Board-to-Board Power Connectors
TE Connectivity offers a wide collection of board-to-board power connectors ranging from connectors that can double as wire-to-wire, wire-to-board or card edge products. Many are available as either power only or power and signal solutions and can be used in applications requiring up to 280 amps per linear inch.
As power delivery applications vary widely, our global power interconnect team is proud to offer customizable products, as well as those that are listed below. To identify your requirements, please click Customize Document.
Products
-
2mm Centerline Futurebus+ Connectors (Z-PACK 2mm FB)
- 2mm Centerline Futurebus+ Connectors (Z-PACK 2mm FB) are designed to meet the IEC 61076-4-104 specification and are rated at 3 Amps per contact or 50 Amps per linear inch fully loaded. Three contact mating lengths are in available in 0.75 mm increments.
- Catalog
-
ATCA Z1 Power Connector
- Designed to the PICMG 3.0 Standard, the AdvancedTCA Zone 1 Power Connector features eight high conductivity (20 Amps per contact) size 16 contacts along with twenty-two size 22 contacts (rated at 2 Amps per contact). The contact retention feature eliminates the need for additional hardware, the lead-in design provides better resistance from contact stubbing and the eye-of-the-needle designed pins are compliant press-fit termination.
- Product Presentation
-
Board-to-Board Jumper Assembly
- A board-to-board screw-down jumper assembly for use in LED lighting strips, lighting controls, and channel lettering. The RoHS-compliant jumper, which was originally designed for T8 and T12 fluorescent retrofit tubes, specifically serves the solid state lighting (SSL) market.
-
CROWN CLIP Connectors
- CROWN CLIP sockets are compact, high-current socket connectors for high current bus bar power distribution. The CROWN CLIP sockets utilize the ELCON CROWN BAND technology and are available in single pole format to mate with a solid blade (handling up to 350 Amps) or in a dual pole format to mate with laminated bus bar tabs.
-
CROWN EDGE Connectors
- CROWN EDGE connectors are board-to-board power interconnect solutions that use ELCON high performance CROWN BAND technology and mate directly with a printed circuit board edge or with a solid bus bar. The modular design offers a combination of power, signal and mixed modules, which are rated at 35 Amps per contact.
-
FLATPAQ Connectors
- FLATPAQ connectors provide hot-pluggable AC and DC power in board-to-board applications. Customizable configurations of up to 45 Amps per contact, signal and logic lines, guides (both active and passive) are enabled by the assembly of various standard modules (see Connector Layout Form).
-
Guide Hardware
- We offer several lines of Guide Hardware - the Universal Power Module (UPM) Guide Modules, the MULTIGIG RT Guide Modules, and the AdvancedTCA Guide Modules. Each category offers several options of guide pins and guide modules, at different sizes and lengths, as well as keyed and unkeyed configurations.
-
Hermaphroditic Blade and Receptacle Connectors
- These in-line connectors are designed to make faster and easier connections of aluminum-clad printed circuit boards for LED lighting applications that include lighting controls and LED light modules. The low-profile, surface-mount connector uses a hermaphroditic blade and receptacle design to allow LED printed circuit board strips to be joined with more flexibility than with traditional post-and-receptacle headers.
-
ICCON Power Connectors
- ICCON connectors provide a reliable high current power interconnection with quick connect/disconnect function for space constrained motherboard - daughtercard, cable-to-board and busbar power delivery applications. ICCON power connectors come in parallel, perpendicular and stacked housings; are rated at 35 Amps; have true press-fit or solder tails; and offer a pin locking feature.
-
Mini CROWN EDGE Connectors
- Mini CROWN EDGE connectors are low-profile, high-current power connectors for pluggable 1U and 2U voltage regulator modules (VRM). Mini CROWN EDGE connectors are specifically designed for VRM 10.2 that can carry 150 - 200A.
-
MINIPAK HD Connectors
- Designed to the PICMG MicroTCA.0 Standard, the MINIPAK HD Connector combines 24 power contacts and 72 high density signal contacts in a backplane connector. The power contacts are the industry proven Universal Power Module (UPM) power contacts and are rated at 14.5 Amps per contact.
-
MINIPAK HDE Connectors
- The MINIPAK HDE connector is a power module designed to serve in both backplane power distribution and general pcb-to-pcb applications. The HDE uses the industry proven Universal Power Module (UPM) power contacts, rated at 18 Amps per contact. This connector offers low mating force, two-level contact sequencing for mate-first-break-last operation and has a one-piece molded housing for cost effectiveness.
-
MINIPAK HDL Connectors
- The MINIPAK HDL Connector combines a high density power interface into a blind-mateable board-to-board connector, which stands only 8mm off the edge of the printed circuit board. The MINIPAK HDL connector consists of a right-angle to right-angle connection, utilizing eye of the needle tails that can be used for press-fit or solder applications, and the contacts are rated at 16 Amps per contact.
-
MULTI-BEAM XL and XLE Connectors
- The MULTIBEAM XL Family are combination power and signal, blindmate, board-to-board/cable-to-board power distribution connectors. The MULTI-BEAM product is custom configurable with options from right-angle/vertical, to solder/press-fit, to contact sequencing (see Connector Layout Form).
-
MULTIGIG RT Modules
- Designed specifically for use with our 2mm Backplane Connectors, the MULTIGIG RT power modules are made from high conductivity copper alloys, and can deliver 120 Amps per linear inch.
-
SMT and Thru-Hole Poke-In Connectors
- The surface mount and through hole poke-in LED connectors offer quick and reliable wire termination as a low-labor alternative to hand soldering wires particularly when used with single-sided aluminum clad circuit boards.
-
Standard Edge/SEC-II Products
- Standard Edge II connectors are offered with/without mounting ears, for rack mounting and soldering and provide high reliability and economy in packages compatible with industry standards for double sided printed circuit boards. The SEC-II Power Connectors offer an ideal combination of low-current and high-current connections in a single, durable design in a variety of combinations of power and signal contacts.
-
Universal Power Modules (UPM)
- Universal Power Modules are designed to complement our 2mm Backplane Connectors, and are offered in both Standard Power (10 Amps per contact) and High Power (16 Amps per contact) delivering up to 100 Amps per linear inch.
