.
    Universal MATE-N-LOK Connectors and Accessories
  • Standard density headers and housings for Universal MATE-N-LOK connector systems. Centerline is .250" with positions ranging from 1 to 15. Seals are available for splash protection. Designed to accommodate the specific needs of the lighting industry, the positive polarization features of these connectors help prevent incorrect mating. The circular design allows the connector to pass through a 7/8 inch knock-out hole in electrical fixtures and boxes. The six-position connector accommodates most major electrical industry requirements. Primary applications include the lighting, vending and appliance industries.
    Universal MATE-N-LOK II Connectors
  • Available in 2 through 15 circuit sizes for free hanging or panel mount wire-to-wire connection, the pins and sockets can be intermixed in the same housing. These connectors mate with standard Universal MATE-N-LOK housings and printed circuit board headers.
    VAL-U-LOK Products
  • VAL-U-LOK connectors are low-cost, wite-to-wire, wire-to-board, and wire-to-panel connectors with a 4.2 mm centerline. VAL-U-LOK connectors are easy to mate and un-mate with a positive latch design and are available in single and double row in a variety of positions.
This list is temporary. The list will not be viewable on another computer and will be deleted within 30 days.

If your browser cookies are cleared, your temporary list will be lost. You can save this list and get all of the My Part List features by becoming a registered user of the TE web site.